Temperature dependent electrical conductivity of polyaniline/Y2O3 composites

Composites of polyaniline with yttrium oxide (Y₂O₃) nanoparticles have been prepared by chemical polymerizations method by increasing the weight percentage of yttrium oxide. X-Ray diffraction (XRD) and Fourier Transform Infrared Spectra (FTIR) were used to characterize the composites. XRD and FTIR pattern indicate that Polyaniline (PANI) is intercalated into the layers of Y₂O₃ nanoparticles successfully by in situ polymerization and therefore the degree of crystallinity increases due to crystalline of yttrium oxide nanoparticles. The scanning electron micrographs (SEM) also confirm the formation of dual phase of platelet as well as of flaky structure in PANI-Y₂O₃. Temperature dependant DC conductivity showed three dimensional variable ranges hopping (3D VRH) model. Activation energy, density of states and hopping length are calculated and found to be influenced by intercalating PANI into the layers of Y₂O₃ clay.     

Designing and Synthesis of Novel Amidated Fentanyl Analogs

Some new amidated fentanyl (=N‐[1‐(2‐phenylethyl)piperidin‐4‐yl]‐N‐phenylpropanamide) analogs with a 4‐(N‐phenylamido)piperidine scaffold and additional amide bonds have been designed and synthesized through Ugi four‐component reaction (Ugi‐4CR). Good‐to‐high yields, diversity‐oriented synthesis, and possible applications in drug discovery are advantages of this approach.     

A Simple,Convenient, and Efficient Synthetic Route for The Preparation of (Z)‐3,5‐Dichloro‐N‐(3‐(4‐substitutedphenyl)‐4‐phenylthiazole‐2(3H)‐ylide)benzamide Heterocyclic Compounds from Aroyl Thiourea Derivatives via S‐cyclization Mechanism

A series of variously substituted 1,3‐thiazole heterocyclic compounds ( 3a – 3d ) were prepared by base‐catalyzed S‐cyclization of corresponding 2,4‐dichloro‐N‐{[(4‐substitutedphenyl)amino]carbonothioyl}benzamide ( 2a – 2d ) with acetophenone in the presence of bromine. The structure of all compounds was established by IR, ¹H‐NMR, ¹³C‐NMR, elemental analysis, and X‐ray crystallographic analysis.     

K2CO3/H2O in [omim][BF4] Ionic Liquid: A Green Medium for Efficient Room‐Temperature Synthesis of N‐Substituted 1,4‐Benzoxazin‐3‐ones

A medium consisting of K₂CO₃ and H₂O in [omim][BF₄] ionic liquid (IL) was used to synthesize N‐substituted 2H‐benzo[b][1,4]oxazin‐3(4H)‐one derivatives from their corresponding o‐aminophenols and 2‐bromoalkanoates. As a result, chemoselective formation of benzoxazinones in high yields has been observed at room temperature. After the reactions and separation of the products, the IL was recovered and successfully reused in subsequent reactions without significant loss of activity.     

In Silico and Experimental Characterization of Chimeric Bacillus thermocatenulatus Lipase with the Complete Conserved Pentapeptide of Candida rugosa Lipase

Lipases are one of the highest value commercial enzymes as they have broad applications in detergent, food, pharmaceutical, and dairy industries. To provide chimeric Bacillus thermocatenulatus lipase (BTL2), the completely conserved pentapeptide (¹¹²Ala-His-Ser-Gln-Gly¹¹⁶) was replaced with similar sequences (²⁰⁷Gly-Glu-Ser-Ala-Gly²¹¹) of Candida rugosa lipase (CLR) at the nucleophilic elbow region. For this purpose, three mutations including A112G, H113E, and Q115A were inserted in the conserved pentapeptide sequence of btl2 gene. Based on the crystal structures of 2W22, the best structure of opened form of the chimeric lipases were garnered using the MODELLER v9.10 software. The native and chimeric lipases were docked to a set of ligands, and a trial version of Molegro Virtual Docker (MVD) software was used to obtain the energy values. Docking results confirmed chimeric lipase to be better than the native lipase. Following the in silico study, cloning experiments were conducted and expression of native and chimeric btl2 gene in Pichia pastoris was performed. The native and chimeric lipases were purified, and the effect of these mutations on characteristics of chimeric lipase studied and then compared with those of native lipase. Chimeric lipase exhibited 1.6-fold higher activity than the native lipase at 55 °C. The highest percentage of both lipases activity was observed at 60 °C and pH of 8.0. The ion Ca²⁺ slightly inhibited the activity of both lipases, whereas the organic solvent enhanced the lipase stability of chimeric lipase as compared with the native lipase. According to the results, the presence of two glycine residues at the conserved pentapeptide region of this chimeric lipase (¹¹² Gly-Glu-Ser-Ala-Gly ¹¹⁶) may increase the flexibility of the nucleophilic elbow region and affect the enzyme activity level.     

Thermodynamic study of complex formation process of free base meso-tetraphenylporphyrins with dimethyl and dibutyltin(IV) dichloride: a new algorithm for a single thermometric titration

A novel, fast and easy single sample measurement has been developed based upon temperature dependence of equilibrium constant in order to determine the enthalpy and entropy changes of a complexation reaction using spectrophotometric temperature titration. The method can be used in determination of the formation constant and thermodynamic parameters of the solutions that there are difficulties in their titration where volatile compounds are studying. Knowledge of component spectra is not required for the analysis. The formation constants of the interactions of ß-di and tri-brominated meso-tetraphenylporphyrins, and meso-tetrakis(4-methylphenyl) and (4-methoxyphenyl) porphyrins with Me₂SnCl₂ and Bu₂SnCl₂, have been determined in range of 0–25 °C utilizing van’t Hoff relation, mass balance and equilibrium constant equations by an iterative least squares method with ΔH ⁰ as adjustable parameter. The outputs of analysis are the equilibrium constants, ligand and adduct spectral profiles, their concentrations as a function of temperature, the adjusted values of the standard enthalpy ΔH ⁰, and entropy ΔS ⁰ changes. The order of formation constants of the resulting 1:1 complexes decreased with increasing number of bromide substituents and increased with adding methyl and methoxy groups, and vary as H₂T(4-CH₃O)PP > H₂T(4-CH₃)PP > H₂TPP > H₂TPPBr₂ > H₂TPPBr₃ and Me₂SnCl₂ > Bu₂SnCl₂.     

Modeling of iron adsorption on HTTA-loaded polyurethane foam using Freundlich,Langmuir and D-R isotherm expressions

The sorption of Fe(III) at low pH range from 1 to 4.5 on open cell polyether type HTTA-loaded polyurethane foam has been carried out using batch technique. The optimum shaking time for 2.5· 10^–4M solution of Fe(III) was found to be 30 minutes. The concept of macropore and micropore nature of polyurethane foam sorbent offers unique advantages of adsorption. Freundlich and Langmuir adsorption isotherms are followed at low concentration range from 1·10^–4 to 3·10^–4M solution of Fe(III). The Freundlich constant (1/n=0.46±0.013 andK=9.16±1.39 mg·g^–1) and Langmuir isotherm constants(M=21.78 mg·g^–1 andb=88.41±9.731·g^–1) were established. The sorption mean free energyE=12.22±0.09 kJ·mol^–1 and loading capacityC _m =145.21±6.1 mg·g^–1 were evaluated using Dubinin-Radushkevich isotherm, which suggested that the adsorption mechanism was chemisorption.     

Solvent extraction of trivalent lanthanide Pr(III), Ho(III) and Er(III) with N-benzoyl-N-phenylhydroxylamine

Extraction of Pr(III), Ho(III) and Er(III) has been studied in the pH range of 1–10 with N-benzoyl-N-phenylhydroxylamine (BPHA) in benzene. The separation was found to be quantitative in borate media from pH 7 to 10, at an ionic strength of 0.1M (H⁺, BO₃ ^3–). The stoichiometric composition of the complexes under the optimal conditions of shaking time, pH and reagent concentration was formulated using slope analysis and found to be M(BPHA)₃, where M=Pr(III), Ho(III) and Er(III). The effect of various masking agents shows that citrate, ascorbate, EDTA, oxalate, fluoride and phosphate form stable complexes with these rare earths as compared to BPHA. The decontamination factors for different cations with respect to these rare earths under the optimum conditions have been evaluated.     

Optimized ultrasound‐assisted extraction procedure for the analysis of opium alkaloids in papaver plants by cyclodextrin‐modified capillary electrophoresis

This study investigated the use of ultrasound‐assisted extraction to improve the extraction efficiency of morphine, codeine and thebaine from the papaver plants. Extraction conditions such as type of solvent, temperature, duration, frequency and power level of ultrasonic were optimized and the influences of different parameters on resolution of alkaloids in CE were studied. The optimized condition for CE separation includes a sodium phosphate buffer (100 mM, pH 3.0) containing 5 mM α‐CD. The optimized extraction conditions for ultrasound‐assisted extraction was an extraction time of 1 h, an ultrasonic frequency of 60 kHz with water–methanol (80:20) at 40°C as the extraction solvent. The LOD for alkaloids was found to be 0.1 μg/mL at a signal‐to‐noise ratio of 3:1. The RSDs for peak areas were in the range of 1.4–4.4%. The amounts of opium alkaloids (mg/100 g dried sample) in four Iranian papaver plants were found to be in the range of 7.8–8.7 (morphine), 5.5–9.5 (codeine) and 1.4–10.4 (thebaine). It should be emphasized that no cleanup of the filtered extract was required; hence, direct determination after extraction drastically simplifies the analytical process.     

A Novel and Efficient One‐Pot Synthesis of 2‐Aminopyrimidinones and Their Self‐Assembly

A three‐component reaction of benzaldehyde derivatives, methyl cyanoacetate, and guanidinium carbonate affords 2‐amino‐4‐aryl‐1,6‐dihydro‐6‐oxopyrimidine‐5‐carbonitriles and the four‐component reaction of benzaldehyde derivatives, methyl cyanoacetate, and guanidinium hydrochloride in the presence of piperidine leads to piperidinium salts of pyrimidinones. X‐ray crystallography data confirm self‐assembly and H‐bonding in these compounds.