A green one-pot synthesis of N-alkyl-2-(2-oxoazepan-1-yl)-2-arylacetamide derivatives via an Ugi four-center,three-component reaction in water

This work describes a green and efficient one-pot synthesis of N-alkyl-2-(2-oxoazepan-1-yl)-2-arylacetamide derivatives via an Ugi four-center, three-component reaction of 6-aminohexanoic acid, aromatic aldehydes, and isocyanide derivatives in water under reflux conditions in the absence of a catalyst.     

Healable dual organic–inorganic crosslinked sol–gel based polymers: Crosslinking density and tetrasulfide content effect

In this article, the first generation of healable sol–gel based polymers is reported. A dual organic–inorganic crosslinked network is developed containing non‐reversible crosslinks and reversible (tetrasulfide) groups. The designed polymer architecture allows thermally induced mesoscale flow leading to damage closure followed by interfacial strength restoration due to reformation of the reversible groups. While the reversible bonds are responsible for the flow and the interface restoration, the irreversible crosslinks control the required mechanical integrity during the healing process. The temperature dependent gap closure kinetics is strongly affected by the crosslinking density and tetrasulfide content. Raman spectroscopy is used to explain the gap closure kinetics in air and dry nitrogen. © 2014 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2014 , 52, 1953–1961     

Reversible fixation and release of carbon dioxide with a binary system consisting of polyethylene glycol and polystyrene‐bearing cyclic amidine pendant group

In this study, we investigated the CO₂‐capture/release behavior of the polystyrene‐bearing cyclic amidine pendant groups, which was synthesized via free radical polymerization of HCl salt of the corresponding styrene monomer followed by neutralization. For comparison, we also prepared the polystyrene bearing N‐formyl‐1,3‐propanediamine pendant groups through the hydrolysis of the cyclic amidine group by treatment with an alkaline solution. First, we examined the CO₂‐capture/release behaviors of the amidine and amine monomers in aqueous solution in terms of conductivity. The conductivity of a wet DMSO solution of the amidine monomer increased upon CO₂ bubbling at 25 °C and reached a stationary value of about 11 mS/m, which indicated the formation of the bicarbonate salt. Conversely, the conductivity decreased to its original value upon N₂ bubbling at 50 °C, reflecting the complete release of the trapped CO₂ molecules. Both solutions showed the changes in the conductivity with quick responses, and no appreciable difference was observed between them. We then investigated the CO₂‐capture/release behaviors of the amidine and amine polymers, by taking advantage of the binary system with polyethylene glycol, and found that the binary system with the amidine polymer captured and released CO₂ more efficiently than that with the amine polymer. © 2014 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2014 , 52, 2025–2031     

Phosphido‐diphosphine pincer aluminum complexes as catalysts for ring opening polymerization of cyclic esters

New aluminum alkyl complexes, supported by o‐phenylene‐derived phosphido diphosphine pro‐ligands [Ph‐PPP]‐H and [ⁱPr‐PPP]‐H ([Ph‐PPP]‐H = bis(2‐diphenylphosphinophenyl)phosphine; [ⁱPr‐PPP]‐H = bis(2‐diisopropylphosphinophenyl)phosphine) are reported. Compounds [Ph‐PPP]AlMe₂ ( 1 ), [ⁱPr‐PPP]AlMe₂ ( 2 ), and [Ph‐PPP]AlⁱBu₂ ( 3 ) have been synthesized by reaction of the pro‐ligand with the appropriate trialkyl aluminum precursor and have been characterized by ¹H, ¹³C and ³¹P NMR spectroscopy. The solution NMR data and theoretical calculations suggest for all complexes trigonal bipyramidal structures with C_2v symmetry in which the phosphido diphosphine ligand acts as a κ³ coordinated ligand. All complexes promote the ring‐opening polymerization of ε‐caprolactone, L‐ and rac‐lactide. Polyesters with controlled molecular parameters (M_n, end groups) and low polydispersities are obtained. Upon addition of isopropanol, efficient binary catalytic systems for the immortal ring‐opening polymerization of the cyclic esters are produced. Preliminary investigations show the ability of these complexes to promote copolymerization of l ‐lactide and ?‐caprolactone to achieve copolymers whose microstructures are depending on the structure of the catalyst. © 2013 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2014 , 52, 49–60     

Synthesis,X‐ray Studies,and Catalytic Efficacy of a Novel Iron Complex Containing an N,O‐Type Bidentate Thiazoline Ligand

The reactions of FeCl₃ · 6H₂O and 2‐(2′‐hydroxyphenyl)‐2‐thiazoline as a bidentate O‐N donor thiazoline ligand (thoz) afford a five‐coordinate Fe^III complex [Fe(thoz)₂Cl] with a distorted square pyramidal configuration. Complex [Fe(thoz)₂Cl] was isolated as air‐stable crystalline solids and fully characterized, including by single‐crystal X‐ray structure analysis. Complex [Fe(thoz)₂Cl] shows very efficient reactivity in the oxidation of sulfides to their corresponding sulfoxides using urea hydrogen peroxide (UHP) as the oxidant at room temperature in air.     

Novel Four-Step Synthesis of Thioxo-quinazolino[3,4-a]quinazolinone Derivatives

A novel synthesis of thioxo-quinazolino[3,4-a]quinazolinone framework was developed through a four-step reaction starting from isatoic anhydride. The resulting 2-aminobenzamides from the reaction of isatoic anhydride and different amines underwent coupling–cyclization reaction with 2-nitrobenzaldehydes, reduction of nitro group, and then cyclization reaction with carbon disulfide (CS₂). All steps were carried out under easy and user-friendly conditions in a short time without using expensive catalysts or reagents.

[Supplementary materials are available for this article. Go to the publisher's online edition of Synthetic Communications® for the following free supplemental resource(s): Full experimental and spectral details.]     

Vilsmeier Reagent: An Efficient Reagent for the Transformation of 2-Aminobenzamides into Quinazolin-4(3H)-one Derivatives

Clean and easy preparation of quinazolin-4(3H)-one derivatives using 2-aminobenzamides and Vilsmeier reagent is described. 2-Aminobenzamides were converted into the corresponding quinazolinones under mild and efficient conditions, in good yields without undesirable by-products.

[Supplementary materials are available for this article. Go to the publisher's online edition of Synthetic Communications® for the following free supplemental resource(s): Full experimental and spectral details.]     

Trace analysis of Pt (IV) metal ions in roadside soil and water samples by Fe3O4/graphene/polypyrrole nanocomposite as a solid-phase extraction sorbent followed by atomic absorption spectrometry

A novel Fe₃O₄/graphene/polypyrrole nanocomposite has been successfully synthesised via a simple chemical method and applied as a new magnetic solid-phase extraction (MSPE) sorbent for the separation and pre-concentration of trace amounts of Pt (IV) in environmental samples followed by flame atomic absorption spectrometric (FAAS) detection. The nanocomposite has been characterised by scanning electron microscopy (SEM), transmission electron microscopy (TEM) and Fourier transform infrared (FTIR) spectroscopy. Seven important parameters, affecting the extraction efficiency of Pt (IV), including pH, adsorption time, desorption solvent type and concentration, desorption time, elution volume and sample volume, were investigated. Under the optimised conditions, the calibration graph was linear in the range of 50–1500 μg L^?1 (R = 0.993). The detection limit and pre-concentration factor (PF) for Pt (IV) were found to be 16 μg L^?1 and 112.5, respectively. Under the optimised solid-phase extraction (SPE) conditions, the adsorption isotherm and the adsorption capacity of the nanocomposite for Pt (IV) were studied. Pt (IV) adsorption equilibrium data were fitted well to the Langmuir isotherm and the maximum adsorption capacity of the magnetic sorbent was calculated from the Langmuir isotherm model as 416.7 mg g^?1. The precision of the method was studied as intraday and interday variations. A relative standard deviation percentage (RSD%) value less than 3.0 indicates that the method is precise. Also, the accuracy of the method was tested by the analysis of the standard reference material (NIST SRM 2556) and by recovery measurements on spiked real samples. It was also shown that the optimised method was suitable for the analysis of trace amounts of Pt (IV) in roadside soil, tap water and wastewater samples.     

Novel polyimides obtained from a new aromatic diamine (BAPO) containing pyridine and 1,3,4‐oxadiazole moieties for removal of Co(II) and Ni(II) ions

Novel, thermally stable polyimides (PIs) containing a 1,3,4‐oxadiazole and pyridine moieties based on a new aromatic diamine 2,5‐bis‐(aminopyridine‐2‐yl)‐1,3,4‐oxadiazole, BAPO, were synthesized. The prepared polymers were soluble in dimethysulfoxide (DMSO) and concentrated sulfuric acid at room temperature as well as in polar and aprotic solvents, such as, N‐methylpyrrolidone (NMP) and N,N‐dimethylacetamide (DMAc) at elevated temperature. Thermal behaviors of the PIs were studied by thermogravimetric analysis/dynamic thermal analysis (TGA‐DTA) and differential scanning calorimetry (DSC). The inherent viscosities of the PI solutions were in the range of 0.38–0.61 dl/g (in DMSO with a concentration of 0.125 g/dl at 25 ± 0.5°C). The removal of Co(II) and Ni(II) ions from aqueous solutions was performed using polymer 6, which was obtained from BAPO and 3,3′,4,4′‐benzophenonetetracarboxylic dianhydride (BTDA). The maximum adsorption capacity was observed for Co(II) ion at pH = 7.0 (110.4 mg g^?1, 1.87 mmol g^?1). Copyright © 2015 John Wiley & Sons, Ltd.