Synthesis and characterization of some novel aromatic polyimides

Three new diamines 1,2-di(p-aminophenyloxy)ethylene, 2-(4-aminophenoxy)methyl-5-aminobenzimidazole and 4,4-(aminopheyloxy) phenyl-4-aminobenzamide were synthesized and polymerized with 3,3′,4,4′-benzophenone tetracarboxylic acid dianhydride (BP), 4,4′-(hexafluoroisopropyledene)diphthalic anhydride (HF) and 3,4,9,10-perylene tetracarboxylic acid dianhydride (PD) either by one step solution polymerization reaction or by two step procedure. The later includes ring opening poly-addition to give poly(amic acid), followed by cyclodehydration to polyimides with the inherent viscosities 0.62-0.97 dl/g. Majority of polymers are found to be soluble in most of the organic solvents such as DMSO, DMF, DMAc, m-cresol even at room temperature and few becomes soluble on heating. The degradation temperature of the resultant polymers falls in the ranges from 240 °C to 550 °C in nitrogen (with only 10% weight loss). Specific heat capacity at 300 °C ranges from 1.1899 to 5.2541 J g⁻¹ k⁻¹. The maximum degradation temperature ranges from 250 to 620 °C. T_g values of the polyimides ranged from 168 to 254 °C.     

Solvent extraction of trivalent lanthanide Pr(III), Ho(III) and Er(III) with N-benzoyl-N-phenylhydroxylamine

Extraction of Pr(III), Ho(III) and Er(III) has been studied in the pH range of 1–10 with N-benzoyl-N-phenylhydroxylamine (BPHA) in benzene. The separation was found to be quantitative in borate media from pH 7 to 10, at an ionic strength of 0.1M (H⁺, BO₃ ^3–). The stoichiometric composition of the complexes under the optimal conditions of shaking time, pH and reagent concentration was formulated using slope analysis and found to be M(BPHA)₃, where M=Pr(III), Ho(III) and Er(III). The effect of various masking agents shows that citrate, ascorbate, EDTA, oxalate, fluoride and phosphate form stable complexes with these rare earths as compared to BPHA. The decontamination factors for different cations with respect to these rare earths under the optimum conditions have been evaluated.     

One‐pot synthesis of 1‐ and 5‐substituted 1H‐tetrazoles using 1,4‐dihydroxyanthraquinone–copper(II) supported on superparamagnetic Fe3O4@SiO2 magnetic porous nanospheres as a recyclable catalyst

An effective one‐pot, convenient process for the synthesis of 1‐ and 5‐substituted 1H‐tetrazoles from nitriles and amines is described using1,4‐dihydroxyanthraquinone–copper(II) supported on Fe₃O₄@SiO₂ magnetic porous nanospheres as a novel recyclable catalyst. The application of this catalyst allows the synthesis of a variety of tetrazoles in good to excellent yields. The preparation of the magnetic nanocatalyst with core–shell structure is presented by using nano‐Fe₃O₄ as the core, tetraethoxysilane as the silica source and poly(vinyl alcohol) as the surfactant, and then Fe₃O₄@SiO₂ was coated with 1,4‐dihydroxyanthraquinone–copper(II) nanoparticles. The new catalyst was characterized using Fourier transform infrared spectroscopy, X‐ray diffraction, transmission electron microscopy, field emission scanning electron microscopy, dynamic light scattering, thermogravimetric analysis, vibration sample magnetometry, X‐ray photoelectron spectroscopy, nitrogen adsorption–desorption isotherm analysis and inductively coupled plasma analysis. This new procedure offers several advantages such as short reaction times, excellent yields, operational simplicity, practicability and applicability to various substrates and absence of any tedious workup or purification. In addition, the excellent catalytic performance, thermal stability and separation of the catalyst make it a good heterogeneous system and a useful alternative to other heterogeneous catalysts. Also, the catalyst could be magnetically separated and reused six times without significant loss of catalytic activity. Copyright © 2016 John Wiley & Sons, Ltd.     

Soap-free emulsion polymerization of poly (methyl methacrylate-co-butyl acrylate): effects of anionic comonomers and methanol on the different characteristics of the latexes

Soap-free emulsion polymerization (SFEP) of methyl methacrylate, butyl acrylate was conducted in water/methanol media with sodium salts of four different acidic comonomers, namely styrene sulfonic acid (NaSS), 2-acrylamide-2-methyl-1-propane sulfonic acid (NaAmps), acrylic acid (NaAA), and itaconic acid (Na₂ita). It was found that the introduction of methanol as co-solvent (35 wt%) to the medium greatly decreases the amount of water-soluble polyelectrolyte in the cases NaAA and Na₂ita while it does not make difference for NaSS and NaAmps. Having employed the concept of conductance dependency to the ion mobility, the onset concentration in which soluble chains were formed was detected. The addition of sulfonic-based comonomers (NaSS and NaAmps), first decreased particle size and then led to predomination of solution polymerization over SFEP. On the contrary, the incorporation of carboxylic-based comonomers (NaAA and Na₂ita) led to increase in particle size. Moreover, the particle size results were in good qualitative agreement with the classical Smith–Ewart theory.     

Solvent selection in ultrasonic-assisted emulsification microextraction: Comparison between high- and low-density solvents by means of novel type of extraction vessel

There are numerous published reports about dispersive liquid phase microextraction of the wide range of substances, however, till now no broadly accepted systematic and purpose oriented selection of extraction solvent has been proposed. Most works deal with the optimization of available solvents without adequate pre-consideration of properness. In this study, it is tried to compare the performances of low- and high-density solvents at the same conditions by means of novel type of extraction vessel with head and bottom conical shape. Extraction efficiencies of seven basic pharmaceutical compounds using eighteen common organic solvents were studied in this work. It was much easier to work with high-density solvents and they mostly showed better performances. This work shows that although exact predicting the performance of the solvents is multifaceted case but the pre-consideration of initial selection of solvents with attention to the physiochemical properties of the desired analytes is feasible and promising. Finally, the practicality of the method for extraction from urine and plasma samples was investigated.     

Minimum Norm Solution to the Absolute Value Equation in the Convex Case

In this paper, we give an algorithm to compute the minimum norm solution to the absolute value equation (AVE) in a special case. We show that this solution can be obtained from theorems of the alternative and a useful characterization of solution sets of convex quadratic programs. By using an exterior penalty method, this problem can be reduced to an unconstrained minimization problem with once differentiable convex objective function. Also, we propose a quasi-Newton method for solving unconstrained optimization problem. Computational results show that convergence to high accuracy often occurs in just a few iterations.     

A measure of dependence for stable distributions

A distance based measure of dependence is proposed for stable distributions that completely characterizes independence for a bivariate stable distribution. Properties of this measure are analyzed, and contrasted with the covariation and co-difference. A sample analog of the measure is defined and demonstrated on simulated and real data, including time series and distributions in the domain of attraction of a stable law.     

Nanosized cationic and anionic manganese porphyrins as mesoporous catalysts for the oxidation of olefins: Nano versus bulk aggregates

In this study, catalytic activity of bulk and nano‐sized meso‐tetrakis(4‐sulfonatophenyl)porphyrinatomanganese(III) acetate, MnTPPS₄(OAc), (ammonium salt) and meso‐tetrakis(3‐methylpyridyl)porphyrinatomanganese(III) acetate, MnT(3‐MePy)P(OAc) (tosylate salt) for the oxidation of olefins with tetra‐n‐butylammonium Oxone has been studied and compared with that of the bulk counterparts. The nanoparticles were prepared by mixing solvent techniques using water, (triethyleneglycol) monomethyl ether and dimethylsulfoxide or acetonitrile. The formation of nano‐sized catalysts was confirmed by UV‐Vis spectroscopy, DLS and AFM. Nitrogen porosimetry measurements indicated the homogeneous pore size distribution in the bulk and nano‐sized manganese porphyrins. In spite of the high oxidizability of Oxone, the heterogenized manganese porphyrins showed a significantly higher oxidative stability relative to their homogeneous counterparts within a reaction time of 6 h. The increase in the catalytic activity induced by the formation of nano‐sized catalysts was more pronounced in the case of MnT(3‐MePy)P(OAc). MnT(3‐MePy)P(OAc) may be recovered and reused for at least 4 times without any significant decrease in the catalyst efficiency. In the case of MnTPPS₄(OAc) a large decrease in the catalytic activity was observed after the first use of the catalyst. The latter was attributed to higher degrees of catalyst degradation in the case of MnTPPS₄(OAc).