HPLC-separation of cis and trans monounsaturated fatty acids

Summary The chromatography of monounsaturated fatty acids as their methyl esters on silver nitrate-loaded HPLC-columns has been studied. The separation of cis- and trans-isomers was easily achieved even with columns of low performance. High-performance small-particle-columns treated with silver nitrate separated a large variety of monounsaturated cis and trans positional isomers. The influence of variable silver-loads on the selectivity of the system was studied and a survey of the distribution of positional trans C₁₈₁ isomers in commercial margarines is given.     

Design of organic semiconductors: tuning the electronic properties of pi-conjugated oligothiophenes with the 3,4-ethylenedioxythiophene (EDOT) building block

Hybrid oligothiophenes based on a various combinations of thiophene and 3,4-ethylenedioxythiophene (EDOT) groups have been synthesized. UV/Vis absorption spectra show that the number and relative positions of the EDOT groups considerably affect the width of the HOMO-LUMO gap and the rigidity of the conjugated system. Analysis of the crystallographic structure of two hybrid quaterthiophenes confirms that insertion of two adjacent EDOT units in the middle of the molecule leads to a self-rigidification of the conjugated systems by intramolecular SO interactions. Cyclic voltammetry data shows that the first oxidation potential of the oligomers decreases with increasing chain length and increasing number of EDOT groups for a given chain length. Electrochemical studies and theoretical calculations show that the positions of the EDOT units in the conjugated chain control the potential difference (DeltaE(p)) between the first and second oxidation steps. Moving the EDOT groups from the outer to the inner positions of the conjugated system increases DeltaE(p). Theoretical calculations confirm that this phenomenon reflects an increase of the intramolecular coulombic repulsion between positive charges in the dication. A thin-film field-effect transistor was fabricated by vacuum sublimation of a pentamer with alternating thiophene-EDOT structure, and the hole mobility was determined.     

An efficient synthetic route to glycoamino acid building blocks for glycopeptide synthesis

[reaction: see text] Chemical glycopeptide synthesis requires access to gram quantities of glycosylated amino acid building blocks. Hence, the efficiency of synthesis of such building blocks is of great importance. Here, we report a fast and highly efficient synthetic route to Fmoc-protected asparaginyl glycosides from unprotected sugars in three steps with high yields. The glycosylated amino acids were successfully incorporated into target glycopeptides 7 and 8 by standard Fmoc solid-phase peptide synthesis.     

Multiplexed hybridizations of positively charge-tagged peptide nucleic acids detected by matrix-assisted laser desorption/ionization time-of-flight mass spectrometry

Peptide nucleic acid (PNA) is a novel class of DNA analogues in which the entire sugar-phosphate backbone is replaced by a pseudopeptide counterpart. Owing to its neutral character and the consequent lack of electrostatic repulsion, PNA exhibits very stable heteroduplex formation with complementary nucleic acid that is essentially ionic strength independent and enables hybridization under minimum salt conditions. This feature as well as its superior ion stability and easy ionization compared to DNA renders PNA very attractive for hybridization-based matrix-assisted laser desorption/ionization time-of-flight mass spectrometry (MALDI-TOFMS) applications. We have developed an approach to DNA characterization that takes advantage of multiplexed PNA hybridizations analyzed by MALDI-TOFMS. Our motivation was the further development of oligonucleotide fingerprinting, an efficient technique for cDNA and genomic DNA library characterization. Through positive 'charge-tagging' of PNA the efficiency of detection in MALDI-TOFMS was considerably enhanced permitting an unparalleled degree of multiplexing. Results from the simultaneous hybridization of 21 charge-tagged PNA hexamer oligonucleotides showed that genomic DNA and cDNA clones are successfully characterized on the basis of their hybridization profiles. The degree of multiplexing achieved may render a significant increase in throughput and hence efficiency of oligonucleotide fingerprinting possible.     

Two-stage Off-Gel isoelectric focusing: protein followed by peptide fractionation and application to proteome analysis of human plasma

This paper presents the recently introduced Off-Gel electrophoresis (OGE) technology as a versatile tool to reproducibly fractionate intact proteins and peptides into discrete liquid fractions. The coupling of two stages of OGE, i.e., the separation of intact proteins in a first-stage followed by fractionation of peptides derived from each protein fraction after proteolysis in a second stage, results in an array of 15 x 15 fractions that are directly amenable to additional peptide fractionation like reverse-phase liquid chromatography (RPC). The analysis of all second-stage peptide fractions from only the first-stage protein fraction representing pH 5.0 -5.15 by on-line reverse-phase LC-tandem mass spectrometry resulted in the identification of 53 proteins (337 peptides), of which 10 were on different immunoglobulin (Ig) chains, with an input of only 1.5 mg human blood plasma proteins. Increasing the protein load to approximately 12 mg increased the number of identified proteins in the same protein fraction to 73 proteins (449 peptides), of which 15 were Ig-related. Immunodepletion of six of the most abundant proteins (albumin, transferrin, haptoglobin, IgG, IgA, and alpha-1-antitrypsin) prior to first-stage OGE with an input of 1.5 mg of protein (equivalent to approximately 10 mg nondepleted plasma) resulted in the identification of 81 proteins (660 peptides), of which three were still Ig fragments. The pI-based separation of peptides appears to be nonuniform based on the theoretically determined pI values of identified peptides. This observation specifically accounts for the neutral zone (pI 5-8) and can be accounted for by the physicochemical properties of the peptides given by their amino acid composition. The power of OGE separation of proteins and peptides is discussed with a focus on the use of the knowledge about the pI of proteins and peptides that assist the validation of correct identifications together with the retention time of peptides on RPC.     

Synthesis and characterization of Mo(6) chalcobromides and cyano-substituted compounds built from a novel [(Mo(6)Br(i)(6)Y(i)(2))L(a)(6)](n)()(-) discrete cluster unit (Y(i) = S or Se and L(a) = Br or CN)

The syntheses, crystal structures determined by single-crystal X-ray diffraction, and characterizations of new Mo(6) cluster chalcobromides and cyano-substituted compounds with 24 valence electrons per Mo(6) cluster (VEC = 24), are presented in this work. The structures of Cs(4)Mo(6)Br(12)S(2) and Cs(4)Mo(6)Br(12)Se(2) prepared by solid state routes are based on the novel [(Mo(6)Br(i)(6)Y(i)(2))Br(a)(6)](4)(-) (Y = S, Se) discrete units in which two chalcogen and six bromine ligands randomly occupy the inner positions, while the six apical ones are fully occupied by bromine atoms. The interaction of these two compounds with aqueous KCN solution results in apical ligand exchange giving the two first Mo(6) cyano-chalcohalides: Cs(0.4)K(0.6)(Et(4)N)(11)[(Mo(6)Br(6)S(2))(CN)(6)](3).16H(2)O and Cs(0.4)K(0.6)(Et(4)N)(11)[(Mo(6)Br(6)Se(2))(CN)(6)](3).16H(2)O. Their crystal structures, built from the original [(Mo(6)Br(i)(6)Y(i)(2))(CN)(a)(6)](4)(-) discrete units, will be compared to those of the two solid state precursors and other previously reported Mo(6) cluster compounds. Their redox properties and (77)Se NMR characterizations will be presented. Crystal data: Cs(4)Mo(6)Br(12)S(2), orthorhombic, Pbca (No. 61), a = 11.511(5) A, b = 18.772(5) A, c = 28.381 A (5), Z = 8; Cs(4)Mo(6)Br(12)Se(2), Pbca (No. 61), a = 11.6237(1) A, b = 18.9447(1) A, c = 28.4874(1) A, Z = 8; Cs(0.4)K(0.6)(Et(4)N)(11)[(Mo(6)Br(6)S(2))(CN)(6)](3).16H(2)O, Pm-3m (No. 221), a = 17.1969(4) A, Z = 1; Cs(0.4)K(0.6)(Et(4)N)(11)[(Mo(6)Br(6)Se(2))(CN)(6)](3).16H(2)O, Pm-3m (No. 221), a = 17.235(5) A, Z = 1.     

Oxygen-flask combustion of accumulated organophosphorus pesticides for monitoring water pollution

A procedure is described for the determination of the total concentration of organophosphorus pesticides in aqueous solution based on conversion of the compounds to orthophosphoric acid by oxygen-flask combustion and spectrophotometric determination as phosphomolybdenum blue. The procedure is particularly sensitive when preceded by efficient and selective accumulation of pesticides. The adsorption of malathion, parathion and phosalone on Amberlite XAD-4 resin from 1 l of 7–36 μM water solutions, followed by combustion of 500 μl of eluate yields of orthophosphoric acid with 90–105% recoveries. The detection limit is ca. 150 ng ml^?1 pesticide in an aqueous sample. Inorganic phosphates and most of some commonly present non-pesticide phosphorus compounds are eliminated from the water sample during the adsorption step. In combination with a test for monitoring traces of cholinesterase inhibitors in surface waters, the determination of the total amount of organophosphorus pesticides as a cumulative parameter offers reliable information on the pollution level of the water environment. Application of such a combined procedure to a pond water from an apple orchard showed good correlation between phosphrus content and the cholinesterase inhibition.     

Poly(ethyleneimine) as reducing and stabilizing agent for the formation of gold nanoparticles in w/o microemulsions

This paper is focused on the use of branched poly(ethyleneimine) (PEI) as reducing as well as stabilizing agent for the formation of gold nanoparticles in different media. The process of nanoparticle formation was investigated, in the absence of any other reducing agents, in microemulsion template phase in comparison to the nucleation process in aqueous polymer solution.

On the one hand, it was shown that the polyelectrolyte can be used for the controlled single-step synthesis and stabilization of gold nanoparticles via a nucleation reaction and particles with an average diameter of 7.1 nm can be produced.

On the other hand, it was demonstrated that the polymer can also act as reducing and stabilizing agent in much more complex systems, i.e. in water-in-oil (w/o) microemulsion droplets. The reverse microemulsion droplets of the quaternary system sodium dodecylsulfate (SDS)/toluene–pentanol (1:1)/water were successfully used for the synthesis of gold nanoparticles. The polymer, incorporated in the droplets, exhibits reducing properties, adsorbs on the surface of the nanoparticles and prevents their aggregation. Consequently, nanoparticles of 8.6 nm can be redispersed after solvent evaporation without a change of their size.

Nevertheless, the polymer acts already as a “template” during the formation of the nanoparticles in water and in microemulsion, so that an additional template effect of the microemulsion is not observed.

The particle formation for both methods is checked by means of UV–vis spectroscopy and the particle size and size distribution are investigated via dynamic light scattering and transmission electron microscopy (TEM).     

Triplex and quadruplex DNA structures studied by electrospray mass spectrometry

DNA triplex and quadruplex structures have been successfully detected by electrospray ionization mass spectrometry (ESI-MS). Circular dichroism and UV-melting experiments show that these structures are stable in 150 mM ammonium acetate at pH 7 for the quadruplexes and pH 5.5 for the triplexes. The studied quadruplexes were the tetramer [d(TGGGGT)](4), the dimer [d(GGGGTTTTGGGG)](2), and the intramolecular folded strand dGGG(TTAGGG)(3), which is an analog of the human telomeric sequence. The absence of sodium contamination allowed demonstration of the specific inclusion of n - 1 ammonium cations in the quadruplex structures, where n is the number of consecutive G-tetrads. We also detected the complexes between the quadruplexes and the quadruplex-specific drug mesoporphyrin IX. MS/MS spectra of [d(TGGGGT)](4) and the complex with the drug are also reported. As the drug does not displace the ammonium cations, one can conclude that the drug binds at the exterior of the tetrads, and not between them. For the triplex structure the ESI-MS spectra show the detection of the specific triplex, at m/z values typically higher than those typically observed for duplex species. Upon MS/MS the antigene strand, which is bound into the major groove of the duplex, separates from the triplex. This is the same dissociation pathway as in solution. To our knowledge this is the first report of a triplex DNA structure by electrospray mass spectrometry.     

Mechanical Properties of Organic-Inorganic Hybrid Materials Determined by Indentation Techniques

The mechanical properties of hybrid materials consisting of polystyrene (PS), which was cross-linked with different proportions of the multifunctional cluster Zr₆O₄(OH)₄(methacrylate)₁₂ (Zr6) were investigated. With the help of (micro)indentation and scratch testing, the influence of the Zr6 clusters on mechanical properties, such as hardness, stiffness, creep, craze initiation, and scratch resistance was shown. There was only a slight increase in hardness and in indentation modulus with higher cluster loadings. While this observation was in agreement with the compression behaviour of the materials, the tensile properties showed a much stronger dependence on the Zr6 content. With increasing cluster loading, an increase of craze initiation stress, as determined by ball indentation experiments, was found. Performing scratch testing with constant load, a reduction of pile-up and a stronger recovery were observed for the hybrid materials compared to the neat PS. Scratch tests with a constant increase of load showed an increase of the critical load for crack opening during scratching.