Chelation of cadmium ions by phytochelatin synthase: role of the cysteine-rich C-terminal.

The interactions between Cd(2+) and the C-terminal region of phytochelatin (PC) synthase using recombinant wild-type and mutant PC synthase were studied. We show that site-directed mutagenesis of Cys residues at C(358)C(359)XXXC(363)XXC(366) motif decreases the number of Cd(2+) and other heavy metal ions interacting with the enzyme, and that the motif binds the metals discriminatingly. The optimum binding ratio of PC synthase to Cd(2+) was also determined. The findings indicate that Cys exists as a free SH residue and that it is involved in the regulation of PC enzyme activity by transferring the metals into closer proximity with the catalytic domain. These results are important in understanding heavy metal detoxification mechanisms in higher plants, a step towards phytoremediated-applications.     

One-pot stereospecific construction of cis-clerodane skeleton by means of doubly stereocontrolled cyclization: Total synthesis of linaridial

Doubly stereocontrolled cyclization of the allylsilane derivative 1 followed by trapping of the enolate with ClCH₂SMe gives in one-pot manner the decalone derivatve 5 in which all of the four contiguous diastereomeric centers of -clerodane skeleton have been secured. The total synthesis of linaridial 4 have been accomplished from 5.     

Influence of wall heat loss on the emission characteristics of premixed ammonia-air swirling flames interacting with the combustor wall

The influence of wall heat loss on the emission characteristics of ammonia-air swirling flames has been investigated employing Planar Laser-Induced Fluorescence imaging of OH radicals and Fourier Transform Infrared spectrometry of the exhaust gases in combustors with insulated and uninsulated walls over a range of equivalence ratios, ?, and pressures up to 0.5 MPa. Strong influence of wall heat loss on the flames led to quenching of the flame front near the combustor wall at 0.1 MPa, resulting in large unburned NH₃ emissions, and inhibited the stabilization of flames in the outer recirculating zone (ORZ). A decrease in heat loss effects with an increase in pressure promoted extension of the fuel-rich stabilization limit owing to increased recirculation of H₂ from NH₃ decomposition in the ORZ. The influence of wall heat loss resulted in emission trends that contradict already reported trends in literature. NO emissions were found to be substantially low while unburned NH₃ and N₂O emissions were high at fuel-lean conditions during single-stage combustion, with values such as 55 ppmv of NO, 580 ppmv of N₂O and 4457 ppmv of NH₃ at ? = 0.8. In addition, the response of the flame to wall heat loss as pressure increased was more important than the effects of pressure on fuel-NO emission, thereby leading to an increase in NO emission with pressure. It was found that a reduction in wall heat loss or a sufficiently long fluid residence time in the primary combustion zone is necessary for efficient control of NH₃ and N₂O emissions in two-stage rich-lean ammonia combustors, the latter being more effective for N₂O in addition to NO control. This study demonstrates that the influence of wall heat loss should not be ignored in emissions measurements in NH₃-air combustion, and also advances the understanding of previous studies on ammonia micro gas turbines.     

Studies on the effects of imidazole on the peroxyoxalate chemiluminescence detection system for high performance liquid chromatography

The catalytic effect of bases (imidazole, pyridine, Tris and triethylamine) on the peroxyoxalate chemiluminescence (PO-CL) reaction for high performance liquid chromatography (HPLC) was investigated. Imidazole increased PO-CL intensity extraordinarily, whereas the other bases (pyridine, Tris and triethylamine) did not. The peak heights of dipyridamole (coronary vasodilator) obtained using the eluents containing buffers were largest at pH 7.0, a few times less at pH 6.0 and pH 5.0, 100 times less at pH 4.0 and a few hundred times less at pH 3.0. The eluents containing buffers at pH 3, 4, 5, 6 or 7 each with imidazole increased the peak heights by a few to ten times as compared with those without imidazole, and those peak heights were within one order of magnitude. On the other hand, the eluent containing buffer at pH 2 did not affect the peak heights with or without imidazole. Bis(4-nitro-2-(3,6,9-trioxadecyloxycarbonyl)phenyl) oxalate (TDPO) alone and bis(2,4-dinitrophenyl)oxalate (DNPO) plus TDPO were recommended to be used against eluents containing buffers of pH 5-7 and pH 3-4, respectively. Dipyridamole and benzydamine hydrochloride (anti-inflammatory drug) were separated on the ODS column and detected by the present system. The detection limits of dipyridamole and benzydamine hydrochloride were 40 amol and 270 fmol, respectively.     

Sensitive detection of oxo-steroids and oxo-bile acids by liquid chromatography with peroxyoxalate chemiluminescence detection

Oxo-steroids and oxo-bile acid ethyl esters were derivatized with 5-N,N-dimethylamino-naphthalene-1-sulphonohydrazide (DNS-hydrazine) to DNS-hydrazone in the presence of hydrochloric acid in ethanol or trifluoroacetic acid in benzene, purified by high-performance gel-permeation chromatography, separated on an ODS column with an eluent containing tetrahydrofuran and detected via a peroxyoxalate chemiluminescence reaction using bis[4-nitro-2-(3,6,9-trioxadecyloxycarbonyl)phenyl] oxalate (TDPO). Sensitive detection (femtomole level) of each oxo-steroid which appeared as a single peak was achieved. The procedure for the isolation of oxo-bile acids developed for GC-MS allowed the detection by this system of an unusual oxo-bile acid, 7α-hydroxy-3-oxo-5β-cholanic acid, at the nanomole l^?1 level in urine from a patient with cholestatic liver disease.     

Development of ion transportation, extraction and neutralization systems for atomic beam resonance method

A device that produces a low-energy and largely spin polarized RI beam based on the atomic beam resonance method (RIABR) has been developed. We have performed measurements of stopping and drifting an incoming RI ion beam in a gas chamber, extraction of the ions into a vacuum region, and neutralization of the extracted low-energy ion beam. The drift efficiency of RI ions in a gas and the extraction efficiency at a Laval-type glass nozzle were found to be 0.72±0.04 and 0.033, respectively. The result of the experiment for the neutralization is also discussed.     

Hartree–Fock and density functional theory calculations for the reaction mechanism of nitric oxide reductase cytochrome P450nor from Fusarium oxysporum

A reaction mechanism of a nitric oxide reductase, cytochrome P450nor (P450nor) from Fusarium oxysporum, was clarified by using Density functional theory and Hartree–Fock calculations. In this reaction mechanism, molecular orbital (MO) analysis revealed that the NO ligand dissociates from the heme iron immediately after one-electron reduction by NADH, and MO energy analysis revealed that NADH acts as a one-electron reducer, not as a two-electron reducer, and that NADH has a pivotal role different from other one-electron reducers. The role of NADH is to act as a double one-electron donor (i.e. one-electron transfer occurring twice) and to combine with the NO⁻ molecule by charge recombination reaction. Our quantum chemical calculations indicated that all reactions occurring in the heme pocket are too fast to become rate-limiting. Therefore, the rate-limiting steps in the proposed reaction mechanism are the process of capturing NO and NADH into the heme pocket and the process of expelling a product generated in the heme pocket. Kinetics of these processes was discussed based on large-amplitude vibration, which helps capturing and expelling processes in a widely opened heme pocket of P450nor. The reaction mechanism proposed here well explains published experimental data.     

Cage-shaped borate esters with tris(2-oxyphenyl)methane or -silane system frameworks bearing multiple tuning factors: geometric and substituent effects on their Lewis acid properties

Boron complexes that contain new tridentate ligands, tris(o‐oxyaryl)methanes and ‐silanes, were prepared. These complexes had a cage‐shaped structure around a boron center and showed higher Lewis acidity and catalytic activity than open‐shaped boron compounds. The cage‐shaped ligands determined the properties of the borates by altering the geometry and were consistently bound to the metal center by chelation. The synthesized compounds were L?B(OC₆H₄)₃CH, L?B(OC₆H₄)₃SiMe, and its derivatives (L=THF or pyridine as an external ligand). Theoretical calculations suggested that the cage‐shaped borates had a large dihedral angle (C_ipso‐O‐B‐O) compared with open‐shaped borates. The geometric effect due to the dihedral angle means that compared with open‐shaped, the cage‐shaped borates have a greater Lewis acidity. The introduction of electron‐withdrawing groups on the aryl moieties in the cage‐shaped framework increased the Lewis acidity. Substitution of a bridgehead Si for a bridgehead C decreased the Lewis acidity of the boron complexes because the large silicon atom reduces the dihedral angle of C_ipso‐O‐B‐O. The ligand‐exchange rates of the para‐fluoro‐substituted compound B(OC₆H₃F)₃CH and the ortho‐phenyl‐substituted compound B(OC₆H₃Ph)₃CH were less than that of the unsubstituted borate B(OC₆H₄)₃CH. The ligand‐exchange rate of B(OC₆H₄)₃SiMe was much faster than that of B(OC₆H₄)₃CH. A hetero Diels–Alder reaction and Mukaiyama‐type aldol reactions were more effectively catalyzed by cage‐shaped borates than by the open‐shaped borate B(OPh)₃ or by the strong Lewis acid BF₃?OEt₂. The cage‐shaped borates with the bulky substituents at the ortho‐positions selectively catalyzed the reaction with less sterically hindered substrates, while the unsubstituted borate showed no selectivity.     

Selective photocatalytic oxidation of alcohols to aldehydes in water by TiO2 partially coated with WO3

Semiconductor TiO₂ particles loaded with WO₃ (WO₃/TiO₂), synthesized by impregnation of tungstic acid followed by calcination, were used for photocatalytic oxidation of alcohols in water with molecular oxygen under irradiation at λ>350 nm. The WO₃/TiO₂ catalysts promote selective oxidation of alcohols to aldehydes and show higher catalytic activity than pure TiO₂. In particular, a catalyst loading 7.6 wt % WO₃ led to higher aldehyde selectivity than previously reported photocatalytic systems. The high aldehyde selectivity arises because subsequent photocatalytic decomposition of the formed aldehyde is suppressed on the catalyst. The TiO₂ surface of the catalyst, which is active for oxidation, is partially coated by the WO₃ layer, which leads to a decrease in the amount of formed aldehyde adsorbed on the TiO₂ surface. This suppresses subsequent decomposition of the aldehyde on the TiO₂ surface and results in high aldehyde selectivity. The WO₃/TiO₂ catalyst can selectively oxidize various aromatic alcohols and is reusable without loss of catalytic activity or selectivity.