Anomaly of CH4 molecular assembly confined in single-wall carbon nanohorn spaces

Vibrational-rotational properties of CH(4) adsorbed on the nanopores of single-wall carbon nanohorns (SWCNHs) at 105-140 K were investigated using IR spectroscopy. The difference vibrational-rotational bands of the ν(3) and ν(4) modes below 130 K show suppression of the P and R branches, while the Q branches remain. The widths of the Q branches are much narrower than in the bulk gas phase due to suppression of the Doppler effect. These results indicate that the rotation of CH(4) confined in the nanospaces of SWCNHs is highly restricted, resulting in a rigid assembly structure, which is an anomaly in contrast to that in the bulk liquid phase.     

Preparation and StructuralCharacterization of RuII‐DMSO and RuIII‐DMSO‐substituted α‐Keggin‐type Phosphotungstates, [PW11O39RuIIDMSO]5– and [PW11O39RuIIIDMSO]4–, and Catalytic Activity for Water Oxidation

Ru^II‐ and Ru^III‐substituted α‐Keggin‐type phosphotungstates with a dimethyl sulfoxide (DMSO) ligand, [PW₁₁O₃₉Ru^IIDMSO]^5– ( 1 ) and [PW₁₁O₃₉Ru^IIIDMSO]^4– ( 2 ), were synthesized. Compound 1 was prepared by reaction of [PW₁₁O₃₉]^7– with [Ru^II(DMSO)₄]Cl₂ in water at 125 °C under hydrothermal conditions and was isolated as a cesium salt. Compound 2 was prepared by reaction of 1 with bromine in water at 60 °C and was isolated as a cesium salt. The compounds were characterized by cyclic voltammetry, elemental analysis, UV/Vis, IR,³¹P NMR, ¹⁸³W NMR, ¹H NMR, and XANES (Ru K‐edge and L₃‐edge)spectroscopic methods. Single crystal structural analysis of 1 revealed that Ru^II is incorporated in the α‐Keggin framework and coordinated by DMSO through a Ru–S bond. Cyclic voltammetry of 1 indicated that the incorporated Ru^II‐DMSO is reversibly oxidizable to the Ru^III‐DMSO derivative 2 . Compound 1 showed catalytic activity for water oxidation in the presence of cerium ammonium nitrate as an oxidant.     

Distribution of Hydrocarbon-Degrading Bacteria in the Soil Environment and Their Contribution to Bioremediation

A real-time PCR quantification method for indigenous hydrocarbon-degrading bacteria (HDB) carrying the alkB gene in the soil environment was developed to investigate their distribution in soil. The detection limit of indigenous HDB by the method was 1?×?10⁶ cells/g-soil. The indigenous HDB were widely distributed throughout the soil environment and ranged from 3.7?×?10⁷ to 5.0?×?10⁸ cells/g-soil, and the ratio to total bacteria was 0.1–4.3 %. The dynamics of total bacteria, indigenous HDB, and Rhodococcus erythropolis NDKK6 (carrying alkB R2) during bioremediation were analyzed. During bioremediation with an inorganic nutrient treatment, the numbers of these bacteria were slightly increased. The numbers of HDB (both indigenous bacteria and strain NDKK6) were gradually decreased from the middle stage of bioremediation. Meanwhile, the numbers of these bacteria were highly increased and were maintained during bioremediation with an organic nutrient. The organic treatment led to activation of not only the soil bacteria but also the HDB, so an efficient bioremediation was carried out.     

CP/MAS 13C NMR characterization of the isomeric states and intermolecular packing in tris(8-hydroxyquinoline) aluminum(III) (Alq3)

The isomeric states and intermolecular packing of tris(8-hydroxyquinoline) aluminum(III) (Alq(3)) in the alpha-, gamma-, and delta-crystalline forms and in the amorphous state, which are important for understanding the light-emitting and electron-transport properties, have been analyzed by CP/MAS (13)C NMR. This simple NMR experiment shows that the isomeric state of alpha- and amorphous Alq(3) is meridional, whereas that of gamma- and delta-Alq(3) is facial. In the amorphous Alq(3), the inclusion of facial isomers has been under debate. Our experiments show that meridional isomers are dominant in the amorphous Alq(3), although the existence of facial isomers cannot be completely denied. The local structure of amorphous Alq(3) is similar to that of alpha-Alq(3) and is significantly different from those of gamma- and delta-Alq(3). Among these Alq(3) samples, the effect of intermolecular interaction is not found only for gamma-Alq(3). This finding can explain the good solvent solubility of gamma-Alq(3), compared with the other crystalline forms. It is also shown that the structures are locally disordered not only for amorphous Alq(3) but also for alpha-Alq(3), although clear X-ray diffraction peaks are observed for alpha-Alq(3). In contrast, the local structures of gamma- and delta-Alq(3) are well defined. A clear relation is found between the spectral patterns of CP/MAS (13)C NMR and the fluorescence wavelengths; the samples, which consist of facial isomers, show blue-shifted fluorescence compared with those of meridionals.     

Characterization of Benzo[a]naphtho[2,3-f]pentalene: Interrelation between Open-shell and Antiaromatic Characters Governed by Mode of the Quinoidal Subunit and Molecular Symmetry

The singlet open-shell character and antiaromaticity are intriguing features in π-conjugated carbocycles. These two exhibit similar chemical and physical properties. However, they rarely coexist in the same molecule. Understanding the interrelation between the open-shell and antiaromatic characteristics in the same molecule is crucial to control the electronic properties. Herein we describe the synthesis and characterization of a new member of diareno[a,f]pentalene, benzo[a]naphtho[2,3-f]pentalene 6 . Unlike its isomer 5 with a closed-shell ground state, 6 exhibits an appreciable open-shell character and a moderate antiaromatic feature. The behaviors of the open-shell index (y₀) against the difference of the proton chemical signal (Δδ(H¹)) between pentalenide dianions/neutral pentalenes for our reported pentalenes 1 , 4 , 5 , and 6 give a thought-provoking conclusion about the interrelation between open-shell and antiaromatic characteristics in this series. The mode of the incorporated quinoidal moiety and the formal molecular symmetry are critical to balance these two characteristics.     

Influence of gamma radiation on microbiological parameters of the ethanolic fermentation of sugar-cane must

The influence of gamma radiation on reducing the population of some bacteria Bacillus and Lactobacillus that usually contaminate the sugar-cane must and its effects on acidity of the medium and viability of the yeast during fermentation were evaluated. The treatment with gamma radiation reduced the bacterial load of the sugar-cane must. Consequently, the volatile acidity produced during the fermentation of the must decreased and the viability of the yeast afterwards added increased.     

CP/MAS 13C NMR analyses of hydrogen bonding and the chain conformation in the crystalline and noncrystalline regions for poly(vinyl alcohol) films

The chain conformation and hydrogen bonding in the crystalline and noncrystalline regions have been characterized for atactic poly(vinyl alcohol) (PVA) films prepared under different conditions by CP/MAS ¹³C NMR analyses developed recently. The CH resonance lines of the crystalline and noncrystalline components split in different ways, depending significantly on casting solvents and annealing. These lines are found to be successfully resolved into 3–7 constituent lines by the least‐squares curve fitting. In this analysis, nine lines with different chemical shifts are prepared as elementary lines for the curve fitting by assuming the upfield shifts due to the γ‐gauche effect and the downfield shifts due to the formation of the intramolecular hydrogen bonds. The integrated intensities of the constituent lines thus obtained are also interpreted in terms of statistical calculations, assuming the random distribution of the trans and gauche conformations along PVA chains and the statistical distribution of the intramolecular and intermolecular hydrogen bonds between appropriate adjacent OH groups. On the basis of probabilities f_t and f_a for the trans conformation and the intramolecular hydrogen bond obtained through these analyses, the effects of casting solvents and annealing are discussed for both crystalline and noncrystalline components. © 2000 John Wiley & Sons, Inc. J Polym Sci B: Polym Phys 38: 1–9, 2000     

Designer self-assembling peptide scaffolds for 3-d tissue cell cultures and regenerative medicine

Biomaterial science has made enormous progress in the last few decades. Nonetheless, innovative biomaterials are still urgently needed to provide in vitro cell-culture models that more closely resemble three-dimensional (3-D) cell interactions and cyto-architectures in bodies and tissues. In this review, the recent advances toward this goal through molecular engineering of various designer self-assembling peptide scaffolds are discussed. These peptide scaffolds can be commercially and custom-tailor synthesized materials with high purity and may be not only useful for specific 3-D tissue cell cultures but also for tissue repair and regenerative therapies. Furthermore, these designer self-assembling peptide scaffolds have recently become powerful tools for regenerative medicine to repair nervous tissue, to stop bleeding in seconds, to repair infarctuated myocardia, as well as being useful medical devices for slow drug release.     

Magnetic alignment of the chiral nematic phase of a cellulose microfibril suspension

Stable suspensions of tunicate cellulose microfibrils were prepared by acid hydrolysis of the cellulosic mantles of tunicin. They formed a chiral nematic phase above a critical concentration. External magnetic fields were applied to the chiral nematic phase in two different manners to control its phase structure. (i) Static magnetic fields ranging 1-28 T were used to align the chiral nematic axis (helical axis) in the field direction. (ii) A rotating magnetic field (5 T, 10 rpm) was applied to unwind the helices and to form a nematic phase. These phenomena were interpreted in terms of the anisotropic diamagnetic susceptibility of the cellulose microfibril. The diamagnetic susceptibility of the microfibril is smaller in the direction parallel (chi( parallel)) to the fiber axis than in the direction perpendicular (chi( perpendicular)) to the fiber axis, that is, chi( parallel) < chi( perpendicular) < 0. Because the helical axis coincides with the direction normal ( perpendicular) to the fiber axis, the helical axis aligned parallel to the applied field. On the other hand, the rotating magnetic field induced the uniaxial alignment of the smallest susceptibility axis, that is, chi( parallel) in the present case, and brought about unwinding of the helices.     

In situ crystallization of bacterial cellulose II. Influences of different polymeric additives on the formation of celluloses Iα and Iβ at the early stage of incubation

Effects of polymeric additives with different degrees of polymerization (DP) or substitution (DS) on the crystallization of celluloses I and I have been examined at an early stage of the incubation of Acetobactor xylinum by using newly developed FT-IR spectroscopy. It was found that the mass fraction of cellulose I is greatly decreased with increasing concentrations of carboxymethyl cellulose sodium salt (CMC) or xyloglucan (XG) in the incubation medium. Such a decrease in the mass fraction of cellulose I, which corresponds to the enhanced crystallization of cellulose I, is more prominent for CMC or XG with lower DPs, but the additives with too low DPs are not so effective probably due to higher solubility and the lower adhesion on the surface of microfibrils. Moreover, the mass fractions of celluloses I and I are highly correlated with the crystallite size of microfibrils, indicating that I is crystallized in larger-size microfibrils while I is produced in smaller-size microfibrils. On the basis of these experimental results, the mechanism of the crystallization of celluloses I and I is discussed in the Acetobactor xylinum system.