Mechanical Properties of Organic-Inorganic Hybrid Materials Determined by Indentation Techniques

The mechanical properties of hybrid materials consisting of polystyrene (PS), which was cross-linked with different proportions of the multifunctional cluster Zr₆O₄(OH)₄(methacrylate)₁₂ (Zr6) were investigated. With the help of (micro)indentation and scratch testing, the influence of the Zr6 clusters on mechanical properties, such as hardness, stiffness, creep, craze initiation, and scratch resistance was shown. There was only a slight increase in hardness and in indentation modulus with higher cluster loadings. While this observation was in agreement with the compression behaviour of the materials, the tensile properties showed a much stronger dependence on the Zr6 content. With increasing cluster loading, an increase of craze initiation stress, as determined by ball indentation experiments, was found. Performing scratch testing with constant load, a reduction of pile-up and a stronger recovery were observed for the hybrid materials compared to the neat PS. Scratch tests with a constant increase of load showed an increase of the critical load for crack opening during scratching.     

Alcohol sensing membrane based on immobilized ruthenium(II) complex in carboxylated PVC and surface covalently bonded alcohol oxidase

Alcohol sensing membranes coated on overhead transparency films for the continuous monitoring of ethanol, propanol and butanol are presented. Alcohol oxidation catalyzed by alcohol oxidase in conjunction with the fluorescence quenching reaction of oxygen-sensitive dye ion-pair, tris(4,7-diphenyl-1,10-phenanthroline) ruthenium(II) didodecylsulphate was chosen for the determination. Alcohol oxidase was immobilized covalently on a plasticized carboxylated poly(vinyl chloride) membrane and the oxygen-sensitive dye ion-pair was entrapped in the same membrane. The sensing membrane relates oxygen consumption, as a result of enzymatic oxidation, to alcohol concentration. Measurements have been performed in air-saturated alcohol standard solutions of pH 7.0. Storage stability, reproducibility and the effect of pH on sensing membrane performance have been studied in detail. The alcohol sensing membrane proposed here is simple to prepare and has a fairly rapid response time of <1 min. It has been successfully applied to the determination of the ethanol contents in various spirits.     

Ultrathin polymer film formation by collision-induced cross-linking of adsorbed organic molecules with hyperthermal protons

A new synthetic approach for the formation of ultrathin polymer films with customizable properties was developed. In this approach, the kinematic nature of proton collisions with simple organic molecules condensed on a substrate is exploited to break C-H bonds preferentially. The subsequent recombination of carbon radicals gives a cross-linked polymer thin film, and the selectivity of C-H cleavage preserves the chemical functionalities of the precursor molecules. The nature and validity of the method are exemplified with theoretical results from ab initio molecular dynamics calculations and experimental evidence from a variety of characterization techniques. Its applicability is demonstrated by the synthesis of ultrathin polymer films with precursor molecules such as dotriacontane, docosanoic acid, poly(acrylic acid) oligomer, and polyisoprene. The approach is fundamentally different from conventional chemical synthesis as it involves an unusual mix of physical and chemical processes including charge exchange, projectile penetration, kinematics, collision-induced dissociation, inelastic energy transfer, chain transfer, and chain cross-linking.     

A photoactivated diazopyruvoyl cross-linking agent for bonding tissue containing type-I collagen

On the basis of the earlier examples of diazopyruvoyl (DAP) groups reported by Lawton for covalent binding and cross-linking of proteins and oligopeptides and our recent demonstration that a coumaryl diazopyruvamide was used to label Type-I collagen, we have extended our investigations to the synthesis and cross-linking capabilities of a bis-DAP polyethylene glycol to cross-link Type-I collagen. The new photoactivated cross-linking agent, N,N'-bis(3-diazopyruvoyl)-2,2'-(ethylenedioxy)bis(ethylamine) (DPD, 2), has been designed and synthesized specifically to "weld" collagenous tissues by cross-linking Type-I collagen. A working model for the photochemical welding studies of collagenous tissues was developed using gelatin strips (gel strips) composed of denatured Type-I collagen. Gel strips are transparent to near-UV and visible light, uniform in thickness, and have reproducible composition. Furthermore, the availability of nucleophilic amine sites in gel strips was demonstrated by reaction with o-phthalaldehyde, producing a fluorescent derivative of the protein. Gel strips were coated with a solution of DPD in chloroform 7 irradiated at 320-390 nm, and the resulting bonded gel strips were tested for the strength of the weld. The welds were generally brittle and had average tensile strengths that exceeded 100 N/cm2. Welds were not formed in the absence of light or DPD. Scanning electron microscopy studies revealed a pockmarked surface from severed welds. Welds of rabbit Achilles tendon were also obtained using the tethered diazopyruvamide. These welds were much weaker, having an average tensile strength of 11.95 N/cm2 for DPD-2,2'-ethylenedioxy(bis)ethylamine comonomers in the cross-linking reaction. In both studies the welds obtained by this method were significantly stronger than the controls.     

Stereoselective hydroxylation of an achiral cyclopentanecarboxylic acid derivative using engineered P450s BM-3

Substrate engineered, achiral carboxylic acid derivative was biohydroxylated with various mutants of cytochrome P450 BM-3 to give two out of the four possible diastereoisomers in high de and ee. The BM-3 mutants exhibit up to 9200 total turnovers for hydroxylation of the engineered substrate, which without the protecting group is not transformed by this enzyme.     

Polymerization behavior of 2,2,6,6-tetramethylpiperidinyl methacrylate: A monomer carrying a hindered amine group

Copolymers of 2,2,6,6-tetramethylpiperidinyl methacrylate (TPMA) with styrene (S) and with methyl methacrylate (MMA) were synthesized using AIBN as initiator. S–TPMA copolymers from feed ranging from 0.10–0.80 mole fractions TPMA and MMA-TPMA copolymers from feed of 0.04–0.85 mole fractions TPMA were used in the determination of monomer reactivity ratios r₁, r₂. Four different methods were employed in the calculations of r₁ and r₂ and all calculated results were in good agreement with each other. The structure of S–TPMA copolymers was inferred to be of an alternating nature while that of MMA–TPMA copolymers was random. Both copolymers are potential hindered amine light stabilizers (HALS) and are expected to be less extractable from, and more compatible with, polystyrene and poly(methyl methacrylate) base polymers.     

Construction of recombinant Escherichia coli strais for production of poly-(3-hydroxybutyrate-co-3-hydroxyvalerate)

Plastic wastes constitute a worldwide environmental problem, and the demand for biodegradable plastics has become high. One of the most important characteristics of microbial polyesters is that they are thermoplastic with environmentally degradable properties. In this study, pUC 19/PHA was cloned and transformed into three different Escherichia coli strains. Among the three strains that were successfully expressed in the production of polyhydroxyalkanoates (PHA), E. coli HMS174 had the highest yield in the production of poly-(3-hydroxybutyrate-co-3-hydroxyvalerate) (P[HB-HV]). The cell dry weight and PHA content of recombinant HMS174 reached as high as 10.27 g/L and 43% (w/w), respectively, in fed-batch fermentor culture. The copolymer of PHA, P(HB-HV), was found in the cells, and the biopolymers accumulated were identified and analyzed by gas chromatography, proton nuclear magnetic resonance spectroscopy, and differential scanning calorimetry. We demonstrated clearly that the E. coli host for PHA production has to be carefully selected to obtain a high yield. The results obtained indicated that a superior E. coli with high PHA production can be constructed with a desirable ratio of P(HB-HV), which has potential applications in industry and medicine.     

The dithianyl group as a synthon in porphyrin chemistry: condensation reactions and preparation of formylporphyrins under basic conditions

Vilsmeier formylation is one of the most widely used substitution reactions for the functionalization of porphyrins. However, its utility is limited by the electrophilic/acidic reaction conditions, deactivation of the aromatic system and regiochemical problems, the requirement for metal complexes and necessity for subsequent demetalation under harsh conditions, and low functional group tolerance. To overcome these limitations, the dithianyl group has been utilized as a latent formyl synthon in porphyrin chemistry. 2-Formyl-1,3-dithiane can be used directly in pyrrole condensation reactions to regioselectively yield porphyrins with up to four dithianyl residues. Likewise, 5-dithianyldipyrromethane could be prepared quantitatively as a key building block for various porphyrin condensation reactions yielding the respective free base formylporphyrins after deprotection. Additionally, dithianyllithium can be used as a reagent for the direct aromatic substitution of metallo- and free base porphyrins under nucleophilic conditions.     

Regulation of plastic from a circular economy perspective

1. Download : Download high-res image (101KB)
2. Download : Download full-size image