Studies on morphology of polyaniline films formed at liquid–liquid and solid–liquid interfaces at 25 and 5 °C,respectively, and effect of doping

It is well accepted that the morphology of the nanomaterials has great effect on the properties and hence their applications. Therefore, morphology of materials has become a focus of research in the scientific world. The present study shows that interfacial polymerization and subsequent self-assembly provides a control over the morphology, nanorod/nanosheet, of polyaniline (PANI) films synthesized by liquid–liquid interface reaction technique and solid–liquid interface reaction technique. The synthesized PANI films and its particulate structure are characterized by using various spectroscopic techniques such as UV–visible, ATR-IR, Raman and XPS. The study confirmed the formation, the structure, the size and shape of particles and morphology of PANI by using analytical techniques namely, SAED, SEM and TEM. An important observation is that doping with HCl significantly improves the nanorod formation at the interface. The doped PANI electrode exhibits a higher area with rectangular shape in CV cycle and better cycle stability when compared with the performance of undoped PANI films. We believe that the results of these studies can give valuable leads to manoeuvre formation of PANI films with desired morphology for various applications.

Acetic acid catalysed solvent-free synthesis of spiro-isoxazolo[5,4-b]pyridines/quinolines by mechano-chemical grinding

A simple and efficient three-component procedure has been developed for the synthesis of a series of spiro-isoxazolo[5,4-b]pyridines/quinolines by one-pot condensation of isatins, 3-methylisoxazol-5-amine and enolizable cyclic carbonyl compounds. The protocol has been accomplished under solvent-free conditions by grinding the components at room temperature in presence of catalytic CH₃COOH. The described process offers environmentally benign reaction conditions for the synthesis of pharmacologically important spirooxindole fused heterocycles with the advantages ofoperational simplicity, short reaction time and good to excellent yields of isolated pure product.     

Effect of sintering temperature and the particle size on the structural and magnetic properties of nanocrystalline Li0.5Fe2.5O4

Sintering temperature and particle size dependent structural and magnetic properties of lithium ferrite (Li_0.5Fe_2.5O₄) were synthesized and sintered at four different temperatures ranging from 875 to 1475 K in the step of 200 K. The sample sintered at 875 K was also treated for four different sintering times ranging from 4 to 16 h. Samples sintered at 1475 K have the cubic spinel structure with a small amount of α-Fe₂O₃ (hematite) and γ-Fe₂O₃ (maghemite). The samples sintered at≤1275 K do not show hematite and maghemite phases and the crystals form the single phase spinel structure with the cation ordering on octahedral sites. Particle size of lithium ferrite is in the range of 13-45 nm, and is depend on the sintering temperature and sintering time. The saturation magnetization increased from 45 to 76 emu/g and coercivity decreases from 151 to 139 Oe with an increase in particle size. Magnetization temperature curve recorded in ZFC and FC modes in an external magnetic field of 100 Oe. Typical blocking effects are observed below about 244 K. The dielectric constant increases with an increase in sintering temperature and particle size.     

Emission analysis of Dy and Pr:Bi2O3-ZnF2-B2O3-Li2O-Na2O glasses

In this paper, we present the spectral results of Dy³⁺ and Pr³⁺ (1.0 mol%) ions doped Bi₂O₃-ZnF₂-B₂O₃-Li₂O-Na₂O glasses. Measurements of X-ray diffraction (XRD), differential scanning calorimetry (DSC) profiles of these rare-earth ions doped glasses have been carried out. From the DSC thermograms, glass transition (T_g), crystallization (T_c) and melting (T_m) temperatures have been evaluated. The direct and indirect optical band gaps have been calculated based on the glasses UV absorption spectra. The emission spectrum of Dy³⁺:glass has shown two emission transitions ⁴F_7/2→⁶H_15/2 (482 nm) and ⁴F_7/2→⁶H_13/2 (576 nm) with an excitation at 390 nm wavelength and Pr³⁺:glass has shown a strong emission transition ¹D₂→³H₄ (610 nm) with an excitation at 445 nm. Upon exposure to UV radiation, Dy³⁺ and Pr³⁺ glasses have shown bright yellow and reddish colors, respectively, from their surfaces.     

Molecular docking,synthesis and anticonvulsant activity of some novel 3-(2-substituted)-4-oxothiazolidine-3-yl)-2-phenylquinazoline-4(3H)-ones

Research on Chemical Intermediates - As the therapeutic potential of quinazolinone and thiazolidinone is well mentioned in literature for their versatile biological activities, their related...     

Alkali Metal–Promoted Facile Synthesis of Secondary Amines from Imines and Carbodiimides

We present here an efficient method for the hydroboration of aldimines (-C=N-) with pinacolborane (HBpin) using an alkali metal catalyst, potassium benzyl. The reaction was accomplished with unprecedented catalytic efficiency under mild and solvent-free conditions to afford the high yield of the corresponding N-boryl amines up to 97%. Various functionalities on aldimines were incorporated for hydroboration. The corresponding boryl amines were subjected to further hydrolysis to yield the corresponding secondary amines with good yields up to 89%. This protocol for the reaction demonstrates an atom-economic and green method with diverse imines that bears excellent functional group tolerance. Chemoselective reduction of imines was also attained, with good yields of 74–89%. We also propose the most plausible mechanism involving the formation of metal hydride as the active pre-catalyst.     

Bioavailability studies of oral dosage forms containing levodopa and carbidopa using column-switching chromatography followed by electrochemical detection

A reliable multi-dimensional column chromatographic method employing amperometric detection using a carbon fibre microelectrode procedure was used for monitoring the plasma profiles and to evaluate the pharmacokinetics and bioavailability of levodopa (L-dopa) and carbidopa (C-dopa), after ingestion of oral formulations containing these drugs. The peak currents obtained for the different analytes were directly proportional to the analyte over the concentration range 0.02-4 micrograms ml-1. Using this method, the minimum detectable concentration was estimated to be 5 and 8 ng ml-1 for L-dopa and C-dopa, respectively. Recovery studies ranged from 93.83 to 89.76%, with a relative standard deviation of less than 7%. The study was carried out in two separate weeks on five healthy non-patient fasted male/female volunteers in the age range 20-37 years and weighing between 60 kg and 78 kg. The pharmacokinetic profile of two controlled-release products containing both L-dopa and C-dopa (Sinemet CR3 and CR4) was compared on the one hand and Sinemet conventional tablets on the other. The pharmacokinetic parameters, peak concentration (Cmax), the time taken to obtain this level (Tmax), elimination half-time T1/2, elimination rate constant (Kel), plasma level ratio, fluctuation index (FI) and the area under the time-concentration curve (AUC0-8), were investigated for each individual formulation. A comparison of the uptake of L-dopa from the conventional formulation showed that L-dopa entered the plasma and achieved peak levels higher than that of the controlled release formulations. However, it showed a much higher fluctuation index and the plasma concentrations were more stable with the controlled release formulations. The data also indicated a very low accumulation of both levodopa and carbidopa following repeated administration of the drugs, which was consistent with their relatively short half-lives (less than 2 h). In contrast, the half-life for the metabolite 3-orthomethyl dopa (3-OMD) is in the order of 13 h. As a result, there was an extensive accumulation of 3-OMD and its levels were significantly higher than those of levodopa or carbidopa upon repeated administration. Urine recoveries of the three analytes over one 8 h dosing interval showed that the majority of the excreted levodopa and carbidopa was recovered during the first 4 h, and there is proportionally greater excretion of the carbidopa dose than the levodopa dose.     

Dispersion and reactivity of copper catalysts supported on Al2O3-ZrO2

A series of CuO/Al(2)O(3)-ZrO(2) catalysts with Cu loadings varying from 1.0 to 20 wt % were prepared and characterized by X-ray diffraction (XRD), temperature-programmed reduction (TPR), temperature-programmed desorption (TPD) of CO(2) and NH(3), electron spin resonance (ESR), and Brunauer-Emmett-Teller surface area measurements. The dispersion and metal area of copper were determined by the N(2)O decomposition method. XRD results suggest that the copper oxide is present in a highly dispersed amorphous state at copper loadings < 10 wt % and as a crystalline CuO phase at higher Cu loadings. ESR results suggest the presence of two types of copper species on the Al(2)O(3)-ZrO(2) support. TPR results suggest well-dispersed copper oxide species at low Cu loadings and crystalline copper oxide species at high Cu loadings. Well-dispersed copper oxide species were reduced more easily than large copper oxide species by H(2). The results of CO(2) TPD suggest that the basicity of the catalysts was found to increase with an increase of copper loading up to 5.0 wt % and decreases with a further increase of copper loading. The results of NH(3) TPD suggest that the acidity of the catalysts was found to decrease with an increase of copper loading up to 5.0 wt % and increases with a further increase of copper loading. The catalytic properties were evaluated for the vapor-phase dehydrogenation of cyclohexanol to cyclohexanone and correlated with the results of CO(2) TPD measurements and the dispersion of Cu on the Al(2)O(3)-ZrO(2) support.     

Selenadiazolopyridine: a synthon for supramolecular assembly and complexes with metallophilic interactions

The synthesis and characterization of the complexes of Cu(I), Ag(I), Cu(II), and Co(II) ions with 1,2,5-selenadiazolopyridine (psd) is reported. The following complexes have been prepared: [Cu(2)(psd)(3)(CH(3)CN)(2)](2+)2(PF(6)(-)); [(CuCl)(2)(psd)(3)]; [Cu(2)(psd)(6)](2+)2(ClO(4))(-); [Ag(2)(psd)(2)](2+)2(NO(3))(-); [Ag(2)(psd)(2)](2+)2(CF(3)COO)(-); [Cu(psd)(2)(H(2)O)(3)](2+)2(ClO(4))(-)·(psd)(2); [Cu(psd)(4)(H(2)O)](2+)2(ClO(4))(-)·(CHCl(3)); [Cu(psd)(2)(H(2)O)(3)](2+)2(NO(3))(-)·(H(2)O)·(psd)(2), and [Co(psd)(2)(H(2)O)(4)](2+)2(ClO(4))(-)·(psd)(2). The electronic structure of ligand psd, in particular the bond order of Se-N bonds, has been probed by X-ray diffraction, (77)Se NMR, and computational studies. A detailed analysis of the crystal structures of the ligand and the complexes revealed interesting supramolecular assembly. The assembly was further facilitated by the presence of neutral ligands for some complexes (Cu(II) and Co(II)). The molecular structure of the ligand showed that it was present as a dimer in the solid state where the monomers were linked by strong secondary bonding Se···N interactions. The crystal structures of Cu(I) and Ag(I) complexes revealed the dinuclear nature with characteristic metallophilic interactions [M···M] (M = Cu, Ag), while the Cu(II) and Co(II) complexes were mononuclear. The presence of M···M interactions has been further probed by Atoms in Molecules (AIM) calculations. The paramagnetic Cu(II) and Co(II) complexes have been characterized by UV-vis, ESI spectroscopy, and room temperature magnetic measurements.