Cis-Trans Isomerization and Oxidation of Radical Cations of Stilbene Derivatives

Isomerization from cis stilbene derivatives (c-S (S = RCH=CHC(6)H(5): 1, R = C(6)H(5); 2, R = 4-CH(3)C(6)H(4); 3, R = 4-CH(3)OC(6)H(4) (= An); 4, R = 2,4-(CH(3)O)(2)C(6)H(3); 5, R = 3,4-(CH(3)O)(2)C(6)H(3); 6, R = 3,5-(CH(3)O)(2)C(6)H(3); 7, AnCH=C(CH(3))C(6)H(5); 8, AnCH=CHAn)) to trans isomers (t-S) and oxidation of S with O(2) were studied in gamma-ray radiolyses of c-S in Ar-saturated 1,2-dichloroethane (DCE) and of S in O(2)-saturated DCE, respectively. On the basis of product analyses, it is suggested that a smaller barrier to c-t unimolecular isomerization for c-3(*+)-5(*+) and 8(*+) than for c-1(*+), 2(*+), and 6(*+) due to the single bond character of the central C=C double bond for c-3(*+)-5(*+) and 8(*+) with a p-methoxyl group but not for c-1(*+), 2(*+), and 6(*+) without a p-methoxyl group because of the contribution of a quinoid-type structure induced by charge-spin separation. The isomerization proceeds via chain reaction mechanisms involving c-t unimolecular isomerization and endergonic hole transfer or dimerization and decomposition. The isomerization of c-3(*+) to t-3(*+) is catalyzed by addition of 1,4-dimethoxybenzene but terminated by triethylamine. The regioselective formation of 3d in oxidation of 3(*+) with O(2) is explained by spin localization on the beta-olefinic carbon in 3(*+). The results of product analyses are compared with the rate constants of the unimolecular isomerization and the oxidation for S(*+) measured with pulse radiolyses.     

Novel stereoconvergent transformation of 1,2a-disubstituted 1,2,2a,8b-tetrahydro-3H-benzo[b]cyclobuta[d]pyran-3-ones to 1,3-disubstituted 1,2,4a,9b-tetrahydrodibenzofuran-4-ols and its application to the second-generation synthesis of (+/-)-linderol A

1,2a-Disubstituted 1,2,2a,8b-tetrahydro-3H-benzo[b]cyclobuta[d]pyran-3-ones bearing an electron-withdrawing group at the 2a-position were treated with two equivalents of dimethylsulfoxonium methylide to give r-1,t-4a,t-9b-1,3-disubstituted 1,2,4a,9b-tetrahydrodibenzofuran-4-ols stereoconvergently regardless of the stereochemistry of the 1-position on the benzocyclobutapyran ring. This methodology was applied to the second-generation synthesis of (+/-)-linderol A, a melanin biosynthesis inhibitory natural product.     

Medicinal flowers. XXII. Structures of chakasaponins V and VI, chakanoside I, and chakaflavonoside A from flower buds of Chinese tea plant (Camellia sinensis)

Two acylated oleanane-type triterpene oligoglycosides, chakasaponins V and VI, an aromatic glycoside, chakanoside I, and an acylated flavonol oligoglycoside, chakaflavonoside A, were isolated from the flower buds of Chinese tea plant [Camellia sinensis (L.) O. KUNTZE]. The chemical structures of those new glycosides were elucidated on the basis of chemical and physicochemical evidence.     

Structure-activity relationships of estrogen derivatives as aromatase inhibitors. Effects of heterocyclic substituents

Aromatase, which is responsible for the conversion of androgens to estrogens, is a potential therapeutic target for the selective lowering estrogen level in patients with estrogen-dependent breast cancer. We prepared and tested series of the pyridine- and other heterocyclic ring-containing derivatives of 2- and 4-aminoestrones, estrone, and estradiol, compounds 5, 10, 12 and 15. The isonicotinyl derivatives of 2- and 4-aminoestrone, compounds 5c and 10c, were fairly potent competitive inhibitors of aromatase (K(i), 2.1+/-0.14 and 1.53+/-0.08 microM for 5c and 10c, respectively) and other compounds did not show, to a significant extent, the aromatase inhibitory activity. This result suggests that the isonicotinyl-substituted derivatives 5c and 10c would be accessible to the active site of aromatase.     

Synthesis of a Ni Complex Chelated by a [2.2]Paracyclophane-Functionalized Diimine Ligand and Its Catalytic Activity for Olefin Oligomerization

A diimine ligand having two [2.2]paracyclophanyl substituents at the N atoms (L1) was prepared from the reaction of amino[2.2]paracyclophane with acenaphtenequinone. The ligand reacts with NiBr₂(dme) (dme: 1,2-dimethoxyethane) to form the dibromonickel complex with (R,R) and (S,S) configuration, NiBr₂(L1). The structure of the complex was confirmed by X-ray crystallography. NiBr₂(L1) catalyzes oligomerization of ethylene in the presence of methylaluminoxane (MAO) co-catalyst at 10–50 °C to form a mixture of 1- and 2-butenes after 3 h. The reactions for 6 h and 8 h at 25 °C causes further increase of 2-butene formed via isomerization of 1-butene and formation of hexenes. Reaction of 1-hexene catalyzed by NiBr₂(L1)–MAO produces 2-hexene via isomerization and C12 and C18 hydrocarbons via oligomerization. Consumption of 1-hexene of the reaction obeys first-order kinetics. The kinetic parameters were obtained to be ΔG^‡ = 93.6 kJ mol⁻¹, ΔH^‡ = 63.0 kJ mol⁻¹, and ΔS^‡ = −112 J mol⁻¹deg⁻¹. NiBr₂(L1) catalyzes co-dimerization of ethylene and 1-hexene to form C8 hydrocarbons with higher rate and selectivity than the tetramerization of ethylene.     

Particle size effect on the new phase transition in a tridymite compound, CsCoPO4

A new phase transition (III–IV) was found at 311 K in CsCoPO₄ by DSC measurements. The crystal structure of all the phases, I–IV, in CsCoPO₄ was studied by synchrotron-radiation X-ray powder diffraction. The diffractometry revealed that CsCoPO₄ had the same crystal structure as that of corresponding phases in CsZnPO₄. An extremely large particle size effect was found on III–IV phase transition in CsCoPO₄; the phase transition enthalpy decreases with decreasing the particle size around 0.1 mm. Such large particle size effects had been also observed in CsZnPO₄. However, no III–IV phase transition was observed in the particle smaller than 0.1 mm of CsZnPO₄, while such a critical size was not found in CsCoPO₄.     

Photocatalytic cleavage of single TiO2/DNA nanoconjugates

TiO(2)/DNA nanoconjugates were successfully fabricated by using the catechol moiety as a binding functional group, which was confirmed by steady-state absorption and fluorescence spectroscopies. Upon UV irradiation, the photocatalytic cleavage of the TiO(2)/DNA nanoconjugates was observed at the single-molecule level by using wide-field fluorescence microscopy. The decrease in the number of conjugates, which was estimated from the luminescent spots due to semiconductor quantum dots modified at the DNA strand, was significantly inhibited by a single A/C mismatch in the DNA sequences. This result strongly suggests that the migration of holes, which are injected from the photoexcited TiO(2) into the DNA, through the DNA bases plays an important role in the photocatalytic cleavage of the conjugates. The influences of the photogenerated reactive oxygen species (ROS) on the cleavage efficiency were also examined. According to the experimental results, it was concluded that oxidation of the catechol moiety and/or the DNA damage are key reactions in this process.     

Sensitive determination of bromine and iodine in aqueous and biological samples by electrothermal vaporization inductively coupled plasma mass spectrometry using tetramethylammonium hydroxide as a chemical modifier

A procedure for the simultaneous determination of bromine and iodine by inductively coupled plasma (ICP) mass spectrometry was investigated. In order to prevent the decrease in the ionization efficiencies of bromine and iodine atoms caused by the introduction of water mist, electrothermal vaporization was used for sample introduction into the ICP mass spectrometer. To prevent loss of analytes during the drying process, a small amount of tetramethylammonium hydroxide solution was placed as a chemical modifier into the tungsten boat furnace. After evaporation of the solvent, the analytes instantly vaporized and were then introduced into the ICP ion source to detect the (79)Br(+), (81)Br(+), and (127)I(+) ions. By using this system, detection limits of 0.77 pg and 0.086 pg were achieved for bromine and iodine, respectively. These values correspond to 8.1 pg mL(-1) and 0.91 pg mL(-1) of the aqueous bromide and iodide ion concentrations, respectively, for a sampling volume of 95 microL. The relative standard deviations for eight replicate measurements were 2.2% and 2.8% for 20 pg of bromine and 2 pg of iodine, respectively. Approximately 25 batches were vaporizable per hour. The method was successfully applied to the analysis of various certified reference materials and practical situations as biological and aqueous samples. There is further potential for the simultaneous determination of fluorine and chlorine.     

A rapid and easy multiresidue method for the determination of pesticide residues in vegetables, fruits, and cereals using liquid Chromatography/tandem mass spectrometry

The applicability of a rapid and easy multiresidue method for determination of pesticide residues in agricultural products by using liquid chromatography/tandem mass spectrometry (LC/MS/MS) was examined. Pesticide residues were extracted with acetonitrile in a disposable tube using a homogenizer, followed by salting out with anhydrous magnesium sulfate and sodium chloride. The extract was purified with a double-layered cartridge column (graphite carbon black/primary-secondary amine silica gel). After removal of the solvent, the extract was resolved in methanol-water and analyzed with LC/MS/MS. Recovery tests of 99 pesticide residues from 7 agricultural products were performed at 20 and 100 ng/g. Throughout all of the agricultural products tested, 47 pesticides exhibited satisfactory recoveries (70-120%) and relative standard deviations (<20%) at both concentrations. The time for processing of 12 samples to test solutions was approximately 2-3 h. This method could be useful for determination of pesticide residues in agricultural products.     

Guest‐responsive excimer emission in an α‐helix peptide bearing γ‐cyclodextrin and two naphthalene units

An α‐helix peptide (17 amino acids) bearing γ‐cyclodextrin (γ‐CD) and two naphthyl units (γ‐N₂17) was designed and prepared as a new type of chemosensor. The α‐helix peptide with γ‐CD sandwiched between two naphthyl moieties exhibits excimer emission by inserting the two naphthalene moieties into the γ‐CD cavity from the opposite sides in the side chain of the peptide. The two reference peptides, which have one naphthalene moiety and one γ‐CD unit, exhibit only monomer fluorescence and have larger binding constants for the examined guests than γ‐N₂17.