Spectroscopic studies on the effect of temperature on pH-induced folded states of human serum albumin

Human serum albumin (HSA) is a very important multi-domain transporter protein in the circulatory system responsible for carriage of various kinds of ligands within the physiological system. HSA is also known to undergo conformational transformation at different pH(s) and temperatures. In this report we have studied the binding interactions of a photosensitizing drug, protoporphyrin IX (PPIX) with various conformers of HSA at different temperatures using picosecond time-resolved fluorescence spectroscopy. Also, using dynamic light scattering (DLS) and circular dichroism (CD) spectroscopy we have followed the structural transition of various conformers of HSA at different temperatures. Ensuring the intact binding of PPIX to various conformers of HSA at different temperatures as revealed through time-resolved fluorescence anisotropy decay and significant spectral overlap of emission of Trp214 residue (donor) in domain-IIA and absorption of PPIX (acceptor) bound to domain-IB of HSA, we have applied F?rster's resonance energy transfer (FRET) technique to determine the interdomain separation under various environmental conditions. The alkali-induced conformer of HSA shows almost no change in donor-acceptor distance in contrast to the native and acid-induced conformers of HSA, which show a decrease in distance with increase in temperature. Through this study the non-covalently bound PPIX is shown to be an efficient FRET probe in reporting the different temperature-induced folded states of HSA in buffer solutions of widely differing pH values.     

LC–MS Simultaneous Determination of Itopride Hydrochloride and Domperidone in Human Plasma

A rapid, simple, sensitive and specific liquid chromatography–tandem mass spectrometry method was developed and validated for simultaneous quantification of itopride hydrochloride and domperidone in human plasma. Both drugs were extracted by liquid–liquid extraction with ethyl acetate and saturated borax solution. The chromatographic separation was performed on a reversed-phase C18 column with a mobile phase of water–methanol (2:98, v/v) containing 0.5% formic acid. The protonated analyte was quantitated in positive ionization by multiple reaction monitoring with a mass spectrometer. The assay exhibited linearity over the concentration range of 3.33–500 ng mL^?1 for itopride hydrochloride and 3.33–100 ng mL^?1 for domperidone in human plasma. The precursor to product ion transitions of m/z 359.1–72.3 and 426.0–147.2 were used to measure itopride hydrochloride and domperidone respectively. The method was found suitable for the analysis of plasma samples collected during phase 1 pharmacokinetics study of itopride HCl 50 mg and domperidone 20 mg in 12 healthy volunteers after single oral doses of the combination drug.     

Dioxomolybdenum(VI) and dioxotungsten(VI) complexes supported by an amido ligand

Stepwise addition of one equivalent of n-butyllithium and trimethylsilyl chloride to 2-tert-butylmercaptoaniline affords the new ligand 1-(Me3SiNH)-2-(t-BuS)C6H4 (LH), that reacts with one equivalent of butyllithium to its lithium salt LLi. Dioxodichloromolybdenum [MoO2Cl2] and dioxodichlorotungsten dimethoxyethane [WO2Cl2(dme)] react in tetrahydrofuran solution at low temperature with two equivalents LLi to monomeric dioxomolybdenum(VI) [MoO2L2] (1) and dioxotungsten(VI) complex [WO2L2] (2) employing two bidentate amido thioether ligands. The crystallographic determination of the molecular structures of 1 and 2 show evidence for M...S contacts. The reaction of [MoO2Cl2] with LLi in tetrahydrofuran solution at room temperature leads next to 1 to two compounds where silyl group migration from nitrogen to oxygen atoms occurs forming [Mo(=NL')2(OSiMe)2] (3) and [Mo(=NL')2(OSiMe3)L] (4, L' = N-2-t-BuSC6H4) as determined by NMR spectroscopy. Compound 4 was isolated in low yield and its molecular structure determined by X-ray crystallography. Higher yields of a bisimido complex can be obtained by the direct reaction of one equivalent of LLi with [Mo(NAr)2Cl2(dme)] (Ar = 2,6-Me2C6H4) forming [Mo(NAr)2LCl] (5).     

The unambiguous synthesis and NMR assignment of 4-alkoxy and 3-alkylquinazolines

Contrary to a number of reports, alkylations of the privileged 3,4-dihydroquinazoline scaffold provide N3-alkylated products, and not 4-alkoxyquinazolines. To correctly assign the structure, ¹³C NMR shifts of the –Z–CH_n– (Z=O, N) fragment are necessary; resonances in the 45–55 ppm range are indicative of N3-alkylation. Treatment of 3,4-dihydroquinazoline-4-one with p-TsCl afforded the N3-tosylated compound, whose reaction with an amine yielded the corresponding N3-alkyl derivative. A mechanism corroborated by ¹⁵N-labeling involving pyrimidine ring opening and recyclisation is proposed. Finally, the unambiguous preparation of 4-alkoxyquinazolines is described via treatment of 3,4-dihydroquinazoline-4-ones with PCl₅ followed by an alkoxide.     

Solvent effects on the rate of thermolysis of lauroyl peroxide

Thermolysis of lauroyl peroxide in various organic solvents was studied. It was shown that the primary homolytic dissociation of the peroxide group is accompanied by secondary reactions of chain-induced decomposition. The reaction medium affects the rate of both the primary homolytic dissociation and secondary induced decomposition processes. Correlation equations between the rate constants of the reactions in study and the physicochemical parameters of the solvents were proposed.     

Fisetin Inhibits UVB‐induced Cutaneous Inflammation and Activation of PI3K/AKT/NFκB Signaling Pathways in SKH‐1 Hairless Mice

Solar ultraviolet B (UVB) radiation has been shown to induce inflammation, DNA damage, p53 mutations and alterations in signaling pathways eventually leading to skin cancer. In this study, we investigated whether fisetin reduces inflammatory responses and modulates PI3K/AKT/NFκB cell survival signaling pathways in UVB‐exposed SKH‐1 hairless mouse skin. Mice were exposed to 180 mJ cm^?2 of UVB radiation on alternate days for a total of seven exposures, and fisetin (250 and 500 nmol) was applied topically after 15 min of each UVB exposure. Fisetin treatment to UVB‐exposed mice resulted in decreased hyperplasia and reduced infiltration of inflammatory cells. Fisetin treatment also reduced inflammatory mediators such as COX‐2, PGE₂ as well as its receptors (EP1–EP4) and MPO activity. Furthermore, fisetin reduced the level of inflammatory cytokines TNFα, IL‐1β and IL‐6 in UVB‐exposed skin. Fisetin treatment also reduced cell proliferation markers as well as DNA damage as evidenced by increased expression of p53 and p21 proteins. Further studies revealed that fisetin inhibited UVB‐induced expression of PI3K, phosphorylation of AKT and activation of the NFκB signaling pathway in mouse skin. Overall, these data suggest that fisetin may be useful against UVB‐induced cutaneous inflammation and DNA damage.     

Development and validation of an LC-ESI-MS/MS method for simultaneous quantitation of olmesartan and pioglitazone in rat plasma and its pharmacokinetic application

A simple, high‐throughput and specific high‐performance liquid chromatography tandem mass spectrometry method has been developed and validated according to the FDA guidelines for simultaneous quantification of olmesartan and pioglitazone in rat plasma. The bioanalytical method consists of liquid–liquid extraction and quantitation by triple quadrupole mass spectrometry using electrospray ionization technique, operating in multiple reaction monitoring and positive ion modes. The compounds were eluted isocratically on a C₁₈ column with a mobile phase consisting of a mixture of methanol and water (containing 0.5% formic acid) in a ratio of 9:1. The response to olmesartan and pioglitazone was linear over the range 0.01–10 µg/mL. The validation results demonstrated that the method had satisfactory precision and accuracy across the calibration range. Intra‐ and inter‐day precisions ranged from 0.66 to 3.32 and from 0.94 to 2.93% (%CV), respectively. The accuracy determined at three quality control levels was within 91.27–107.28%. There was no evidence of instability of the analytes in rat plasma following the stability studies. The method proved highly reproducible and sensitive and was successfully applied in a pharmacokinetic study after single dose oral administration of olmesartan and pioglitazone to the rat. Copyright © 2010 John Wiley & Sons, Ltd.     

Synthesis of multifunctional metal- and metal oxide core@mesoporous silica shell structures by using a wet chemical approach

We demonstrate a facile wet chemical approach for fabricating spherical metal/metal-oxide core@mesoporous silica shell hybrid nanoparticles with different core and shell thicknesses. Vertically aligned mesoporous silica (mSiO(2) ) shells were fabricated over the pre-synthesized spherical SiO(2) nanoparticles through a three-step strategy: 1)?synthesis of core materials, 2)?covering the core with an organic-inorganic composite layer, and 3)?removing the organic template through calcinations in air. The mechanisms of hybrid structure formation are proposed. The multifunctional nature of the hybrid structures could be induced by incorporating guest ions/molecules, such as Ag, Mn, and TiO(2) , into the pores of an mSiO(2) shell. Mn and TiO(2) cluster- incorporated composite structures have been tested to be antioxidizing agents and effective photocatalysts through electron spin resonance, radical scavenging tests, and the photocatalytic degradation of rhodamine B. The possibility of incorporating several hetero-element guest clusters in these mesoporous composite particles makes them highly attractive for multifunctional applications.     

Interlocked catenane-like structure predicted in Au24(SR)20: implication to structural evolution of thiolated gold clusters from homoleptic gold(I) thiolates to core-stacked nanoparticles

Atomic structure of a recently synthesized ligand-covered cluster Au(24)(SR)(20) [J. Phys. Chem. Lett., 2010, 1, 1003] is resolved based on the developed classical force-field based divide-and-protect approach. The computed UV-vis absorption spectrum and powder X-ray diffraction (XRD) curve for the lowest-energy isomer are in good agreement with experimental measurements. Unique catenane-like staple motifs are predicted for the first time in core-stacked thiolate-group (RS-) covered gold nanoparticles (RS-AuNPs), suggesting the onset of structural transformation in RS-AuNPs at relatively low Au/SR ratio. Since the lowest-energy structure of Au(24)(SR)(20) entails interlocked Au(5)(SR)(4) and Au(7)(SR)(6) oligomers, it supports a recently proposed growth model of RS-AuNPs [J. Phys. Chem. Lett., 2011, 2, 990], that is, Au(n)(SR)(n-1) oligomers are formed during the initial growth of RS-AuNPs. By comparing the Au-core structure of Au(24)(SR)(20) with other structurally resolved RS-AuNPs, we conclude that the tetrahedral Au(4) motif is a prevalent structural unit for small-sized RS-AuNPs with relatively low Au/SR ratio. The structural prediction of Au(24)(SR)(20) offers additional insights into the structural evolution of thiolated gold clusters from homoleptic gold(I) thiolate to core-stacked RS-AuNPs. Specifically, with the increase of interfacial bond length of Au(core)-S in RS-AuNPs, increasingly larger "metallic" Au-core is formed, which results in smaller HOMO-LUMO (or optical) gap. Calculations of electronic structures and UV-vis absorption spectra of Au(24)(SR)(20) and larger RS-AuNPs (up to ~2 nm in size) show that the ligand layer can strongly affect optical absorption behavior of RS-AuNPs.     

Intriguing H-aggregate and H-dimer formation of coumarin-481 dye in aqueous solution as evidenced from photophysical studies

Photophysical properties of coumarin-481 (C481) dye in aqueous solution show intriguing presence of multiple emitting species. Concentration and wavelength dependent fluorescence decays and time-resolved emission spectra and area-normalized emission spectra suggest the coexistence of dye monomers, dimers, and higher aggregates (mostly trimers) in the solution. Because of the efficient intramolecular charge transfer (ICT) state to twisted intramolecular charge transfer (TICT) state conversion, the dye monomers show very short fluorescence lifetime of ~0.2 ns. Fluorescence lifetimes of dimers (~4.1 ns) and higher aggregates (~1.4 ns) are relatively longer due to steric constrain toward ICT to TICT conversion. Observed results indicate that the emission spectra of the aggregates are substantially blue-shifted compared to monomers, suggesting H-aggregation of the dye in the solution. Temperature-dependent fluorescence decays in water and time-resolved fluorescence results in water-acetonitrile solvent mixtures are also in support of the dye aggregation in the solution. Though dynamic light scattering studies could not recognize the dye aggregates in the solution due to their small size and low concentration, fluorescence up-conversion measurements show a relatively higher decay tail in water than in water-acetonitrile solvent mixture, in agreement with higher dye aggregation in aqueous solution. Time-resolved fluorescence results with structurally related non-TICT dyes, especially those of coumarin-153 dye, are also in accordance with the aggregation behavior of these dyes in aqueous solution. To the best of our knowledge, this is the first report on the aggregation of coumarin dyes in aqueous solution. Present results are important because coumarin dyes are widely used as fluorescent probes in various microheterogeneous systems where water is always a solvent component, and the dye aggregation in these systems, if overlooked, can easily lead to a misinterpretation of the observed results.