Construction of Modified Carbon Paste Electrode for Highly Sensitive Simultaneous Electrochemical Determination of Trace Amounts of Copper (II) and Cadmium (II)

A chemically modified electrode was constructed for rapid, simple, accurate, selective and highly sensitive simultaneous determination of Cu(II) and Cd(II) using square wave anodic stripping voltammetry. The electrode was prepared by incorporation of SiO₂ nanoparticles, coated with a newly synthesized Schiff base, in carbon paste electrode. The limit of detection was found to be 0.28 ng mL^?1 and 0.54 ng mL^?1 for Cu(II) and Cd(II), respectively. The proposed chemically modified electrode was used for the determination of copper and cadmium in several foodstuffs and water samples.     

Comparing Singlet Oxygen Generation of Schiff Base Substituted Novel Silicon Phthalocyanines by Sonophotochemical and Photochemical Applications

Although the sonophotodynamic method has an effective therapeutic outcome for anticancer treatment compared with the photodynamic method, there are not enough related studies in the literature and this study aims to contribute to the development of sonophotodynamic studies. For this purpose, the Schiff base substituted silicon phthalocyanines were designed and synthesized as effective sensitizer candidates and the photophysicochemical and sonophotochemical features of the phthalocyanines were examined to increase singlet oxygen efficiency. The calculated Φ_Δ values indicate that the contribution of substituent groups improved the production of singlet oxygen compared with silicon (IV) phthalocyanine dichloride (SiPcCI₂) and also the sonophotochemical applications increased the singlet oxygen yields. The Φ_Δ values (Φ_Δ = 0.76 for axially bis-{4-[(E)-(pyridin-3-ylimino)methyl]phenol} substituted silicon (IV) phthalocyanine ( 2a ), 0.68 for axially bis-4-[(E)-{[(pyridin-3-yl)methyl]imino}methyl]phenol substituted silicon (IV) phthalocyanine ( 2b ) in photochemical study) reached to Φ_Δ = 0.98 for 2a , 0.94 for 2b in sonophotochemical study. This article will enrich the literature on increasing singlet oxygen yield.     

Synthesis and characterization of Mn(II), Au(III) and Zr(IV) hippurates complexes

Mn(II), Au(III) and Zr(III) complexes with N-benzoylglycine (hippuric acid) (abbreviation hipH) were synthesized and characterized by elemental analysis, molar conductivity, magnetic measurements, spectral methods (mid-infrared, (1)H NMR, mass, X-ray powder diffraction and UV/vis spectra) and simultaneous thermal analysis (TG and DTG) techniques. The molar conductance measurements proved that all hippuric acid complexes are non-electrolytes. The electronic spectra and magnetic susceptibility measurements were used to infer the structures. The IR spectra of the ligand and its complexes are used to identify the type of bonding. The kinetic thermodynamic parameters such as: E*, DeltaH*, DeltaS* and DeltaG* are estimated from the DTG curves. The free ligand and its complexes have been studied for their possible biological antifungal activity.     

Physiochemical properties of various polymer substrates and their effects on microchip electrophoresis performance

A suite of polymers were evaluated for their suitability as viable substrate materials for microchip electrophoresis applications, which were fabricated via replication technology. The relevant physiochemical properties investigated included the glass transition temperature (T(g)), UV-vis absorption properties, autofluorescence levels, electroosmotic flow (EOF) and hydrophobicity/hydrophilicity as determined by sessile water contact angle measurements. These physiochemical properties were used as a guide to select the proper substrate material for the intended microchip electrophoretic application. The T(g) of these polymers provided a guide for optimizing embossing parameters to minimize replication errors (REs), which were evaluated from surface profilometer traces. RE values ranged from 0.4 to 13.6% for the polymers polycarbonate (PC) and low-density polyethylene (LDPE), respectively. The absorption spectra and autofluorescence levels of the polymers were also measured at several different wavelengths. In terms of optical clarity (low absorption losses and small autofluorescence levels), poly(methyl methacrylate), PMMA (clear acrylic), provided ideal characteristics with autofluorescence levels comparable to glass at excitation wavelengths that ranged from 488-780 nm. Contact angle measurements showed a maximum (i.e., high degree of hydrophobicity) for polypropylene (PP), with an average contact angle of 104 degrees +/-3 degrees and a minimum exhibited by gray acrylic, G-PMMA, with an average contact angle of 27 degrees +/-2 degrees. The EOF was also measured for thermally assembled chips both before and after treatment with bovine serum albumin (BSA). The electrophoretic separation of a mixture of dye-labeled proteins including; carbonic anhydrase, phosphorylase B, beta-galactosidase, and myosin, was performed on four different polymer microchips using laser-induced fluorescence (LIF) excitation at 632.8 nm. A maximum average resolution of 5.04 for several peak pairs was found with an efficiency of 6.68 x 10(4) plates for myosin obtained using a BSA-treated PETG microchip.     

Stemmosides C and D, two novel unusual pregnane glycosides from Solenostemma argel: structural elucidation and configurational study by a combined NMR-quantum mechanical strategy

Stemmosides C and D, two novel pregnane glycosides characterized by an unusual C-17 side chain were isolated from the pericarps of Solenostemma argel. In addition, stemmoside D displays an uncommon 14β proton configuration, apparently being the first pregnane isolated from plants known to have a 15 keto, cis CD ring junction. Their structures have been established by ESIMS and NMR experiments. The relative configuration of the molecules was determined using a strategy based on the simulation of ¹H, ¹³C, and J coupling NMR parameters. DFT calculations of ¹H and ¹³C chemical shifts, and of the ¹H homonuclear spin–spin coupling constants were performed with the mPW1PW91 functional using the 6-31G(d,p) basis set on the fully optimized geometries of all the possible stereoisomers.     

Development and application of a validated stability-indicating high-performance liquid chromatographic method using photodiode array detection for simultaneous determination of granisetron, methylparaben, propylparaben, sodium benzoate, and their main degradation products in oral pharmaceutical preparations

A simple, rapid, and sensitive RP-HPLC method using photodiode array detection was developed and validated for the simultaneous determination of granisetron hydrochloride, 1-methyl-1H-indazole-3-carboxylic acid (the main degradation product of granisetron), sodium benzoate, methylparaben, propylparaben, and 4-hydroxybenzoic acid (the main degradation product of parabens) in granisetron oral drops and solutions. The separation of the compounds was achieved within 8 min on a SymmetryShield RP18 column (100 x 4.6 mm id, 3.5 microm particle size) using the mobile phase acetonitrile--0.05 M KH2PO4 buffered to pH 3 using H3PO4 (3+7, v/v). The photodiode array detector was used to test the purity of the peaks, and the chromatograms were extracted at 240 nm. The method was validated, and validation acceptance criteria were met in all cases. The robust method was successfully applied to the determination of granisetron and preservatives, as well as their degradation products in different batches of granisetron oral drops and solutions. The method proved to be sensitive for determination down to 0.04% (w/w) of granisetron degradation product relative to granisetron and 0.03% (w/w) 4-hydroxybenzoic acid relative to total parabens.     

Preparation of tetraheptylammonium iodide-iodine graphite-multiwall carbon nanotube paste electrode: electrocatalytic determination of ascorbic acid in pharmaceuticals and foods

The present work describes the construction of a new modified graphite-multiwall carbon nanotube paste electrode by casting the appropriate mixture of tetraheptylammonium iodide-iodine as a new modifier. The modified paste electrode was used for the determination of ascorbic acid (AA) in a phosphate buffer solution (pH 2.0). When compared to activated carbon, a graphite and multiwall carbon nanotube paste electrode containing a new modifier, the proposed modified paste electrode not only shifted the oxidation potential of AA towards a less-positive potential but also enhanced its oxidation peak current. Further, the oxidation of AA was highly stable at the modified paste electrode. The optimum analytical conditions were sought. The current response of AA increases linearly while increasing its concentration from 5.6 × 10(-5) to 1.2 × 10(-2) M with a correlation coefficient of 0.9991; the detection limit (3σ) was found to be of 3.6 × 10(-5) M. The present modified paste electrode was also successfully used for the determination of AA in the presence of common interference compounds. The present modified electrode was successfully demonstrated towards the determination of AA in pharmaceutical and food samples.     

New pyranosyl cembranoid diterpenes from Sarcophyton trocheliophorum

During our continual searching programme for novel bioactive metabolites from Sarcophyton trocheliophorum, collected from Red Sea, we describe herein the isolation and structural elucidation of further two new pyrane-based cembranoid diterpenes: 9-hydroxy-7,8-dehydro-sarcotrocheliol (1) and 8,9-expoy-sarcotrocheliol acetate (2), along with the well-known sarcotrocheliol acetate (3), (+)-sarcophine (4), (+)-sarcophytoxide (5) and (-)-sarcophytoxide (6). The chemical structures of compounds 1 and 2 were determined on the basis of 1D and 2D NMR (¹H, ¹³C, ¹H–¹H COSY, HMQC, HMBC and NOE), mass spectra (ESI and HR-ESIMS) and by comparison with related structures. The antimicrobial activities of the reported compounds 1–6 were investigated. According to the molecular docking study of compounds 1–6 using 3D structure of α,β tubulin in complex with taxol (PDB code 1JFF) and epothilone A (PDB code 1TVK), sarcophine (4) displayed the highest affinity towards both crystal structures, followed by 5 and 6, meanwhile pyrane-based cembranoid diterpenes (1–3) showed less affinity.     

Asymmetric aldol addition of α-azido ketones to ethyl pyruvate mediated by a cinchona-based bifunctional urea catalyst

The first asymmetric synthesis of ethyl 4-aryl-3-azido-2-hydroxy-2-methyl-4-oxobutanoates via a cinchona organocatalyst induced aldol addition of α-azido ketones to ethyl pyruvate has been developed. The coupling reaction under optimized conditions was carried out to furnish tetrafunctionalized synthons with enantioselectivities of up to 91:9 and enriched diastereoselectivities of up to 95:5 (syn:anti).     

Indirect atomic absorption and atomic emission spectrometric determination of antazoline,hydralazine and amiloride hydrochlorides and quinine sulphate

Ion-association complexes of antazoline HCl [I], hydralazine HCl [II], amiloride HCl [III] and quinine sulphate [IV] with [Co(SCN)₄]^2– and [Co(NO₂)₆]^3– were precipitated and the excess unreacted cobalt complex was determined. A new method using atomic emission and atomic absorption spectrometry for the determination of the above drugs in pure solutions and pharmaceutical preparations is given. The drugs can be determined in the ranges 0.3–3.0, 0.19–1.96, 0.3–3.0, and 0.78–7.82 mg/25 ml solutions of I, II, III, and IV, respectively, with mean relative standard deviations of 0.65–2.03 % and recovery values of 95.76–101.2% indicating high precision and accuracy.