Poly(ethyleneimine) as reducing and stabilizing agent for the formation of gold nanoparticles in w/o microemulsions

This paper is focused on the use of branched poly(ethyleneimine) (PEI) as reducing as well as stabilizing agent for the formation of gold nanoparticles in different media. The process of nanoparticle formation was investigated, in the absence of any other reducing agents, in microemulsion template phase in comparison to the nucleation process in aqueous polymer solution.

On the one hand, it was shown that the polyelectrolyte can be used for the controlled single-step synthesis and stabilization of gold nanoparticles via a nucleation reaction and particles with an average diameter of 7.1 nm can be produced.

On the other hand, it was demonstrated that the polymer can also act as reducing and stabilizing agent in much more complex systems, i.e. in water-in-oil (w/o) microemulsion droplets. The reverse microemulsion droplets of the quaternary system sodium dodecylsulfate (SDS)/toluene–pentanol (1:1)/water were successfully used for the synthesis of gold nanoparticles. The polymer, incorporated in the droplets, exhibits reducing properties, adsorbs on the surface of the nanoparticles and prevents their aggregation. Consequently, nanoparticles of 8.6 nm can be redispersed after solvent evaporation without a change of their size.

Nevertheless, the polymer acts already as a “template” during the formation of the nanoparticles in water and in microemulsion, so that an additional template effect of the microemulsion is not observed.

The particle formation for both methods is checked by means of UV–vis spectroscopy and the particle size and size distribution are investigated via dynamic light scattering and transmission electron microscopy (TEM).     

Mechanical Properties of Organic-Inorganic Hybrid Materials Determined by Indentation Techniques

The mechanical properties of hybrid materials consisting of polystyrene (PS), which was cross-linked with different proportions of the multifunctional cluster Zr₆O₄(OH)₄(methacrylate)₁₂ (Zr6) were investigated. With the help of (micro)indentation and scratch testing, the influence of the Zr6 clusters on mechanical properties, such as hardness, stiffness, creep, craze initiation, and scratch resistance was shown. There was only a slight increase in hardness and in indentation modulus with higher cluster loadings. While this observation was in agreement with the compression behaviour of the materials, the tensile properties showed a much stronger dependence on the Zr6 content. With increasing cluster loading, an increase of craze initiation stress, as determined by ball indentation experiments, was found. Performing scratch testing with constant load, a reduction of pile-up and a stronger recovery were observed for the hybrid materials compared to the neat PS. Scratch tests with a constant increase of load showed an increase of the critical load for crack opening during scratching.     

A photoactivated diazopyruvoyl cross-linking agent for bonding tissue containing type-I collagen

On the basis of the earlier examples of diazopyruvoyl (DAP) groups reported by Lawton for covalent binding and cross-linking of proteins and oligopeptides and our recent demonstration that a coumaryl diazopyruvamide was used to label Type-I collagen, we have extended our investigations to the synthesis and cross-linking capabilities of a bis-DAP polyethylene glycol to cross-link Type-I collagen. The new photoactivated cross-linking agent, N,N'-bis(3-diazopyruvoyl)-2,2'-(ethylenedioxy)bis(ethylamine) (DPD, 2), has been designed and synthesized specifically to "weld" collagenous tissues by cross-linking Type-I collagen. A working model for the photochemical welding studies of collagenous tissues was developed using gelatin strips (gel strips) composed of denatured Type-I collagen. Gel strips are transparent to near-UV and visible light, uniform in thickness, and have reproducible composition. Furthermore, the availability of nucleophilic amine sites in gel strips was demonstrated by reaction with o-phthalaldehyde, producing a fluorescent derivative of the protein. Gel strips were coated with a solution of DPD in chloroform 7 irradiated at 320-390 nm, and the resulting bonded gel strips were tested for the strength of the weld. The welds were generally brittle and had average tensile strengths that exceeded 100 N/cm2. Welds were not formed in the absence of light or DPD. Scanning electron microscopy studies revealed a pockmarked surface from severed welds. Welds of rabbit Achilles tendon were also obtained using the tethered diazopyruvamide. These welds were much weaker, having an average tensile strength of 11.95 N/cm2 for DPD-2,2'-ethylenedioxy(bis)ethylamine comonomers in the cross-linking reaction. In both studies the welds obtained by this method were significantly stronger than the controls.     

Stereoselective hydroxylation of an achiral cyclopentanecarboxylic acid derivative using engineered P450s BM-3

Substrate engineered, achiral carboxylic acid derivative was biohydroxylated with various mutants of cytochrome P450 BM-3 to give two out of the four possible diastereoisomers in high de and ee. The BM-3 mutants exhibit up to 9200 total turnovers for hydroxylation of the engineered substrate, which without the protecting group is not transformed by this enzyme.     

The dithianyl group as a synthon in porphyrin chemistry: condensation reactions and preparation of formylporphyrins under basic conditions

Vilsmeier formylation is one of the most widely used substitution reactions for the functionalization of porphyrins. However, its utility is limited by the electrophilic/acidic reaction conditions, deactivation of the aromatic system and regiochemical problems, the requirement for metal complexes and necessity for subsequent demetalation under harsh conditions, and low functional group tolerance. To overcome these limitations, the dithianyl group has been utilized as a latent formyl synthon in porphyrin chemistry. 2-Formyl-1,3-dithiane can be used directly in pyrrole condensation reactions to regioselectively yield porphyrins with up to four dithianyl residues. Likewise, 5-dithianyldipyrromethane could be prepared quantitatively as a key building block for various porphyrin condensation reactions yielding the respective free base formylporphyrins after deprotection. Additionally, dithianyllithium can be used as a reagent for the direct aromatic substitution of metallo- and free base porphyrins under nucleophilic conditions.     

Regulation of plastic from a circular economy perspective

1. Download : Download high-res image (101KB)
2. Download : Download full-size image

     

Electrokinetic investigations of charged porous membranes

Asymmetric ultrafiltration membranes were prepared from fully aromatic polyamides differing in the diamine monomers of the polymeric backbone and from polysulfone. Nanofiltration membranes were made from polysulfone and polyethersulfone. The polysulfone as well as the polyethersulfone were chemically modified to change the surface charges of the membranes that were made from these polymers. This means neutral, positively as well as negatively charged membranes could be employed for the measurements. The surface properties of the membranes as a function of pH were determined by measuring the streaming potential in a perpendicular and horizontal mode. Applying proteins the values of the streaming potential changed depending on the original charges of the membranes as well as on the pH of the solution. The values shifted to either higher or lower absolute values. Thus, characterization of unused and used membranes can be carried out by electrokinetic measurements. This was also demonstrated using a membrane fitted out with invertase. The zeta potential of nanofiltration membranes, however, was only evaluated from the results obtained with the horizontally run cell.