Highly Pure Synthesis,Spectral Assignments,and Two‐Photon Properties of Cruciform Porphyrin Pentamers Fused with Benzene Units

Tetrameric porphyrin formation of 2‐hydroxymethylpyrrole fused with porphyrins through a bicyclo[2.2.2]octadiene unit gave bicyclo[2.2.2]octadiene‐fused porphyrin pentamers. Thermal conversion of the pentamers gave fully π‐conjugated cruciform porphyrin pentamers fused with benzene units in quantitative yields. UV/Vis spectra of fully π‐conjugated porphyrin pentamers showed one very strong Q absorption and were quite different from those of usual porphyrins. From TD‐DFT calculations, the HOMO level is 0.49 eV higher than the HOMO?1 level. The LUMO and LUMO+1 levels are very close and are lower by more than 0.27 eV than those of other unoccupied MOs. The strong Q absorption was interpreted as two mutually orthogonal single‐electron transitions (683 nm: 86 %, HOMO→LUMO; 680 nm: 86 %, HOMO→LUMO+1). The two‐photon absorption (TPA) cross section value (σ⁽²⁾) of the benzene‐fused porphyrin pentamer was estimated to be 3900 GM at 1500 nm, which is strongly correlated with a cruciform molecular structure with multidirectional π‐conjugation pathways.     

Pneumatic handling of droplets on-demand on a microfluidic device for seamless processing of reaction and electrophoretic separation

Sequential operations of pre-separation reaction process by picoliter droplets and following electrophoretic separation process were realized in a single microfluidic device with pneumatic handling of liquid. The developed device consists of a fluidic chip made of PDMS, an electrode substrate, and a temperature control substrate on which thin film heater/sensor structures are fabricated. Liquid handling, including introduction of liquid samples, droplet generation, and merging of droplets, was implemented by pneumatic manipulation through microcapillary vent structures, allowing air to pass and stop liquid flow. Since the pneumatic manipulations are conducted in a fully automated manner by using a programmable air pressure control system, the user simply has to load liquid samples on each liquid port of the device. Droplets of 420 pL were generated with an accuracy of ± 2 pL by applying droplet generation pressure in the range of 40-100 kPa. As a demonstration, a binding reaction of a 15 mer ssDNA with a peptide nucleic acid oligomer used as an oligoprobe followed by denaturing electrophoresis to discriminate a single-base substitution was performed within 1.5 min. By exploiting the droplet-on-demand capability of the device, the influence of various factors, such as reaction time, mixing ratio and droplet configurations on the ssDNA-peptide nucleic acid binding reaction in the droplet-based process, was studied toward realization of a rapid detection method to discriminate rapid single-base substitution.     

Synthesis,Characterization, and Electronic Structures of Porphyrins Fused with Polycyclic Aromatic Ring Systems

A series of porphyrins fused with acenaphthylene, phenanthroline, and benzofluoranthene polycyclic aromatic rings were prepared by means of a 3+1 porphyrin synthesis approach and subsequent retro‐Diels–Alder reaction of bicyclo[2.2.2]octadiene‐fused precursors. Analysis of the magnetic circular dichroism spectra and the results of time‐dependent DFT calculations are used to identify the reasons for the trends observed in the wavelengths and relative intensities of the Q bands of the products. Michl's perimeter model is used as a conceptual framework to explain the changes in the relative energies of the frontier π‐molecular orbitals.     

Comparative study of the water oxidizing reactions and the millisecond delayed chlorophyll fluorescence in photosystem II at different pH

Water splitting activity, the multiline EPR signal associated with S(2)-state of the CaMn(4)-cluster and the fast and slow phases of the induction curve of the millisecond delayed chlorophyll fluorescence from photosystem II (PSII) in the pH range of 4.5-8.5 were studied in the thylakoid membranes and purified PSII particles. It has been found that O(2) evolution and the multiline EPR signal were inhibited at acidic (pK approximately 5.3) and alkaline (pK approximately 8.1) pH values, and were maximal at pH 6.0-7.0. Our results indicate that the loss of O(2) evolution and the S(2)-state multiline EPR signal associated with the decrease of the millisecond delayed chlorophyll fluorescence only in alkaline region (pH 7.0-8.5). Possible correlations of the millisecond delayed chlorophyll fluorescence components with the donor side reactions in PSII are discussed.     

Synthesis and photoluminescence properties of BF2 complexes with 1,3-diketone ligands

BF₂ complexes with 1,3-diketone ligands were synthesized, and their optical and electrochemical properties were studied. The colors of the complexes varied depending on the structures of the 1,3-diketone ligands. The absorption and emission maxima of the complexes with 1,3-diaryl-1,3-diketone ligands were considerably red shifted as compared to those of the complexes with 1-aryl-3-trifluoromethyl-1,3-diketone ligands, suggesting an extended π-conjugation of the 1,3-diaryl-1,3-diketone moieties. The molar absorption coefficients and quantum yields of the complexes with 1,3-diaryl-1,3-diketone ligands were larger than those of the complexes with 1-aryl-3-trifluoromethyl-1,3-diketone ligands. Cyclic voltammetry measurements revealed that the reduction potentials of the BF₂ complexes were higher than those of the free ligands. These complexes exhibited various emission colors in the solid states due to the intermolecular interactions.     

Enzymatic transformation of bacterial polyhydroxyalkanoates into repolymerizable oligomers directed towards chemical recycling

The enzymatic transformation into an oligomer was carried out with the objective of developing the chemical recycling of bacterial polyesters. Poly(R-3-hydroxyalkanoate)s (PHAs), such as poly[(R-3-hydroxybutyrate)-co-12%(R-3-hydroxyhexanoate)] and poly[(R-3-hydroxybutyrate)-co-12%(R-3-hydroxyvalerate)], were degraded by granulated Candida antarctica lipase B immobilized on hydrophilic silica (lipase GCA) in a diluted organic solvent at 70 degrees C. The degradation products were cyclic oligomers having a molecular weight of a few hundreds. The obtained cyclic oligomer was readily repolymerized by the same lipase (lipase GCA) to produce the corresponding polyester in a concentrated solution. The cyclic oligomer was copolymerized with epsilon-caprolactone using lipase to produce the corresponding terpolymers having an Mw of 21,000. This is the first example of the enzymatic chemical recycling of bacterial PHAs using lipase. Poly(R-3-hydroxybutyrate) [P(3HB)] was also degraded into the linear-type R-3HB monomer to trimer by P(3HB)-depolymerase (PHBDP) in phosphate buffer at 37 degrees C. The degradation using PHBDP required a longer reaction time compared with the lipase-catalyzed degradation in organic solvent. The monomer composition of the oligomer depended on the origin of the PHBDP. The R-3HB monomer was predominately produced by PHBDP from Pseudomonas stutzeri, while the R-3HB dimer was produced by PHBDP from Alcaligenes faecalis T1. Repolymerization of these oligomers by lipase in concentrated organic solvent produced a relatively low-molecular-weight P(3HB) (e.g., Mw=2,000). Degradation of P(3HB) by lipase in organic solvent into repolymerizable cyclic oligomer and degradation of P(3HB) by PHBDP in buffer into hydroxy acid type R-3HB dimer.     

Officinalioside,a new lignan glucoside from Borago officinalis L.

A new lignan glucoside, officinalioside (1), was isolated from n-BuOH fraction of the aerial parts of Borago officinalis L., together with four known compounds: actinidioionoside (2), roseoside (3), crotalionoside C (4) and kaempferol 3-O-β-D-galactopyranoside (5). The structure of the new compound was established by means of spectroscopic and chemical analyses. Compounds 1 and 2 showed a moderate DPPH radical scavenging activity (IC₅₀: 52.6 ± 1.70 and 41.3 ± 0.25 μM, respectively) comparable with that of the standard trolox (16.6 ± 2.2 μM) without any significant cytotoxicity towards human cell line A549 (IC₅₀ > 100 μM).     

Effect of various halide salts on the incompatibility of cyanocobalamin and ascorbic acid in aqueous solution

Combination of cyanocobalamin (VB12) and ascorbic acid (VC) has been widely seen in pharmaceutical products and dietary supplements. However, VB12 has been reported that its behavior in stability in aqueous solution is quite different when VC is mixed. In the present study, we examined the stabilities of these vitamins in acetate buffer (pH 4.8) using high performance liquid chromatography. Degradation of VB12 was not observed in the absence of VC in the buffer. However, when VC was mixed in the VB12 solution, VB12 concentrations decreased in accordance with VC degradation. VB12 and VC degradations were inhibited by adding sodium halides to acetate buffer at pH 4.8. These stabilization effects were also observed in the range from pH 3.5 to 5.3 and by adding potassium, magnesium, and calcium halides. Furthermore, our data demonstrated that increases in the halide anion concentrations and atomic number (Cl-相似文献