Towards stationary phases for chromatography on a microchip: molded porous polymer monoliths prepared in capillaries by photoinitiated in situ polymerization as separation media for electrochromatography

Photoinitiated free radical polymerization has been used for the preparation of porous polymer monoliths within UV transparent fused silica capillaries and quartz tubes. These formats were used as models for the preparation of the separation media within channels of microfabricated devices. A mixture of ethylene dimethacrylate, butyl methacrylate, and 2-acrylamido-2-methyl-1-propanesulfonic acid was polymerized in the presence of a porogenic solvent consisting of 1-propanol, 1,4-butanediol, and water at room temperature under UV irradiation. Modification of the porogen composition enables the tailoring of pore size within the broad range from ca. 100 to 4000 nm. Scanning electron micrographs confirmed the homogeneity of the porous structure of the materials prepared, even in a quartz tube with a diameter as large as 4 mm. Separation properties of the resulting capillary columns were tested in capillary electrochromatography (CEC) mode using a mixture of thiourea and eight aromatic compounds. Plate number as high as 210 000 plates/m were found for a capillary column with optimized porous properties. The monolithic columns were also able to separate mixtures of peptides.     

Stereoselective hydroxylation of an achiral cyclopentanecarboxylic acid derivative using engineered P450s BM-3

Substrate engineered, achiral carboxylic acid derivative was biohydroxylated with various mutants of cytochrome P450 BM-3 to give two out of the four possible diastereoisomers in high de and ee. The BM-3 mutants exhibit up to 9200 total turnovers for hydroxylation of the engineered substrate, which without the protecting group is not transformed by this enzyme.     

Formation and reactions of metal-metal bonded heterobimetallic (C5H4PR2)-bridged (Zr-Ir) and (Zr-Rh) complexes: evidence for the participation of metal hydride intermediates

Treatment of the complexes [(C(5)H(4)PR(2))(2)Zr(CH(3))(2)](b: R = isopropyl; c: R = cyclohexyl) with the reagent HIr(CO)(PPh(3))(3) (2b) yield the heterobimetallic complexes [mu-C(5)H(4)PR(2))(2)(H(3)C-Zr-Ir(CO)(PPh(3)))] (4b, 4c) with evolution of methane. The reaction of the -PPh(2) substituted analogue with initially yields an intermediate [(H(3)C)(2)Zr(mu-C(5)H(4)PPh(2))(2)Ir(H)(CO)(PPh(3))] 5a, that still contains both methyl groups at zirconium and does not contain a metal-metal bond. At room temperature, the intermediate reacts further with methane formation to eventually yield the (Zr-Ir) complex 4a. The corresponding [mu-C(5)H(4)PR(2))(2)(H(3)C-Zr-Rh(CO)(PPh(3)))] complexes 3a (R = Ph) and 3b (R = isopropyl) react cleanly with isopropyl alcohol to liberate methane and yield the corresponding [mu-C(5)H(4)PR(2))(2)(Me(2)CHO-Zr-Rh(CO)(PPh(3)))] products (7a, 7b). Carefully monitoring the reaction of with Me(2)CHOH by NMR revealed that the Zr-Rh functionality is attacked first to give the intermediate [Me(Me(2)CHO)Zr([micro sign]-C(5)H(4)PR(2))(2)Rh(H)(CO)(PPh(3))] (6b). This intermediate then reacts further to cleave off methane and re-form the (Zr-Rh) metal-metal bond to yield the product 7b. The tetrametallic mu-oxo-(Zr-Rh) metallocene derivate 11a was obtained starting from the (Zr-Rh) complex 3a and it was characterized by X-ray diffraction. It may be that this reaction is also initiated by H-OH addition to the [Zr-Rh] metal-metal bond.     

Photolithographically patternable nitrate-sensitive acrylate-based membrane

A photocurable acrylate matrix nitrate-sensitive membrane containing 2-nitrophenyl n-octyl ether as mediator and tetraalkylammonium nitrate as an active compound is described. The photocuring was achieved by the use of photoinitiators containing diaryliodonium chloride. This acrylate membrane is patternable via a photolithographic process with a only slight loss of electrochemical characteristics.     

In vitro nitrosation of ephedrine in the presence of cyclodextrins

-, and -cyclodextrin and heptakis-2,6-di-O-methyl--cyclodextrin enhance the nitrosation rate of l-ephedrine if the nitrosation assay procedure (NAP test) is applied. During this reaction with -cyclodextrin a solid inclusion compound of -cyclodextrin andN-nitrosoephedrine precipitates. Solubilities and stabilities of inclusion compounds of the cyclodextrins with ephedrine and nitrosoephedrine, respectively, explain especially the catalytic effects of some cyclodextrins on ephedrine.Part of the PhD thesis of V. Wedelich, Freie Universität Berlin, 1985.     

The dithianyl group as a synthon in porphyrin chemistry: condensation reactions and preparation of formylporphyrins under basic conditions

Vilsmeier formylation is one of the most widely used substitution reactions for the functionalization of porphyrins. However, its utility is limited by the electrophilic/acidic reaction conditions, deactivation of the aromatic system and regiochemical problems, the requirement for metal complexes and necessity for subsequent demetalation under harsh conditions, and low functional group tolerance. To overcome these limitations, the dithianyl group has been utilized as a latent formyl synthon in porphyrin chemistry. 2-Formyl-1,3-dithiane can be used directly in pyrrole condensation reactions to regioselectively yield porphyrins with up to four dithianyl residues. Likewise, 5-dithianyldipyrromethane could be prepared quantitatively as a key building block for various porphyrin condensation reactions yielding the respective free base formylporphyrins after deprotection. Additionally, dithianyllithium can be used as a reagent for the direct aromatic substitution of metallo- and free base porphyrins under nucleophilic conditions.     

Structural-chemical disorder of manganese dioxides 1. Influence on surface properties at the solid-electrolyte interface

Relationships between lattice parameters of manganese dioxides and their surface properties at the solid-aqueous solution interface were investigated. The studied series ranged from ramsdellite to pyrolusite and encompassed disordered MD samples. The structural model used takes into account structural defects: Pr (rate of pyrolusite intergrowth) and Tw (rate of microtwinning). Water adsorption isotherms showed that the cross sectional area of water molecules adsorbed in the first monolayer is positively correlated to Pr. Titration of the surface charge of the MD series evidenced a positive linear relationship between the PZC and Pr (Pr=0, Tw=0, PZC=1 for ramsdellite; Pr=1, Tw=0, PZC=7.3 for pyrolusite; gamma-MD with intermediate values of Pr (0.2 to 0.45) have increasing PZC values). The rate of microtwinning appeared as a secondary factor for the increase of the PZC. The above correlations are explained by the chemical defects at the origin of the structural disorder, respectively Mn(3+)/Mn4+ substitution for Pr and Mn vacancies for Tw, which result in proton affinity and thus in increased PZC. The experimental results are compared with data collected in the literature for manganese dioxides as well as for dioxides of transition elements with tetragonal structure.     

Regulation of plastic from a circular economy perspective

1. Download : Download high-res image (101KB)
2. Download : Download full-size image

     

Synthesis of new derivatives of 4-amino-2,4-dihydro-1,2,4-triazol-3-one as potential antibacterial agents

Thirty new 2-substituted-4-amino-5-alkyl or aryl-2,4-dihydro-1,2,4-triazol-3-ones and ten 2-substituted-5-alkyl or aryl-4-(5-nitro-2-furfurylidene)amino-2,4-dihydro-1,2,4-triazol-3-ones were synthesized and characterised by their sharp melting points, elemental analysis, ir and ¹H nmr spectra. These new derivatives of 5-nitro-2-furaldehyde were screened for their antibacterial activities. Most of the compounds showed good activity against one test organism, Staphylococcus aureus. For a few compounds, C.M.I. ranged from 4 to 8 μg/ml (higher results than nitrofurantoin).