Solubility and partial molar volume of carbon dioxide and ethane in crosslinked poly(ethylene oxide) copolymer

Experimental solubility and sorptive dilation data are reported for carbon dioxide and ethane in a crosslinked poly(ethylene oxide) (XLPEO) rubbery copolymer. Five different temperatures (253 ≤ T(K) ≤ 308) were considered, with a maximum gas pressure of 2.09 MPa (20.6 atm). The polymer was prepared by photopolymerization of a solution containing 70 wt % poly(ethylene glycol) methyl ether acrylate (PEGMEA) and 30 wt % poly(ethylene glycol) diacrylate (PEGDA). Sorption isotherms were described by the Flory‐Huggins model. For each gas, the Flory‐Huggins interaction parameter was a decreasing function of temperature and did not show a composition dependence. Dilation and sorption data were combined to calculate the partial molar volume (PMV) of the gases in the polymer, which was an increasing function of temperature. Based on a comparison with literature data for a XLPEO homopolymer prepared from pure PEGDA over the same range of operating conditions, an effect of the network composition on both gas solubility and PMV was found. © 2010 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 48: 456–468, 2010     

Comparison of dynamic mechanical and dielectric loss data on the β relaxation process in poly(ethylene terephthalate)

The dynamic mechanical and dielectric β loss peaks in poly(ethylene tereph-thalate) are shown not to be comparable. Only the dielectric data are internally consistent, and these are used to infer which conformational changes occur during commercial processing.     

A STUDY OF THE PHOTODYNAMIC EFFICIENCIES OF SOME EYE LENS CONSTITUENTS

We have studied the photochemical quantum yields of singlet oxygen production (using the RNO bleaching method) and superoxide production (using the EPR-spin trapping method and the SOD-inhibitable ferricytochrome c reduction spectral assay) of kynurenine (Ky), N-formylkynurenine (NFK), 3-hydroxykynurenine (3HK), kynurenic acid (KUA), and the flavins, riboflavin (RF) and flavin mononucleotide (FMN). Such a study of the photodynamic efficiencies is important since these compounds appear endogenously in the eye. The singlet oxygen quantum yields of the flavins and KUA are high, while Ky and 3HK generate no detectable amounts of singlet oxygen. The superoxide quantum yields of the sensitizers are low compared to their singlet oxygen, and Ky and 3HK produce no detectable amounts of superoxide. The production of the superoxide radical is enhanced in the presence of electron donor molecules such as EDTA and NADH. These results suggest that the production of oxyradicals in the lens may be modulated by the presence of endogenous electron donor molecules such as the coenzymes NADH and NADPH, which are present in significant amounts in some lenses. They also suggest that Ky and 3HK, which are known to be present in aged lenses, might play a protective rather than a deleterious role in the eye.     

Trace analysis of bromate and bromide with ion chromatography on coated reversed phase materials

 The ion-chromatographic method for trace analysis of bromate and bromide presented in this paper is based on coating of reversed phase (RP) material with an ionogenic agent, tetrakisdecylammonium bromide, to obtain a pseudo ion-exchange column. The analysis is carried out with usual HPLC pump and UV-detection near 200 nm. Some commercially available RP materials were tested for the coating procedure. The differences between the reversed phases are not significant. All HETP values are calculated between 0.02 and 0.14 mm. The calibration, the sensitivity of the method and the long-time stability of the coated column were tested with one selected RP material. It is shown that the simultaneous trace analysis of bromate and bromide in surface and drinking waters with chloride concentrations up to 50 mg/L is possible without any clean-up on Ag precolumns. A comparison of performance data with a determination method for bromate and bromide employing a commercially available equipment demonstrates the efficiency of the new technique. Received: 23 February 1996/Received: 10 May 1996/Accepted: 14 May 1996     

Electrophoretic separation of aniline derivatives using fused silica capillaries coated with acid treated single-walled carbon nanotubes

This paper reports on a new strategy for coating fused silica capillaries based on the ionic adsorption of acid treated single-walled carbon nanotubes (SWCNTs) on a poly(diallydimethylammonium chloride)-modified fused silica surface. The coated capillaries were used to demonstrate their performance for baseline separation of a mixture of seven nitrogen-containing aromatic compounds compared to capillary zone electrophoresis. This combined layer formed a coating material that could be useful for improvement of the selectivity of the solutes in an electrical field. We reasoned that the interaction of the solutes and the modified capillary wall occurred mainly via ionic interactions with the charged moieties of CNTs. The single-walled CNT modified capillaries were very stable and could be used for over 200 repeated analyses without compromising its analytical performance.     

Spectroscopic evidence for pi-pi interaction between poly(diallyl dimethylammonium) chloride and multiwalled carbon nanotubes

The interaction between multiwalled carbon nanotubes (MWCNTs) and aqueous poly(diallyl dimethylammonium) chloride (PDDA) was studied by X-ray photoelectron (XPS) and photoacoustic Fourier transform infrared (PA-FTIR) spectroscopies. We have found that the mild sonication of MWCNTs in aqueous PDDA results in a significant improvement of CNT dispersibility and greatly enhances their adhesion to Au and Si substrates. The MWCNT-PDDA interaction is due to the presence of an unsaturated contaminant in the PDDA chain, as confirmed by both XPS and PA-FTIR, which enters into a pi-pi interaction with the CNTs. Electrostatic group repulsions of the coated CNTs then provide the dispersibility and adhesion.     

Stabilization and size control of gold nanoparticles during laser ablation in aqueous cyclodextrins

Femtosecond laser radiation has been used to ablate a gold target in aqueous beta-cyclodextrin (CD) solutions to produce stable gold nanoparticle colloids with extremely small size (2 to 2.4 nm) and size dispersion (1 to 1.5 nm). On the basis of XPS and zeta-potential measurements, we propose a model involving chemical interactions between the gold and the CDs. The model includes both the hydrophobic interaction of the Au0 with the interior cavity of the CD and the hydrogen bonding of O- groups on the partially oxidized gold surface with -OH groups of the CDs.     

Laser Mass Spectrometry of Organophosphorus Pesticides and Related Compounds

Abstract

Laser mass spectra obtained for 20 organophosphorus (OP) compounds were systematically evaluated for groups containing analogous structural features. Variations in fragmentation can be understood based on simple organic reactions. While detailed mechanistic interpretations of the laser mass spectra (LMS) were not possible, the qualitative features in the LMS obtained from five compounds, not in the original set, could be predicted based on the characteristics of the other OP compounds studied. The success of the prediction lends credence to the qualitative models developed for rationalizing the LMS. A specific feature in the LMS of aromatic thionophosphates is a thiono-thiolo rearrangement. Detailed investigation into the phenomena involved comparison of LMS obtained from aromatic thionophosphates with spectra from electron impact, chemical ionization, field desorption, and secondary ion mass spectrometry. These results led to the conclusion that the rearrangement in laser mass spectrometry must occur during volatilization while the molecule/ion is in the “cloud” present immediately above the laser impact area.     

Polymerization (Polycondensation) of Alkanes over Fluosulfonic Acid and Antimony Pentafluoride

Several low molecular weight alkanes have been polymerized (polycondensed) over HSO₃ F-SbF₅ to yield a highly branched oily oligomer with a molecular weight range from the molecular weight of the monomer to around 700. The order of reactivity for butane and lower molecular alkanes is isobutane > n-butane > propane > ethane > methane. The reactivity is explained by the ease of attack of an acid proton derived from the acid on the alkane sigma bonds as well as the relative stability of the resulting cation formed. A cationic mechanism for this reaction is proposed.