Stability of the gold/silica thin film interface: electrochemical and surface plasmon resonance studies

This article reports chemical stability studies of a gold film electrode coated with thin silicon oxide (SiOx) layers using electrochemical, surface plasmon resonance (SPR) and atomic force microscopy (AFM) techniques. Silica films with different thicknesses (d = 6.4, 9.7, 14.5, and 18.5 nm) were deposited using a plasma-enhanced chemical vapor deposition technique (PECVD). For SiOx films with d >/= 18.5 nm, the electrochemical behavior is characteristic of a highly efficient barrier for a redox probe. SiOx films with thicknesses between 9.5 and 14.5 nm were found to be less efficient barriers for electron transfer. The Au/SiOx interface with 6.4 nm of SiOx, however, showed an enhanced steady-state current compared to that of the other films. The stability of this interface in solutions of different pH was investigated. Whereas a strongly basic solution led to a continuous dissolution of the SiOx interface, acidic treatment produced a more reticulated SiOx film and improved electrochemical behavior. The electrochemical results were corroborated by SPR measurements in real time and AFM studies.     

ℋ︁‐LU factorization in preconditioners for augmented Lagrangian and grad‐div stabilized saddle point systems

The (mixed finite element) discretization of the linearized Navier–Stokes equations leads to a linear system of equations of saddle point type. The iterative solution of this linear system requires the construction of suitable preconditioners, especially in the case of high Reynolds numbers. In the past, a stabilizing approach has been suggested which does not change the exact solution but influences the accuracy of the discrete solution as well as the effectiveness of iterative solvers. This stabilization technique can be performed on the continuous side before the discretization, where it is known as ‘grad‐div’ (GD) stabilization, as well as on the discrete side where it is known as an ‘augmented Lagrangian’ (AL) technique (and does not change the discrete solution). In this paper, we study the applicability of ??‐LU factorizations to solve the arising subproblems in the different variants of stabilized saddle point systems. We consider both the saddle point systems that arise from the stabilization in the continuous as well as on the discrete setting. Recently, a modified AL preconditioner has been proposed for the system resulting from the discrete stabilization. We provide a straightforward generalization of this approach to the GD stabilization. We conclude the paper with numerical tests for a variety of problems to illustrate the behavior of the considered preconditioners as well as the suitability of ??‐LU factorization in the preconditioners. Copyright © 2010 John Wiley & Sons, Ltd.     

Decarboxylation of α-Amino Acids Containing Two and Three Stereogenic Centers: A Simple One-Step Procedure to Prepare two Optically Active β-Amino Alcohols and a Bicyclic Pyrrolidine Derivative

The decarboxylation of L-threonine (2S,3R)-1, L-hydroxyproline (2S,4R)-2 and D-2-azabicyclo[3.3.0]octan-3-carboxylic acid (1R,3R,5R)-5 yield in a simple one-step procedure the corresponding optically active β-amino alcohols (R)-3 and (R)-4 and the bicyclic pyrrolidine derivative (1R,5R)-6 in 72–82% yield and >99% ee.     

Clickable report tags for identification of modified peptides by mass spectrometry

The identification and quantification of modified peptides are critical for the functional characterization of post-translational protein modifications (PTMs) to elucidate their biological function. Nowadays, quantitative mass spectrometry coupled with various bioinformatic pipelines has been successfully used for the determination of a wide range of PTMs. However, direct characterization of low abundant protein PTMs in bottom-up proteomic workflow remains challenging. Here, we present the synthesis and evaluation of tandem mass spectrometry tags (TMT) which are introduced via click-chemistry into peptides bearing alkyne handles. The fragmentation properties of the two mass tags were validated and used for screening in a model system and analysis of AMPylated proteins. The presented tags provide a valuable tool for diagnostic peak generation to increase confidence in the identification of modified peptides and potentially for direct peptide-PTM quantification from various experimental conditions.     

Acrylation of biomass: A review of synthesis process: Know-how and future application directions

Over the years, eco-friendly raw biomass is being investigated to develop novel green monomer and oligomer components for sustainable polymer materials synthesis. The use of naturally obtained biomass can reduce the dependence on petrochemical suppliers and the impact of petroleum prices. Polymer materials obtained from biomass are a competitive alternative comparing with those made from petrochemicals. Domestically and industrially used vegetable oil derivatives are considered widely available, while cellulose derivatives are the most abundant natural polymers. Biobased acrylic polymers developed from vegetable oils and cellulose are very popular nowadays. Using acrylic derivatives of vegetable oils and cellulose as naturally obtained materials leads to long-lasting biopolymers with a wide range of high exploitation properties and applications. The characteristics of vegetable oil- and cellulose-based acrylate resins of high-biorenewable carbon content are suitable for industrial application, while their role is still underestimated. A brief analysis of biomass-derived biopolymer resin compositions, properties, and applications is critically outlined herein.     

Frequency-selective quantitation of short-echo time 1H magnetic resonance spectra

Accurate and efficient filtering techniques are required to suppress large nuisance components present in short-echo time magnetic resonance (MR) spectra. This paper discusses two powerful filtering techniques used in long-echo time MR spectral quantitation, the maximum-phase FIR filter (MP-FIR) and the Hankel-Lanczos Singular Value Decomposition with Partial ReOrthogonalization (HLSVD-PRO), and shows that they can be applied to their more complex short-echo time spectral counterparts. Both filters are validated and compared through extensive simulations. Their properties are discussed. In particular, the capability of MP-FIR for dealing with macromolecular components is emphasized. Although this property does not make a large difference for long-echo time MR spectra, it can be important when quantifying short-echo time spectra.     

Selective Uptake of Cylindrical Poly(2‐Oxazoline) Brush‐AntiDEC205 Antibody‐OVA Antigen Conjugates into DEC‐Positive Dendritic Cells and Subsequent T‐Cell Activation

To achieve specific cell targeting by various receptors for oligosaccharides or antibodies, a carrier must not be taken up by any of the very many different cells and needs functional groups prone to clean conjugation chemistry to derive well‐defined structures with a high biological specificity. A polymeric nanocarrier is presented that consists of a cylindrical brush polymer with poly‐2‐oxazoline side chains carrying an azide functional group on each of the many side chain ends. After click conjugation of dye and an anti‐DEC205 antibody to the periphery of the cylindrical brush polymer, antibody‐mediated specific binding and uptake into DEC205⁺‐positive mouse bone marrow‐derived dendritic cells (BMDC) was observed, whereas binding and uptake by DEC205^? negative BMDC and non‐DC was essentially absent. Additional conjugation of an antigen peptide yielded a multifunctional polymer structure with a much stronger antigen‐specific T‐cell stimulatory capacity of pretreated BMDC than application of antigen or polymer–antigen conjugate.     

Formation of a Single-Crystal Aluminum-Based MOF Nanowire with Graphene Oxide Nanoscrolls as Structure-Directing Agents

An innovative strategy is proposed to synthesize single-crystal nanowires (NWs) of the Al³⁺ dicarboxylate MIL-69(Al) MOF by using graphene oxide nanoscrolls as structure-directing agents. MIL-69(Al) NWs with an average diameter of 70±20 nm and lengths up to 2 μm were found to preferentially grow along the [001] crystallographic direction. Advanced characterization methods (electron diffraction, TEM, STEM-HAADF, SEM, XPS) and molecular modeling revealed the mechanism of formation of MIL-69(Al) NWs involving size-confinement and templating effects. The formation of MIL-69(Al) seeds and the self-scroll of GO sheets followed by the anisotropic growth of MIL-69(Al) crystals are mediated by specific GO sheets/MOF interactions. This study delivers an unprecedented approach to control the design of 1D MOF nanostructures and superstructures.     

Enzymatic Building-Block Synthesis for Solid-Phase Automated Glycan Assembly

Automated chemical oligosaccharide synthesis is an attractive concept that has been successfully applied to a large number of target structures, but requires excess quantities of suitably protected and activated building blocks. Herein we demonstrate the use of biocatalysis to supply such reagents for automated synthesis. By using the promiscuous NmLgtB-B β1-4 galactosyltransferase from Neisseria meningitidis we demonstrate fast and robust access to the LacNAc motif, common to many cell-surface glycans, starting from either lactose or sucrose as glycosyl donors. The enzymatic product was shown to be successfully incorporated as a complete unit into a tetrasaccharide target by automated assembly.