Propene polymerization with Ziegler-type catalysts formed from Me2Si(Ind)2ZrMe2 and cation-generating reagents

Kinetic and polymer analytical results obtained with the systems Me₂Si(Ind)₂ZrMe₂/[B(C₆F₄Si(i-Pr)₃)₄]⁻ [(C₆H₅)₃C]⁺ (2) and Me₂Si(Ind)₂ZrMe₂/[B(C₆F₅)₄]⁻ [(C₆H₅)₃C]⁺ (3) in olefin polymerizations are compared (Me: methyl; Ind: indenyl). Both systems show that the polymerization rate increases with increasing metallocene concentration in a surplus due to the formation of binuclear species. The expected influence of increasing cation-anion distance on the stereo-errors of the poly(propylene)s when changing from system 3 into system 2 could not be detected.     

Asymmetric Synthesis of Densely Functionalized Medium‐Ring Carbocycles and Lactones through Modular Assembly and Ring‐Closing Metathesis of Sulfoximine‐Substituted Trienes and Dienynes

An asymmetric synthesis of densely functionalized 7–11‐membered carbocycles and 9–11‐membered lactones has been developed. Its key steps are a modular assembly of sulfoximine‐substituted C‐ and O‐tethered trienes and C‐tethered dienynes and their Ru‐catalyzed ring‐closing diene and enyne metathesis (RCDEM and RCEYM). The synthesis of the C‐tethered trienes and dienynes includes the following steps: 1) hydroxyalkylation of enantiomerically pure titanated allylic sulfoximines with unsaturated aldehydes, 2) α‐lithiation of alkenylsulfoximines, 3) alkylation, hydroxy‐alkylation, formylation, and acylation of α‐lithioalkenylsulfoximines, and 4) addition of Grignard reagents to α‐formyl(acyl)alkenylsulfoximines. The sulfoximine group provided for high asymmetric induction in steps 1) and 4). RCDEM of the sulfoximine‐substituted trienes with the second‐generation Ru catalyst stereoselectively afforded the corresponding functionalized 7–11‐membered carbocyles. RCDEM of diastereomeric silyloxy‐substituted 1,6,12‐trienes revealed an interesting difference in reactivity. While the (R)‐diastereomer gave the 11‐membered carbocyle, the (S)‐diastereomer delivered in a cascade of cross metathesis and RCDEM 22‐membered macrocycles. RCDEM of cyclic trienes furnished bicyclic carbocycles with a bicyclo[7.4.0]tridecane and bicyclo[9.4.0]pentadecane skeleton. Selective transformations of the sulfoximine‐ and bissilyloxy‐substituted carbocycles were performed including deprotection, cross‐coupling reaction and reduction of the sulfoximine moiety. Esterification of a sulfoximine‐substituted homoallylic alcohol with unsaturated carboxylic acids gave the O‐tethered trienes, RCDEM of which yielded the sulfoximine‐substituted 9–11‐membered lactones. RCEYM of a sulfoximine‐substituted 1,7‐dien‐10‐yne showed an unprecedented dichotomy in ring formation depending on the Ru catalyst. While the second‐generation Ru catalyst gave the 9‐membered exo 1,3‐dienyl carbocycle, the first‐generation Ru catalyst furnished a truncated 9‐membered 1,3‐dieny carbocycle having one CH₂ unit less than the dienyne.     

Acrylation of biomass: A review of synthesis process: Know-how and future application directions

Over the years, eco-friendly raw biomass is being investigated to develop novel green monomer and oligomer components for sustainable polymer materials synthesis. The use of naturally obtained biomass can reduce the dependence on petrochemical suppliers and the impact of petroleum prices. Polymer materials obtained from biomass are a competitive alternative comparing with those made from petrochemicals. Domestically and industrially used vegetable oil derivatives are considered widely available, while cellulose derivatives are the most abundant natural polymers. Biobased acrylic polymers developed from vegetable oils and cellulose are very popular nowadays. Using acrylic derivatives of vegetable oils and cellulose as naturally obtained materials leads to long-lasting biopolymers with a wide range of high exploitation properties and applications. The characteristics of vegetable oil- and cellulose-based acrylate resins of high-biorenewable carbon content are suitable for industrial application, while their role is still underestimated. A brief analysis of biomass-derived biopolymer resin compositions, properties, and applications is critically outlined herein.     

Clickable report tags for identification of modified peptides by mass spectrometry

The identification and quantification of modified peptides are critical for the functional characterization of post-translational protein modifications (PTMs) to elucidate their biological function. Nowadays, quantitative mass spectrometry coupled with various bioinformatic pipelines has been successfully used for the determination of a wide range of PTMs. However, direct characterization of low abundant protein PTMs in bottom-up proteomic workflow remains challenging. Here, we present the synthesis and evaluation of tandem mass spectrometry tags (TMT) which are introduced via click-chemistry into peptides bearing alkyne handles. The fragmentation properties of the two mass tags were validated and used for screening in a model system and analysis of AMPylated proteins. The presented tags provide a valuable tool for diagnostic peak generation to increase confidence in the identification of modified peptides and potentially for direct peptide-PTM quantification from various experimental conditions.     

Structure elucidation of β-carotene isomers by HPLC-NMR coupling using a C30 bonded phase

The separation of cis/trans isomers of β-carotene has been performed with a C₃₀ stationary phase employing ¹H NMR spectroscopy as an on-line detection technique. 1D as well as 2D NMR spectra have been recorded in the stopped-flow mode for the predominant chromatographic peaks. Structural assignment of the five identified isomers was performed via comparison of simulated 1D ¹H NMR spectra on the basis of the structures of β-carotene cis/trans isomers with the experimental data, and also by the analysis of the proton-proton connectivities in the 2D NMR spectra of three isomers with the highest concentration. The chromatographic retention behaviour of the isomers agreed well with previously reported data. The advantage of the applied hyphenated coupling technique compared to conventional off-line techniques lies in the fact that chromatographic separation and NMR detection are performed in a closed system, so that reisomerization of the separated compounds is inhibited. Received: 29 May 1996 / Revised: 1 July 1996 / Accepted: 4 July 1996     

Analysis of semiconducting materials by high-resolution radiofrequency glow discharge mass spectrometry

The analytical capabilities of a high-resolution mass spectrometer in combination with a 13.56 MHz glow discharge ion source for the analysis of semiconducting materials (silicon carbide and gallium arsenide) were studied. It was shown that single positively charged ions of sample material have about 10 eV higher average energy than the ions of the discharge and residual gas. Therefore effective energy separation of the ions of analyte from the ions of the discharge and residual gas was achieved by adjusting the ion transfer optics (breadth and position of energy slit), which improves the analytical capabilities of the developed method.Some analytical applications are presented to illustrate the performance of r.f. GDMS for the bulk analysis of semiconducting materials. The results of the trace element analysis of gallium arsenide and silicon carbide samples are compared with data of independent methods (LIMS, ICP-AES, SIMS).Dedicated to Professor Dr. rer. nat. Dr. h.c. Hubertus Nickel on the occasion of his 65th birthdayOn leave from the Institute of Inorganic Chemistry, 630090 Novosibirsk, Russia     

Mass spectrometric analysis of ceramic components for solid oxide fuel cells

For the determination of trace impurities in ceramic components of solid oxide fuel cells (SOFCs), some mass spectrometric methods have been applied such as spark source mass spectrometry (SSMS), laser ionization mass spectrometry (LIMS), laser ablation inductively coupled plasma mass spectrometry (LA-ICP-MS) and inductively coupled plasma mass spectrometry (ICP-MS). Due to a lack of suitable standard reference materials for quantifying of analytical results on La _x Sr _y MnO₃ cathode material a matrix-matched synthetic standard-high purity initial compounds doped with trace elements-was prepared in order to determine the relative sensitivity coefficients in SSMS and LA-ICP-MS. Radiofrequency glow discharge mass spectrometry (rf-GDMS) was developed for trace analysis and depth profiling of thick non-conducting layers. Surface analytical techniques, such as secondary ion mass spectrometry (SIMS) and sputtered neutral mass spectrometry (SNMS), were used to determine the element distribution on surfaces (homogeneity) and the surface contaminants of SOFC ceramic layers.Dedicated to Professor Dr. rer. nat. Hubertus Nickel on the occasion of his 65th birthday     

Femtosecond Spectroscopic Studies on the Red Light-Absorbing Form of Oat Phytochrome and 2,3-Dihydrobiliverdin

Abstract— The excited state behavior of the red light-absorbing form of phytochrome (Pr) was studied on the femtosecond time scale. After excitation of Pr with 75 fs laser pulses at 616 nm the kinetics of the transient absorption changes was recorded at selected wavelengths probing mainly the bleaching of the Pr ground-state absorption and the stimulated emission. The kinetic data obtained indicate the population of an excited state with a 3 ps lifetime immediately after excitation. This state precedes the formation of another excited state with a 32 ps lifetime. The decay of the latter state is followed by the appearance of a first product state that is assumed to represent lunii-R. In addition, 2,3-dihydrobiliverdin, which is considered to be an adequate model of the Pr chro-mophore, was included in the femtosecond studies. The absorption difference spectra recorded at various delay times show an immediate bleaching of the ground-state absorption. Simultaneously with bleaching a broad transient absorption appears between 410 and 525 nm. The data analysis yields similar kinetic components as they were observed in the decay of Pr. It is suggested from this finding that within the first tens of picoseconds after excitation the excited-state properties of Pr are mainly determined by the properties of the chromophore itself.     

2- and 2,7-Substituted para-N-Methylpyridinium Pyrenes: Syntheses,Molecular and Electronic Structures,Photophysical, Electrochemical,and Spectroelectrochemical Properties and Binding to Double-Stranded (ds) DNA

Two N-methylpyridinium compounds and analogous N-protonated salts of 2- and 2,7-substituted 4-pyridyl-pyrene compounds were synthesised and their crystal structures, photophysical properties both in solution and in the solid state, electrochemical and spectroelectrochemical properties were studied. Upon methylation or protonation, the emission maxima are significantly bathochromically shifted compared to the neutral compounds, although the absorption maxima remain almost unchanged. As a result, the cationic compounds show very large apparent Stokes shifts of up to 7200 cm⁻¹. The N-methylpyridinium compounds have a single reduction at ca. −1.5 V vs. Fc/Fc⁺ in MeCN. While the reduction process was reversible for the 2,7-disubstituted compound, it was irreversible for the mono-substituted one. Experimental findings are complemented by DFT and TD-DFT calculations. Furthermore, the N-methylpyridinium compounds show strong interactions with calf thymus (ct)-DNA, presumably by intercalation, which paves the way for further applications of these multi-functional compounds as potential DNA-bioactive agents.