Breath Analysis: Comparison among Methodological Approaches for Breath Sampling

Despite promising results obtained in the early diagnosis of several pathologies, breath analysis still remains an unused technique in clinical practice due to the lack of breath sampling standardized procedures able to guarantee a good repeatability and comparability of results. The most diffuse on an international scale breath sampling method uses polymeric bags, but, recently, devices named Mistral and ReCIVA, able to directly concentrate volatile organic compounds (VOCs) onto sorbent tubes, have been developed and launched on the market. In order to explore performances of these new automatic devices with respect to sampling in the polymeric bag and to study the differences in VOCs profile when whole or alveolar breath is collected and when pulmonary wash out with clean air is done, a tailored experimental design was developed. Three different breath sampling approaches were compared: (a) whole breath sampling by means of Tedlar bags, (b) the end-tidal breath collection using the Mistral sampler, and (c) the simultaneous collection of the whole and alveolar breath by using the ReCIVA. The obtained results showed that alveolar fraction of breath was relatively less affected by ambient air (AA) contaminants (p-values equal to 0.04 for Mistral and 0.002 for ReCIVA Low) with respect to whole breath (p-values equal to 0.97 for ReCIVA Whole). Compared to Tedlar bags, coherent results were obtained by using Mistral while lower VOCs levels were detected for samples (both breath and AA) collected by ReCIVA, likely due to uncorrected and fluctuating flow rates applied by this device. Finally, the analysis of all data also including data obtained by explorative analysis of the unique lung cancer (LC) breath sample showed that a clean air supply might determine a further confounding factor in breath analysis considering that lung wash-out is species-dependent.     

Physical and Sensory Properties of Japanese Quince Chips Obtained by Osmotic Dehydration in Fruit Juice Concentrates and Hybrid Drying

Japanese quince has high health value, but due to its taste and texture, it is difficult to eat raw. The use of innovative drying methods to produce dried snack foods from these fruits may be of interest to producers and consumers. The physicochemical and sensory properties of 3 mm slices of Japanese quince fruit (with skin, without seeds) obtained by osmotic pre-treatment in chokeberry and apple juice concentrates, and with the use of convection (convective drying, C-D), freeze-drying (F-D), and convection-microwave-vacuum drying (hybrid) are assessed. The methods of drying osmo-dehydrated slices do not affect the dry matter content. In most dried quince, the water activity is 0.40 or lower. Pre-osmotic dehydration and drying have a significant impact on the mechanical and acoustic properties of quince chips. Sensory attractive chips emit loud acoustic emission (AE) during the breaking test. Chips that are osmo-dehydrated in a mixture of chokeberry juice concentrate and sucrose and dried by a hybrid method are attractive. They have a dark red color given by chokeberry concentrate and a slight sweet (with a slight sour-bitter) taste. The sensory evaluation was useful for determining the quality of the chips in terms of their texture (crispness) tested by mechanical methods. Their sensory ratings (overall desirability as weight of color, taste, crispness, and flavor) are high and similar (from 3.8 to 4.1). The use of innovative drying methods with pre-osmotic treatment allows obtaining dried material with properties comparable to those obtained by the F-D method, but in a much shorter time, i.e., with lower energy and using a simple method.     

Influence of Tea Brewing Parameters on the Antioxidant Potential of Infusions and Extracts Depending on the Degree of Processing of the Leaves of Camellia sinensis

The polyphenol content of tea depends on the growing region, harvest date, the production process used, and the brewing parameters. In this study, research was undertaken that included an analysis of the influence of the brewing process parameters on the content of total polyphenols (Folin-Ciocalteu), epigallocatechin gallate (HPLC), and antioxidant activity (against DPPH radicals) of fresh tea shrub leaves grown from Taiwan and of teas obtained from them (oolong, green in bags, and green loose from the spring and autumn harvest). The antioxidant potential was determined in the methanol and aqueous extracts, as well as in infusions that were obtained by using water at 65 or 100 °C and infusing the tea for 5 or 10 min. The highest content of total polyphenols and epigallocatechin gallate was found in green tea extracts from the spring harvest. However, in the case of infusions, the highest content of these compounds was found in green tea in bags. Steaming at 100 °C for 10 min, turned out to be the most favourable condition for the extraction. Oolong tea, brewed at 100 °C for 5 min was characterised by the highest antioxidant activity against stable DPPH radicals.     

Evaluating the Conservation State of Naturally Aged Paper with Raman and Luminescence Spectral Mapping: Toward a Non-Destructive Diagnostic Protocol

Micro-Raman and luminescence spectroscopy were combined with morphological analysis to study the conservation state of differently degraded paper samples, dated from 1873 to 2021. The aim of the work reported in this paper was to obtain ageing markers based on variations of Raman and fluorescence spectral features. Raman and luminescence spectra were acquired by scanning non-printed areas of books, and Raman and fluorescence maps were built by contrasting spectral parameters point by point, obtaining a micron-scale space resolved imaging of the degradation pattern. Complementary information on paper morphology and surface compactness were obtained by high-resolution scanning electron and atomic force microscopy. The proposed non-destructive procedure is particularly interesting for precious and ancient samples to analyze their degradation processes and to evaluate the performance and effectiveness of restoration treatments.     

Effective elastic shear stiffness of a periodic fibrous composite with non-uniform imperfect contact between the matrix and the fibers

In this contribution, effective elastic moduli are obtained by means of the asymptotic homogenization method, for oblique two-phase fibrous periodic composites with non-uniform imperfect contact conditions at the interface. This work is an extension of previous reported results, where only the perfect contact for elastic or piezoelectric composites under imperfect spring model was considered. The constituents of the composites exhibit transversely isotropic properties. A doubly periodic parallelogram array of cylindrical inclusions under longitudinal shear is considered. The behavior of the shear elastic coefficient for different geometry arrays related to the angle of the cell is studied. As validation of the present method, some numerical examples and comparisons with theoretical results verified that the present model is efficient for the analysis of composites with presence of imperfect interface and parallelogram cell. The effect of the non uniform imperfection on the shear effective property is observed. The present method can provide benchmark results for other numerical and approximate methods.     

Cationic calix[4]arenes as anion-selective ionophores

1,3-Alternate cationic calix[4]arene proved highly selective for proton/halogens symport transport and showed antiproliferative activity against murine monocyte/macrophage J774.A1 cancer cells.     

Conformation of ionizable poly Para phenylene ethynylene in dilute solutions

The conformation of dinonyl poly para phenylene ethynylenes (PPEs) with carboxylate side chains, equilibrated in solvents of different quality have been studied using molecular dynamics simulations. PPEs are of interest because of their tunable electro‐optical properties, chemical diversity, and functionality which are essential in wide range of applications. The polymer conformation determines the conjugation length and their assembly mode and affects electro‐optical properties which are critical in current and potential uses. This study investigates the effect of carboxylate fraction on PPEs side chains on the conformation of chains in the dilute limit, in solvents of different quality. The dinonyl PPE chains are modeled atomistically, where the solvents are modeled both implicitly and explicitly. Dinonyl PPEs maintained a stretched out conformation up to a carboxylate fraction f of 0.7 in all solvents studied. The nonyl side chains are extended and oriented away from the PPE backbone in toluene and in implicit good solvent, whereas in water and implicit poor solvent, the nonyl side chains are collapsed toward the PPE backbone. Rotation around the aromatic ring is fast and no long range correlations are seen within the backbone. © 2015 Wiley Periodicals, Inc. J. Polym. Sci., Part B: Polym. Phys. 2016 , 54, 582–588     

5-Hydroxy-pyrrolone based building blocks as maleimide alternatives for protein bioconjugation and single-site multi-functionalization

Recent dramatic expansion in potential uses of protein conjugates has fueled the development of a wide range of protein modification methods; however, the desirable single-site multi-functionalization of proteins has remained a particularly intransigent challenge. Herein, we present the application of 5-hydroxy-1,5-dihydro-2H-pyrrol-2-ones (5HP2Os) as advantageous alternatives to widely used maleimides for the chemo- and site-selective labeling of cysteine residues within proteins. A variety of 5HP2O building blocks have been synthesized using a one-pot photooxidation reaction starting from simple and readily accessible furans and using visible light and oxygen. These novel reagents display excellent cysteine selectivity and also yield thiol conjugates with superior stability. 5HP2O building blocks offer a unique opportunity to introduce multiple new functionalities into a protein at a single site and in a single step, thus, significantly enhancing the resultant conjugate''s properties.

Recent expansion in potential uses of protein conjugates has fueled the development of a range of protein modification methods; however, the desirable single-site multi-functionalization of proteins has remained a particularly intransigent challenge.