Failure of the Ingard-Myers boundary condition for a lined duct: an experimental investigation

This paper deals with experimental investigation of the lined wall boundary condition in flow duct applications such as aircraft engine systems or automobile mufflers. A first experiment, based on a microphone array located in the liner test section, is carried out in order to extract the axial wavenumbers with the help of an "high-accurate" singular value decomposition Prony-like algorithm. The experimental axial wavenumbers are then used to provide the lined wall impedance for both downstream and upstream acoustic propagation by means of a straightforward impedance education method involving the classical Ingard-Myers boundary condition. The results show that the Ingard-Myers boundary condition fails to predict with accuracy the acoustic behavior in a lined duct with flow. An effective lined wall impedance, valid whatever the direction of acoustic propagation, can be suitably found from experimental axial wavenumbers and a modified version of the Ingard-Myers condition with the form inspired from a previous theoretical study [Aure?gan et al., J. Acoust. Soc. Am. 109, 59-64 (2001)]. In a second experiment, the scattering matrix of the liner test section is measured and is then compared to the predicted scattering matrix using the multimodal approach and the lined wall impedances previously deduced. A large discrepancy is observed between the measured and the predicted scattering coefficients that confirms the poor accuracy provided from the Ingard-Myers boundary condition widely used in lined duct applications.     

Simultaneous bidirectional message transmission in a chaos-based communication scheme

We introduce a chaos-based communication scheme allowing for bidirectional exchange of information. Coupling [corrected] two semiconductor lasers through a partially transparent optical mirror, placed in the pathway connecting the lasers [corrected] delay dynamics is induced in both lasers. We numerically demonstrate that this dynamics can be identically synchronized, and moreover, information introduced on both ends of the link can be simultaneously transmitted. This scheme allows one to negotiate a key through a public channel.     

Highly dispersive large mode area photonic bandgap fiber

An all-silica photonic bandgap fiber composed of a low-index core surrounded by alternating high- and low-index rings allows us to achieve a large mode area (500 microm(2)) and large chromatic dispersion. Sharp resonances from the even Bragg mode to odd ring modes theoretically lead to 20,000 ps/(nm km) chromatic dispersion when large bends are applied. By nature, sharp resonances are sensitive to inhomogeneities along the fiber length. Under experimental conditions, the resonances are broadened and the dispersion coefficient is decreased to 1000 ps/(nm km). However, to the best of our knowledge, this is the largest dispersion coefficient reported using a large mode area fiber.     

Preparation of activated carbon from a renewable bio-plant of Euphorbia rigida by H2SO4 activation and its adsorption behavior in aqueous solutions

The use of activated carbon obtained from Euphorbia rigida for the removal of a basic textile dye, which is methylene blue, from aqueous solutions at various contact times, pHs and temperatures was investigated. The plant material was chemically modified with H₂SO₄. The surface area of chemically modified activated carbon was 741.2 m² g⁻¹. The surface characterization of both plant- and activated carbon was undertaken using FTIR spectroscopic technique. The adsorption process attains equilibrium within 60 min. The experimental data indicated that the adsorption isotherms are well described by the Langmuir equilibrium isotherm equation and the calculated adsorption capacity of activated carbon was 114.45 mg g⁻¹ at 40° C. The adsorption kinetics of methylene blue obeys the pseudo-second-order kinetic model and also followed by the intraparticle diffusion model up to 60 min. The thermodynamic parameters such as ΔG°, ΔH° and ΔS° were calculated to estimate the nature of adsorption. The activation energy of the system was calculated as 55.51 kJ mol⁻¹. According to these results, prepared activated carbon could be used as a low-cost adsorbent to compare with the commercial activated carbon for the removal textile dyes from textile wastewater processes.     

Investigation of nanoparticle generation during femtosecond laser ablation of metals

The production of nanoparticles via femtosecond laser ablation of gold and copper is investigated experimentally involving measurements of the ablated mass, plasma diagnostics, and analysis of the nanoparticle size distribution. The targets were irradiated under vacuum with a spot of uniform energy distribution. Only a few laser pulses were applied to each irradiation site to make sure that the plume expansion dynamics were not altered by the depth of the laser-produced crater. Under these conditions, the size distribution of nanoparticles does not exhibit a maximum and the particle abundance monotonously decreases with size. Furthermore, the results indicate that two populations of nanoparticles exist within the plume: small clusters that are more abundant in the fast frontal plume component and larger particles that are located mostly at the back. It is shown that the ablation efficiency is strongly related to the presence of nanoparticles in the plume.     

Spontaneous 2D modulation instability in second harmonic generation process

Two-dimensional modulation instability (2DMI) is experimentally demonstrated in a classical second harmonic generation setup. The spatial spectrum is measured and reveals typical 2DMI bands, in agreement with the analytical MI model. These observations are confirmed by (2 + 1)D numerical simulations.     

Observation and analysis ofE mesons in\bar p p annihilation at rest in H2 gas

Antiproton-proton annihilation at rest in a gaseous H₂ target at NTP into the final state π⁺ π^? K ^± π^? (K ⁰) with an undetectedK ⁰ or \(\bar K^0 \) has been investigated. We observe theE(1420) resonance in the invariant mass spectrum (K ⁰)_miss K ^± π^? with massM _E =1413±8 MeV/c² and widthГ ^E =62 ± 16MeV/c² and find evidence for the production of thef ₁(1285). The absolute branching ratio of \(\bar p\) p → π⁺ π^? E ⁰,E ⁰ →K ₀ ^L K ^± π ^? at (61±6)%P wave annihilation is (3.0±0.9)·10^?4 of all annihilations. The observed suppression of theE production fromP wave with respect to theS wave together with some simple selection rules suggest that the quantum numbers of theE(1420) areJ ^pc=0^?+ and not I⁺⁺.     

Ozone production in oxygen by means of F2-laser irradiation at λ=157.6 nm

Ozone is generated in pure oxygen (p5 kPa), synthetic air (p7 kPa) and oxygen-argon mixtures (p3 kPa) by irradiation of these gases with the VUV light of a repetitively pulsed (f _L15 Hz) F₂-laser at =157.6 nm with maximum about 4 mJ/pulse. An absorption photometer measurement operating at 253.7 nm (Hg line) determines the ozone concentration as a function of oxygen and/or additive gas pressure, the repetition frequency of the laser and the wall temperature of the reaction chamber. The temporal development of the ozone concentration as a function of these parameters is calculated by means of rate equations for the species O(³ P), O₂(X ³ _g ^– ), O₃(¹ A ₁), O(¹ D), O₂(a ¹_g), O₂(b ¹ _g ⁺ ) and vibrationally excited O ₃ ^* (¹ A ₁) and the photon distribution. The maximum concentration of O₃ in the sealed-off chamber reaches 1.6% in pure O₂, 4.1% in air and 1.2% in a 1:5 O₂-Ar mixture at 3 kPa. The annihilation of O₃ by the wall and temperature dependent volume processes (300 KT395 K) is studied and the experimental and theoretical results are compared.     

Real time inverse filter focusing through iterative time reversal

In order to achieve an optimal focusing through heterogeneous media we need to build the inverse filter of the propagation operator. Time reversal is an easy and robust way to achieve such an inverse filter in nondissipative media. However, as soon as losses appear in the medium, time reversal is not equivalent to the inverse filter anymore. Consequently, it does not produce the optimal focusing and beam degradations may appear. In such cases, we showed in previous works that the optimal focusing can be recovered by using the so-called spatiotemporal inverse filter technique. This process requires the presence of a complete set of receivers inside the medium. It allows one to reach the optimal focusing even in extreme situations such as ultrasonic focusing through human skull or audible sound focusing in strongly reverberant rooms. But, this technique is time consuming and implied fastidious numerical calculations. In this paper we propose a new way to process this inverse filter focusing technique in real time and without any calculation. The new process is based on iterative time reversal process. Contrary to the classical inverse filter technique, this iteration does not require any computation and achieves the inverse filter in an experimental way using wave propagation instead of computational power. The convergence from time reversal to inverse filter during the iterative process is theoretically explained. Finally, the feasibility of this iterative technique is experimentally demonstrated for ultrasound applications.     

Influence of the slow wave on the relation between the angular resonances and the leaky guided modes properties for a poroelastic plate embedded in water

A numerical study of the guided modes in a water-saturated poroelastic plate that obeys the Biot theory is presented. In the first part, we study the leaky guided modes and the angular resonances when the slow wave does not propagate. Two types of guided modes exist. The first ones occur from coupling of the fast longitudinal wave with the shear wave; most of them propagate whatever the frequency is, provided that it is not close to their cut-off frequencies. The leaky guided modes of the second type occur from coupling of the two longitudinal waves and the shear wave. These modes do not propagate (they are highly damped) as long as the slow wave remains diffusive. We show that the characteristics of the angular resonances can be linked to the leaky guided waves of the first type in the same way as for an elastic plate. The guided modes of the second type may not be associated to angular resonances. In the second part, we consider a thinner plate in a higher frequency range so that the slow wave can propagate. Once again its influence is studied both on the leaky guided modes and on the angular resonances.