Removal of Arsenic (III) from natural contaminated water using magnetic nanocomposite: kinetics and isotherm studies

The application of newly synthesized Fe₃O₄/TiO₂–SiO₂ that is modified with zinc (FTSZ) as a sorbent, for the removal of arsenic from contaminated water has been investigated in the present study. SEM, FTIR, XRD, BET, Zeta potential sizer (ξ) analyses are used to determine the sorbent characterization. The effect of the operational parameters such as initial pH, initial concentration, and the contact time were studied. In addition, the equilibrium behavior of FTSZ in As(III) removal was investigated in the temperature range of 20–40 °C. The results showed that the equilibrium data were fitted well with Langmuir than Freundlich isotherm model. The maximum monolayer adsorption capacity estimated by Langmuir isotherm was 24.010 mg g^?1. Thermodynamic parameters, ?H°, ?S° and ?G° were also calculated from graphical interpretation of the experimental data. Standard heats of sorption (?H°) were found to be endothermic and ?S° values were calculated to be positive for the sorption of As(III) onto the adsorbent.     

Correlation between rolling noise generation and rail roughness of tangent tracks and curves in time and frequency domains

Despite considerable advantages of the railway track over other means of transportation, noise pollution is the main adverse consequence of railway transportation. The basic cause of railway noise is rail corrugation. Although characteristics of railway noise have been considerably studied in the literature, rail corrugation effects on rolling noise generation in tangent tracks and the curves have not been sufficiently investigated. This research addresses the limitations of the current understanding of the rolling noise generation by investigating rail corrugation effects on rolling noise in tangent tracks and curves. This research was made based on the results obtained form a thorough field investigation carried out in a railway line which includes tangents tracks and sharp curves. A track geometry recording car was used to measure rail corrugations. For this purpose, an indirect method was developed in this research to obtain rail corrugation patterns from the data recorded by the track recording car. The effectiveness of the new method was shown. The induced noises were recorded using two particular types of microphones and implementing the method suggested by the ISO 3095 Standard. The rolling noise signal was distinguished from the total noise, using Butterworth Band-Pass Filtering. The role of rail corrugations in the rolling noise was discussed. Correlations were made between various types of corrugations and the induced noises. The results were presented and discussed in the spatial and frequency scales. Results obtained have led to new findings in rail corrugation effects on rolling noise generation. This research paves a way toward a better understanding of rolling noise sources and the parameters influencing the noise.     

Effective Potential in Noncommutative BTZ Black Hole

In this paper, we investigated the noncommutative rotating BTZ black hole and showed that such a space-time is not maximally symmetric. We calculated effective potential for the massive and the massless test particle by geodesic equations, also we showed effect of non-commutativity on the minimum mass of BTZ black hole.     

Efficient Oxidation of Hantzsch 1,4-Dihydropyridines with Nicotinium Dichromate

A convenient method for the oxidation of various 4-substituted Hantzsch 1,4-dihydropyridines with nicotinium dichromate (NDC) in refluxing acetonitrile is reported. The yields obtained are excellent.     

A novel biocompatible drug carrier for oral delivery and controlled release of antibiotic drug: loading and release of clarithromycin as an antibiotic drug model

In this work, a novel biocompatible carrier was designed by modification of nanoporous carbon material and synthesized by hydrothermal condensation of d-Fructose, as the carbon source, in the presence of Pluronic^® F127, as the surfactant. The prepared material is completely biocompatible and suitable for oral drug delivery. As this nanoporous carbon has surface decorated hydroxyl groups, they are able to react with 3-aminopropyltriethoxysilane agent and produce amino-functionalized nanoporous carbon. The synthesis of amine-modified carbon nanoporous material was confirmed by X-ray powder diffraction, IR spectroscopy, elemental analysis, thermal analysis and nitrogen adsorption analysis. Clarithromycin as an active drug molecule with carbonyl and hydroxyl functional groups in chemical structure was chosen as the drug model and stored in pores of the amine-modified nanoporous carbon. Release of clarithromycin from modified nanoporous carbon was investigated in mouth and stomach pH values. The results showed that this drug carrier can transfer the drug up to stomach without any leak or release. The release time was investigated, and the results showed that the carrier is also successful for the controlled-release delivery.     

Dehydration characteristics and mathematical modelling of lemon slices drying undergoing oven treatment

In this study, the effect of drying temperature on drying behaviour and mass transfer parameters of lemon slices was investigated. The drying experiments were conducted in a laboratory air ventilated oven dryer at temperatures of 50, 60 and 75 °C. It was observed that the drying temperature affected the drying time and drying rate significantly. Drying rate curves revealed that the process at the temperature levels taken place in the falling rate period entirely. The usefulness of eight thin layer models to simulate the drying kinetics was evaluated and the Midilli and Kucuk model showed the best fit to experimental drying curves. The effective moisture diffusivity was determined on the basis of Fick’s second law and obtained to be 1.62 × 10^?11, 3.25 × 10^?11 and 8.11 × 10^?11 m² s^?1 for the temperatures of 50, 60 and 75 °C, respectively. The activation energy and Arrhenius constant were calculated to be 60.08 kJ mol^?1 and 0.08511 m² s^?1, respectively. The average value of convective mass transfer coefficient for the drying temperatures of 50, 60 and 75 °C was calculated to be 5.71 × 10^?7, 1.62 × 10^?6 and 2.53 × 10^?6 m s^?1, respectively.     

A novel microextraction technique based on 1-hexylpyridinium hexafluorophosphate ionic liquid for the preconcentration of zinc in water and milk samples

A simple dispersive liquid-liquid microextraction methodology based on the application of 1-hexylpyridinium hexafluorophosphate [HPy][PF₆] ionic liquid (IL) as an extractant solvent was proposed for the preconcentration of trace levels of zinc as a prior step to determination by flame atomic absorption spectrometry (FAAS). Zinc was complexed with 8-hydroxyquinoline (oxine) and extracted into ionic liquid. Some effective factors that influence the microextraction efficiency such as pH, oxine concentration, amount of IL, ionic strength, temperature and centrifugation time were investigated and optimized. In the optimum experimental conditions, the limit of detection (3 s) and the enhancement factor were 0.22 μg L⁻¹ and 71, respectively. The relative standard deviation (RSD) for six replicate determinations of 13 μg L⁻¹ Zn was 1.92%. In order to validate the developed method, a certified reference material (NIST SRM 1549) was analyzed and the determined values were in good agreement with the certified values. The proposed method was successfully applied to the trace determination of zinc in water and milk samples.     

Unusual Length Dependence of the Conductance in Cumulene Molecular Wires

Cumulenes are sometimes described as “metallic” because an infinitely long cumulene would have the band structure of a metal. Herein, we report the single‐molecule conductance of a series of cumulenes and cumulene analogues, where the number of consecutive C=C bonds in the core is n=1, 2, 3, and 5. The [n]cumulenes with n=3 and 5 have almost the same conductance, and they are both more conductive than the alkene (n=1). This is remarkable because molecular conductance normally falls exponentially with length. The conductance of the allene (n=2) is much lower, because of its twisted geometry. Computational simulations predict a similar trend to the experimental results and indicate that the low conductance of the allene is a general feature of [n]cumulenes where n is even. The lack of length dependence in the conductance of [3] and [5]cumulenes is attributed to the strong decrease in the HOMO–LUMO gap with increasing length.     

Performance analysis and multi-objective optimization of an organic Rankine cycle with binary zeotropic working fluid employing modified artificial bee colony algorithm

From a thermal point of view, zeotropic mixtures are likely to be more efficient than azeotropic fluids in low-temperature power cycles for reduction in exergy destruction occurring during heat absorption/rejection processes due to their suitable boiling characteristics. In this study, comprehensive energetic and exergetic analyses are mathematically performed for an organic Rankine cycle (ORC) system employing a potential binary zeotropic working fluid, namely R717/water. For this purpose, initially mass, energy, and exergy balance equations are derived. With regard to the similarity in molar mass of R717 (17.03 g mol^?1) and water (18.01 g mol^?1), there is no need to alter the size of the ORC components such as turbine and pump. In order to achieve the optimal thermal and exergy efficiencies of the ORC system, modified version a powerful and relatively new optimization algorithm called artificial bee colony (ABC) is used taking into account different effective constraints. The main motivation behind using ABC lies on its robustness, reliability, and convergence rate speed in dealing with complicated constrained multi-objective problems. Convergence rates of the algorithm for optimal calculation of the efficiencies are presented. Subsequently, due to the importance of exergy concept in ORC systems, exergy destructions occurring in the components are computed. Finally, the impacts of pressure, temperature, mass fraction, and mass flow rate on the ORC thermal and exergy efficiencies are discussed.