Analysis of Ethylene/1‐Olefin Copolymers Made with Ziegler–Natta Catalysts by Deconvolution of Molecular Weight and Average Short Chain Branching Distributions

In this article a systematic method is proposed to deconvolute the time‐dependent molecular weight distributions (MWD) and average comonomer fraction profiles of ethylene/1‐olefin copolymers made with heterogeneous Ziegler–Natta catalysts. These distributions with a high‐temperature gel permeation chromatography equipped with an infrared detector at four different polymerization times have been measured and used this information to infer how the fractions of polymer made on each site type varied with polymerization time. The model estimates here the minimum number of active site types needed to describe these copolymers, the MWD of polymer populations made on each site type, and their average comonomer fractions. This method is useful to quantify the microstructure of olefin copolymers made with multiple site type catalysts using the least number of adjustable parameters.

     

Synthesis of 2-Mercaptonicotinic Acid-Capped CdSe Quantum Dots and its Application to Spectrofluorometric Determination of Cr(VI) in Water Samples

The CdSe quantum dots (QDs) capped with 2-mercaptonicotinic acid (H₂MN) were prepared through a controllable process at 80 °C. The prepared QDs were characterized by XRD, TEM, IR, UV–Vis and fluorescence (FL) techniques. It was found that the QDs were nearly mono-disperse with the diameters in the range of 8–10 nm. These QDs are capable to exhibit strong FL even in concentrated acidic media. They exhibit an enhanced fluorescence in the presence of Cr(VI), which was used for the determination of Cr(VI) in water samples. The linear range was found to be 1?×?10^?7–6.0?×?10^?6 M with the RSD and DL of 0.92 % and 5?×?10^?8 M, respectively. Except that Ca²⁺ and Fe³⁺ which can be eliminated through a simple precipitation process, the other co-existent ions present in natural water were not interfered. The recoveries obtained for the added amounts of Cr(VI) were in the range of 96.9–103.2 %, which denote on application of the method, satisfactorily.     

A New Polymer of Mixed‐Anions Complex [Pb(phen)(O2CCH3)(O2NO)]n (phen = 1,10‐phenanthroline)

The single crystal X‐ray data of a mixed anions complex of Pb^II with 1,10‐Phenantroline, [Pb(phen)(O₂CCH₃)‐ (O₂NO)], shows the complex to be polymeric as a result of acetate ligand bridging. The Pb atom has an asymmetrical eightfold coordination of two nitrogen atoms of the 1,10‐phenanthroline ligand and six oxygen atoms of the nitrate and acetate anions. The arrangement of the 1,10‐phenantroline ligand, acetate and nitrate anions suggest a gap in the coordination around the Pb^II ion, occupied possibly by a stereoactive lone pair of electrons on lead(II) where the coordination around the lead atoms is hemidirected. There is a π‐π stacking interaction between the parallel aromatic rings of an adjacent chain in the compound which might help to increase the ‘gap' in the coordination around the Pb^II ion.     

Dielectrophoretic manipulation and separation of microparticles using curved microelectrodes

This paper presents the development and experimental analysis of a dielectrophoresis (DEP) system, which is used for the manipulation and separation of microparticles in liquid flow. The system is composed of arrays of microelectrodes integrated to a microchannel. Novel curved microelectrodes are symmetrically placed with respect to the centre of the microchannel with a minimum gap of 40 μm. Computational fluid dynamics method is utilised to characterise the DEP field and predict the dynamics of particles. The performance of the system is assessed with microspheres of 1, 5 and 12 μm diameters. When a high‐frequency potential is applied to microelectrodes a spatially varying electric field is induced in the microchannel, which creates the DEP force. Negative‐DEP behaviour is observed with particles being repelled from the microelectrodes. The particles of different dimensions experience different DEP forces and thus settle to separate equilibrium zones across the microchannel. Experiments demonstrate the capability of the system as a field flow fraction tool for sorting microparticles according to their dimensions and dielectric properties.     

A novel and simple method for finding the heterogeneity of adsorbents on the basis of adsorption kinetic data

The heterogeneity of adsorbent was characterized by a novel and simple method that uses adsorption kinetic data from solution. On the basis of different simulated adsorption kinetic data for heterogeneous adsorbents with two different adsorption sites, it was found that there is a deviation from linearity in pseudo-second-order adsorption kinetic models. The patterns of obtained diagrams (t/qt vs t) shows five main classes of adsorption. On the basis of this novel and simple method it is possible to show that the surface of adsorbents is homogeneous or heterogeneous, and in the case of heterogeneous surfaces it is possible to find the differences between adsorption sites. For finding kinetic constants of adsorption on heterogeneous surfaces with two different sites, a new equation was presented and called the two-site pseudo-second-order (TS-PSO) model. Finally, some experimental kinetic data of adsorption were analyzed by the new method.     

Reflection and transmission at normal incidence onto air-saturated porous materials and direct measurements based on parametric demodulated ultrasonic waves

The present work is related to the characterization of air-saturated porous media by using parametric demodulated ultrasonic waves. One uses two different powerful ultrasonic emitters working either at 47 kHz or at 162 kHz which are electronically amplitude modulated over the 200 Hz-4 kHz or 2 kHz-40 kHz bandwidths respectively. The demodulation process takes place in air, due to its nonlinearity enabling to generate audio range acoustical waves or alternatively low frequency ultrasonic waves which can be used to characterize porous materials in the reflection configuration at normal incidence. Some appropriate theoretical calculations are introduced for three configurations of interest, i.e. a porous slab, a porous layer mounted onto a rigid plate, and a porous half space, in the case of the equivalent-fluid model. Comparisons between theoretical modeling and experimental data are provided and prospective industrial applications are discussed.     

Synthesizing UHMWPE Using Ziegler-Natta Catalyst System of MgCl2(ethoxide type)/ TiCl4/tri-isobutylaluminum

Summery: A Ziegler-Natta catalyst of MgCl₂ (ethoxide type)/TiCl₄ has been synthesized. In order to obtain ultra high molecular weight polyethylene (UHMWPE) tri-isobutylaluminum which is less active to chain transfer was used as cocatalyst. Slurry polymerization was carried out for the polymerization of ethylene while, dilute solution viscometry was performed for the viscosity average molecular weight (Mv) measurement. The effect of [Al]/[Ti] molar ratio, temperature, monomer pressure and polymerization time on the Mv and productivity of the catalyst have been investigated. The results showed increasing [Al]/[Ti] ratio in the range of 78–117, decreased the Mv of the obtained polymer from 7.8 × 10⁶ to 3.7 × 10⁶ however, further increase of the ratio, resulted in decreased of by much slower rate up to [Al]/[Ti] = 588. The higher pressure in the range of 1–7 bars showed the higher the Mv of the polymer obtained, while increasing temperature in the range of 50 to 90 °C decreased the Mv from 9.3 × 10⁶ to 3.7 × 10⁶. The Mv rapidly increase with polymerization time in the first 15 minutes of the reaction, this increase was slowly up to the end of the reaction (120 min). Increasing [Al]/[Ti] ratio raised productivity of the catalyst in the range studied. Rising reaction temperature from 50 to 75 °C increased the productivity of the catalyst however, further increase in the temperature up to the 90 °C decreased activity of the catalyst. Monomer pressure in the range 1 to 7 bars yields higher productivity of the catalyst. Also by varying polymerization conditions synthesizing of UHMWPE with Mv in the range of 3 × 10⁶ to 9 × 10⁶ was feasible.     

Laser ultrasonic receivers based on organic photorefractive polymer composites

We present two laser ultrasonic receivers based on organic photorefractive polymer composites with 2-[4-bis(2-methoxyethyl)aminobenzylidene]malononitrile (AODCST) or 2-dicyanomethylen-3-cyano-5,5-dimethyl-4-(4′-dihexylaminophenyl)-2,5-dihydrofuran nonlinear optical chromophores. Experimental results show sensitivities of the ultrasonic receivers of ~9.5 × 10^?8 nm (W/Hz)^0.5 for both composites, and a faster response time (~60 ms) for the AODCST-based laser ultrasonic receiver. We show that such LUS detectors are highly suitable for contactless thickness measurements of aluminum, steel sheets and defect detection with an accuracy of 100 μm.     

Synthesis and characterization of two new fluorescent macrocycles: A novel fluorescent chemosensor for zinc ion

Two new macrocyclic systems (L¹, L²) containing two emissive naphthalene were synthesized and characterized. The macrocycles were studied by ¹H NMR, ¹³C NMR, COSY, HMQC, DEPT, microanalysis and mass spectroscopy. The influence of metal cations Na⁺, Cr³⁺, Mn²⁺, Fe³⁺, Co²⁺, Ni²⁺, Cu²⁺, Zn²⁺, Cd²⁺, and Hg²⁺ on the spectroscopic properties of the macrocyclic systems in acetonitrile/DMF 9:1 (v/v) mixtures were investigated by means of absorption and emission spectrophotometry. The macrocycle L¹ was found to be as an effective fluorescence sensor for Zn²⁺ ions. Zn²⁺ and Cd²⁺ ions show the most effects on the fluorescence intensity of L².