Direct analysis of anabolic steroids in urine using Leidenfrost phenomenon assisted thermal desorption-dielectric barrier discharge ionization mass spectrometry

Rapid detection of trace level anabolic steroids in urine is highly desirable to monitor the consumption of performance enhancing anabolic steroids by athletes. The present article describes a novel strategy for identifying the trace anabolic steroids in urine using Leidenfrost phenomenon assisted thermal desorption (LPTD) coupled to dielectric barrier discharge (DBD) ionization mass spectrometry. Using this method the steroid molecules are enriched within a liquid droplet during the thermal desorption process and desorbed all-together at the last moment of droplet evaporation in a short time domain. The desorbed molecules were ionized using a dielectric barrier discharge ion-source in front of the mass spectrometer inlet at open atmosphere. This process facilitates the sensitivity enhancement with several orders of magnitude compared to the thermal desorption at a lower temperature. The limits of detection (LODs) of various steroid molecules were found to be in the range of 0.05–0.1 ng mL⁻¹ for standard solutions and around two orders of magnitude higher for synthetic urine samples. The detection limits of urinary anabolic steroids could be lowered by using a simple and rapid dichloromethane extraction technique. The analytical figures of merit of this technique were evaluated at open atmosphere using suitable internal standards. The technique is simple and rapid for high sensitivity and high throughput screening of anabolic steroids in urine.     

Mechanisms and kinetics of trisodium 2-hydroxy-1,1'-azonaphthalene-3,4',6-trisulfonate adsorption onto chitosan

Chitosan, a naturally abundant biopolymer, has widely been studied for metal adsorption from various solutions, but the extension of chitosan as an adsorbent to remove organic substances from water and wastewater has seldom been explored. In this study, the adsorption of an azo dye, trisodium 2-hydroxy-1,1'-azonaphthalene-3,4',6-trisulfonate (1), from aqueous solution onto the various degrees of deacetylated chitosan has been investigated. Equilibrium studies have been carried out to determine the capacity of chitosan for dye. The experimental data were analyzed using two isotherm correlations, namely, Langmuir and Freundlich equations. The linear correlation coefficients were determined for each isotherm and the Langmuir provided the best fit. The experimental adsorption isotherms were perfectly reproduced in the simulated data obtained from numerical analysis on the basis of the Langmuir model and the isotherm constants. Adsorption of (1) onto the chitosan flakes was found to be strongly depending on degrees of deacetylation in chitosan and temperatures. Significant amounts of (1) were adsorbed by chitosan 8B (higher degree of deacetylated chitosan), but the adsorption capacity was reduced remarkably with increasing solution temperatures. Thermodynamic parameters such as change in free energy (DeltaG), enthalpy (DeltaH), and entropy (DeltaS) were also determined. In addition, kinetic study indicated that the adsorption process mechanisms were both transport- and attachment-limited.     

Ionic liquid-promoted dehydration of aldoximes: a convenient access to aromatic, heteroaromatic and aliphatic nitriles

A simple and convenient procedure for the synthesis of nitriles by dehydration of aldoximes using an ionic liquid, 1-pentyl-3-methylimidazolium tetrafluoroborate, [pmim]BF₄ under organic solvent-free condition, has been developed. A variety of aromatic, heteroaromatic and aliphatic aldoximes are converted to the corresponding nitriles. The ionic liquid is recovered and reused for subsequent reactions.     

Multi-walled carbon nanotubes coated by multi-layer silica for improving thermal conductivity of polymer composites

Silica has been non-covalently coated on multi-walled carbon nanotubes (MWCNTs) using the sol–gel chemistry, where tetraethoxy silane (TEOS) was used to form an inorganic silica layer immediately next to surface of MWCNTs and octyl triethoxy silane was coated over the TEOS. Transmission electron microscopy (TEM) measurements show that the diameter of MWCNTs increases with increasing the number of coating layer, indicating that the silica has been coated on MWCNTs. Quantitative analysis from thermogravimetric analysis (TG) also indicates that the inorganic and organic silica has been successfully coated on MWCNTs. Further, quantitative analysis found that the amount of silica measured by TG agrees well with the increase of thickness of coated MWCNTs obtained from TEM, indicating that little or no free silica exists in the system. The thermal conductivity of epoxy/MWCNTs composite was studied and the results show that the thermal conductivity of the composite is improved by coating MWCNTs in this manner and increases with increasing the number of coatings.     

Dual interpretation of electromagnetic fields in general relativity

An energy stress tensor satisfying Rainich's algebraic relations along with a specified metric tensor sometimes admits two alternative Maxwell fields-one with a nonvanishing current vector as source and the other without any source. This paper investigates the conditions for the existence of a source-free interpretation when a with source solution with various types of the source current vector (i.e., timelike, null, or spacelike) is known and illustrates the results with some examples. It turns out that in the case of timelike currents, a dual interpretation requires this to be a purely convection current, while in other cases a dual interpretation is possible only if the conductivity is infinite and the conduction current is in the direction of the magnetic field.     

Polymer‐Chlorambucil Drug Conjugates: A Dynamic Platform of Anticancer Drug Delivery

Recently, polymer drug conjugates (PDCs) have attracted considerable attention in the treatment of cancer. In this work, a simple strategy has been developed to make PDCs of an antitumor alkylating agent, chlorambucil, using a biocompatible disulphide linker. Chlorambucil‐based chain transfer agent was used to prepare various homopolymers and block copolymers in a controlled fashion via reversible addition–fragmentation chain transfer polymerization. Chlorambucil conjugated block copolymer, poly(polyethylene glycol monomethyl ether methacrylate)‐b‐poly(methyl methacrylate), formed nanoaggregates in aqueous solutions, which are characterized by dynamic light scattering and field emission‐scanning electron microscopy. Finally, the simplicity of the design is exemplified by performing a release study of chlorambucil under reducing condition by using D,L‐dithiothreitol.

     

Electron transfer reactions of nickel(III) and nickel(IV) complexes

This review narrates the electron transfer reactions of various nickel(III) and nickel(IV) complexes reported during the period 1981 until today. The reactions have been categorized mainly with respect to the type of nickel complexes. The reactivity of nickel(III) complexes of macrocycles, 2,2′-bipyridyl and 1,10-phenanthroline, peptides and oxime–imine, and of nickel(IV) complexes derived from oxime–imine, oxime and miscellaneous ligands with various organic and inorganic electron donors have been included. Kinetic and mechanistic features associated with such interactions have been duly analyzed. The relevance of Marcus cross-relation equations in the delineation of the electron transfer paths has also been critically discussed.     

Modeling and experimental studies on combustion characteristics of porous coal char: Volume reaction model

A generalized single‐particle model for the prediction of combustion dynamics of a porous coal char in a fluidized bed is analyzed in the present work using a volume reaction model (VRM). A fully transient nonisothermal model involving both heterogeneous and homogeneous chemical reactions, multicomponent mass transfer, heat transfer with intraparticle resistances, as well as char structure evolution is developed. The model takes into account convection and diffusion inside the particle pores, as well as in the boundary layer. By addressing the Stefan flow originated due to nonequimolar mass transfer and chemical reactions, this work enables a more realistic analysis of the combustion process. The model, characterized by a set of partial differential equations coupled with nonlinear boundary conditions, is solved numerically using the implicit finite volume method (FVM) with a FORTRAN code developed in‐house. The use of a FVM for solving such an elaborate char combustion model, based on the VRM, was not reported earlier. Experiments consisting of fluidized‐bed combustion of a single char particle were carried out to determine the internal surface area of a partially burned char particle and to enable model validation. Predicted results are found to compare well with the reported experimental results for porous coal char combustion. The effects of various parameters (i.e., bulk temperature and initial particle radius) are examined on the dynamics of combustion of coal char. The phenomena of ignition and extinction are also investigated. © 2010 Wiley Periodicals, Inc. Int J Chem Kinet 42: 299–315, 2010     

Separation of lignosulfonate from its aqueous solution using supported liquid membrane

This paper presents an experimental and theoretical study on facilitated transport of lignosulfonate (LS) through a flat sheet supported liquid membrane using trioctylamine (TOA) as carrier and dichloroethane as diluent. The studies were carried out with various support materials and operating conditions (viz. carrier concentration, strip phase concentration, salt concentration, etc.) and their effects on the transport of LS. The results were analyzed to identify a suitable combination of support and operating condition that would yield best performance of the supported liquid membrane (SLM) in terms of fast and efficient transport of LS. The stability of the SLM was assessed in terms of loss of liquid from the pores of membrane support. The SLM is found to be stable till 10 h. Co-transport mechanism has been adopted in this work by using NaOH as the strip phase. It was observed that extraction of LS is increased with increase in concentration of NaOH up to a limiting value of 0.5 M NaOH. Difference of salt concentration between feed and strip phase considerably affect the separation process. The diffusional resistances of organic membrane (Δorg) and aqueous solution (Δaq) calculated from the permeation model, which is again a combination of three unique mechanisms viz., diffusion through a feed aqueous layer, a fast interfacial chemical reaction, and diffusion of carrier–complex through the organic membrane, are found to be 609.9 and 176.6 s cm⁻¹, respectively. The values of the diffusion coefficient in the membrane (D_org) and in the bulk organic phase (D_complex) are 1.67×10⁻⁹ and 6.68 × 10⁻⁸ m²s⁻¹, respectively. The extraction of LS is about 90%. Nearly 43% of LS can be recovered at optimum condition.     

Fe(III) chloride catalyzed conversion of epoxides to acetonides

A mild and efficient method for the preparation of acetonides from epoxides catalyzed by iron(III) chlorides has been developed.