Three different β‐cyclodextrins direct the emulsion copolymerization of a highly fluorinated methacrylate toward distinctive nanostructured particle morphologies

Stable colloidal dispersions of nanostructured semifluorinated acrylic particles with an unfluorinated core and an outer layer consisting of copolymers of the highly hydrophobic and lipophobic heptadecafluorodecyl methacrylate (FMA) were successfully synthesized with the assistance of three different cyclodextrins as phase‐transfer catalysts: β‐cyclodextrin (β‐CD), hydroxypropyl β‐cyclodextrin (HpCD), and methyl β‐cyclodextrin (MeCD). While all the cyclodextrins form a stable inclusion complex (IC) with FMA, only the ICs with the more hydrophilic HpCD and MeCD are soluble in water. Nevertheless, incorporation of FMA in the particle shell copolymer could be achieved also when using β‐CD. On the other hand, the morphology of the nanostructured particles was characterized by a “patchy” fluorinated shell dependent on the cyclodextrin used, the best results being obtained with MeCD. A monomer‐starved semicontinuous emulsion polymerization procedure was essential to favor the CD‐mediated incorporation of FMA into the copolymer structure and to achieve a stable colloidal dispersion even in the presence of small amounts of mixed anionic–nonionic surfactants. The thermal and surface properties of the latex films showed a good correlation with the shell composition and patchy nanostructured morphology of the particles. © 2011 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2011     

The Coordination and Transformation of Arene Rings by Transition Metal Carbonyl Cluster Complexes

A survey of the synthetic pathways and of the reactivity and catalytic activity of transition metal carbonyl clusters substituted with benzyne (and, for comparison, benzene and diene) ligands is given. Cluster-surface analogies are helpful in gaining an understanding of the homogeneous and heterogeneous catalytic behaviour of the clusters.     

Cationic,Methylene‐Bridged,Intramolecular Donor‐Acceptor Systems Based on Zirconium and Hafnium and Phosphino‐methanides

A new access to cationic zirconium and hafnium compounds [L₂MCH₂PR₂][MeB(C₆F₅)₃] (L = Cp, Ind; R = iso‐Pr, tert‐Bu; M = Zr, Hf) exhibiting an intramolecular donor‐acceptor system was established by treating the precursors L₂M(Me)CH₂PR₂ with B(C₆F₅)₃ (BCF). Precursors 1 – 6 [L₂M(Me)CH₂PR₂ with L = Cp, Ind; R = iso‐Pr, tert‐Bu; M = Zr, Hf] were fully characterized. The crystal structures of these compounds revealed large M–CH₂–P bond angles with values of about 134° indicating the absence of interactions between the Lewis‐acid and Lewis‐base. The cationic compounds [L₂MCH₂PR₂][MeB(C₆F₅)₃] ( 7 – 12 ) were obtained by treatment of 1 – 6 with BCF. They were characterized by NMR spectroscopy, mass spectrometry, and elemental analyses; in H/D‐scrambling experiments with H₂/D₂ mixtures 7 – 12 disclosed their reactivity towards cleavage of hydrogen.     

Efficient <Emphasis Type="Italic">Candida rugosa</Emphasis> lipase immobilization on Maghnite clay and application for the production of (<Emphasis Type="Italic">1R</Emphasis>)-(−)-Menthyl acetate

This work focused on the identification of natural, economical, and efficient supports for immobilization of Candida rugosa lipase (CRL) to catalyze the resolution of (±)-menthol. To this purpose, CRL has been immobilized on natural montmorillonite from Algeria (Maghnite-H), ion-exchange resins (Amberjet^®1200-H and Amberjet^®4200-Cl), and diatomaceous earth (Celite^®545). After a preliminary screening of supports, the immobilization of CRL led to a markedly improved enantioselectivity. Excellent enantioselectivity (E ≥ 134) was achieved by the four supported lipases (E = 68 for free enzyme). Compared to the three other supports tested, higher enantioselectivity was observed with Maghnite-H used as immobilization matrix. In this work, the effects of solvent, reaction time, and temperature, on the conversion as well as on enantioselectivity were investigated. The maximum of conversion (% C = 43%) with high enantiomeric excess of products (eep > 99) was obtained when the reaction is catalyzed by CRL immobilized on Maghnite-H at 30 °C for 24 h, and using toluene as selected solvent. Immobilized CRL on Maghnite-H exhibited good thermostability over a wide temperature range (30–90 °C) compared to the free one. These results suggest that CRL immobilized on Maghnite-H has good potential as biocatalyst for the production of (1R)-(?)-menthyl acetate.     

Novel and highly sensitive mixed-polymeric electrokinetic chromatography system for determination of contaminants and impurities of heparin samples

A mixed‐polymeric electrokinetic chromatography system has been developed for the simultaneous determination of a contaminant like oversulfated condroitin sulfate (OSCS) and impurities expressed as dermatan (Der) in heparin (Hep) samples. The EKC system consisted of 0.5% w/v polymeric β‐CD, 0.4% w/v tetronic^® 1107 and 400 mM tris‐phosphate buffer at pH 3.5. The optimized electrophoretic conditions included the use of an uncoated‐silica capillary of 50 cm of total length and 75 μm id, an applied voltage of ?7 kV, a temperature of 30°C and 200 nm UV‐detection. The highly sensitive method developed showed low values of LOD, 0.07% w/w (0.07 μg/mL) (OSCS) and 0.1% w/w (0.1 μg/mL) (Der), and values of LOQ 0.2% w/w (0.2 μg/mL) (OSCS) and 0.3% w/w (0.3 μg/mL) (Der) with a concentration level of Hep sample as low as 0.1 mg/mL. Additional parameters of validation such as specificity, linearity, accuracy, and robustness were evaluated according to international guidelines. Owing to its simplicity, high sensitivity, and reliability, the proposed method can be an advantageous alternative to the traditional methodologies for the analysis of Hep in raw material and specially in finished products because of the low amounts of Hep sample required.     

Laboratory measurement of sound absorption of occupied pews and standing audiences

Places of worship, as well as other performing spaces or large arenas are characterized by lightweight pews or seats, with moderate or negligible upholstery, leading to very low absorption coefficients. Consequently, the audience becomes the most important sound absorbing element, capable of playing a fundamental role in determining the acoustic characteristics of the space. Consequently accurate knowledge of its acoustic properties is required for any design purpose. Several studies have been carried out with reference to audiences seated on upholstered theatre seats but there is a considerable lack of information about occupied pews. The well known difficulty of taking into account edge effects during such measurements poses further questions as well as the effect of the density of occupation, and the seasonal variations due to clothing. This paper presents the results of a series of laboratory measurements aimed at clarifying such aspects. The measurements showed that the edge effects are negligible and that total absorption is better related to the number of persons present than to the area they cover. Nonetheless, as the density grows, or when the audience is seated, there is a reduction in absorption which may be explained by the reduction in exposed body surface. Lightweight clothes show a considerable reduction in sound absorption over all the frequency bands, suggesting that significant seasonal fluctuations in reverberation time should be expected in places where the audience is the only sound absorbing surface.