Analysis of two stacked cylindrical dielectric resonators in a TE₁₀₂ microwave cavity for magnetic resonance spectroscopy

The frequency, field distributions and filling factors of a DR/TE??? probe, consisting of two cylindrical dielectric resonators (DR1 and DR2) in a rectangular TE??? cavity, are simulated and analyzed by finite element methods. The TE(+++) mode formed by the in-phase coupling of the TE??(δ)(DR1), TE??(δ)(DR2) and TE??? basic modes, is the most appropriate mode for X-band EPR experiments. The corresponding simulated B(+++) fields of the TE(+++) mode have significant amplitudes at DR1, DR2 and the cavity's iris resulting in efficient coupling between the DR/TE??? probe and the microwave bridge. At the experimental configuration, B(+++) in the vicinity of DR2 is much larger than that around DR1 indicating that DR1 mainly acts as a frequency tuner. In contrast to a simple microwave shield, the resonant cavity is an essential component of the probe that affects its frequency. The two dielectric resonators are always coupled and this is enhanced by the cavity. When DR1 and DR2 are close to the cavity walls, the TE(+++) frequency and B(+++) distribution are very similar to that of the empty TE??? cavity. When all the experimental details are taken into account, the agreement between the experimental and simulated TE(+++) frequencies is excellent. This confirms that the resonating mode of the spectrometer's DR/TE??? probe is the TE(+++) mode. Additional proof is obtained from B?(x), which is the calculated maximum x component of B(+++). It is predominantly due to DR2 and is approximately 4.4 G. The B?(x) maximum value of the DR/TE??? probe is found to be slightly larger than that for a single resonator in a cavity because DR1 further concentrates the cavity's magnetic field along its x axis. Even though DR1 slightly enhances the performance of the DR/TE??? probe its main benefit is to act as a frequency tuner. A waveguide iris can be used to over-couple the DR/TE??? probe and lower its Q to ≈150. Under these conditions, the probe has a short dead time and a large bandwidth. The DR/TE??? probe's calculated conversion factor is approximately three times that of a regular cavity making it a good candidate for pulsed EPR experiments.     

Wave-function-based characteristics of hybrid mesons

We propose some extensions of the quark potential model to hybrids, fit them to the lattice data and use them for the purpose of calculating the masses, root mean square radii and wave functions at the origin of the conventional and hybrid charmonium mesons. We treat the ground and excited gluonic field between a quark and an antiquark as in the Born-Oppenheimer expansion, and use the shooting method to numerically solve the required Schrödinger equation for the radial wave functions; from these wave functions we calculate the mesonic properties. For masses we also check through a Crank Nichelson discretization. For hybrid charmonium mesons, we consider the exotic quantum number states with J ^PC = 0^+?, 1^?+ and 2^+?. We also compare our results with the experimentally observed masses and theoretically predicted results of the other models. Our results have implications for scalar form factors, energy shifts, magnetic polarizabilities, decay constants, decay widths and differential cross-sections of conventional and hybrid mesons.     

On the Constant Metric Dimension of Generalized Petersen Graphs P（n, 4）

In this paper,we consider the family of generalized Petersen graphs P(n,4).We prove that the metric dimension of P(n,4) is 3 when n ≡ 0(mod 4),and is 4 when n = 4k + 3(k is even).For n ≡ 1,2(mod 4) and n = 4k + 3(k is odd),we prove that the metric dimension of P(n,4) is bounded above by 4.This shows that each graph of the family of generalized Petersen graphs P(n,4)has constant metric dimension.     

A Novel Synthesis and Characterization of Titanium Superoxide and its Application in Organic Oxidative Processes

A novel, exceptionally stable titanium superoxide radical ion was prepared and its structure determined by FTIR, ESR, Raman spectroscopy, X-ray diffraction, thermogravimetric/differential thermal analysis and elemental analysis. This heterogeneous catalyst has been found to be effective for the selective oxidation of aromatic amines and phenols to the corresponding nitro aromatics and p-quinones, respectively. In addition, this non-toxic, inexpensive and reusable catalyst has also been used in aminobromination of olefins, which proceed to give the 1, 2-bromoaminated anti-Markovnikov product. A brief account of these results is summarized in this review.     

Synthesis and solution properties of a pH‐responsive cyclopolymer of zwitterionic ethyl 3‐(N,N‐diallylammonio)propanephosphonate

The zwitterionic monomer, ethyl 3‐(N,N‐diallylammonio)propanephosphonate, was cyclopolymerized in aqueous solutions using t‐butylhydroperoxide or ammonium persulfate as initiators to afford a polyphosphonobetaine (PPB). The protonation of P(?O)OEtO^– and deprotonation of ? NH⁺ groups in PPB by HCl and NaOH, gave the corresponding cationic polyphosphononic acid (CPP) and anionic polyphosphonate (APP). The presence of two pH‐responsive functionalities in APP has led to establish the equilibria: APP ? PPB ? CPP, the position of which very much dictates the viscosity behavior of its aqueous solution. The PPB demonstrated “antipolyelectrolyte” viscosity behavior; however, in contrast to many polycarbo‐ and polysulfo‐betaines, it was found to be soluble in salt‐free water as well as in salt‐added solutions. Basicity constant (K₁) of the amine group in APP, as determined by potentiometric technique, were found to be “apparent,” and as such followed the modified Henderson‐Hasselbalch equation. The study demonstrated a correlation between the basicity constants and viscosity values. © 2010 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2010     

Metal carbonyl-promoted reactions of ferrocenylacetylene with sulfur to form thiophene, dithiine, thioketone and vinylthioketone derivatives

Photolysis of a hexane solution of ferrocenylacetylene and sulfur powder in presence of Cr(CO)₆ resulted in the formation of 2,6-diferrocenyldithiine and 2,5-diferrocenylthiophene. Similar reactions with Mo(CO)₆ or W(CO)₆ gave only the thiophene derivative. Formation of ferrocenyl-substituted thioketone complexes was observed in the reaction of ferrocenylacetylene with water and sulfur, in presence of W(CO)₆. Use of D₂O confirmed water as source of protons for the conversion of acetylenic CH to CH₃.     

A short and efficient synthesis of furo[2,3-b]indoles

Application of Wittig olefination-Claisen rearrangement protocol for the short synthesis of furo[2,3-b]indoles is described.     

Two-dimensional position sensitive neutron detector

Pramana - A two-dimensional position sensitive neutron detector has been developed. The detector is a3He + Kr filled multiwire proportional counter with charge division position readout and has a...     

A review on potential development of flame retardant kenaf fibers reinforced polymer composites

Kenaf fibers have been extensively explored from the past few decades in polymer composites industries owing to its extensive adaptations, excellent properties together with its comparable mechanical properties to traditional glass fibers polymer composites. The combustibility or lowered flame retardancy hampered the diverse applications of kenaf fibers reinforced polymer composites, as it affects the mechanical strength and stiffness of composites during fire. Current review article intended to be a comprehensive source of published literature involving the flame retardants (FRs), types and applications of FRs and the fabrication of kenaf fibers reinforced polymer composites. This article will also provide a perfect data on the recent development of the FR kenaf fibers polymer composites with different FRs and explored its structural and semi‐structural industrial application for performing further research in this topic. Copyright © 2016 John Wiley & Sons, Ltd.     

An open source ion gate pulser for ion mobility spectrometry

Excluding the ion source, an ion mobility spectrometer is fundamentally comprised of drift chamber, ion gate, pulsing electronics, and a mechanism for amplifying and recording ion signals. Historically, the solutions to each of these challenges have been custom and rarely replicated exactly. For the IMS research community few detailed resources exist that explicitly detail the construction and operation of ion mobility systems. In an effort to address this knowledge gap we outline a solution to one of the key aspects of a drift tube ion mobility system, the ion gate pulser. Bradbury-Nielsen or Tyndall ion gates are found in nearly every research-grade and commercial IMS system. While conceptually simple, these gate structures often require custom, high-voltage, floating electronics. In this report we detail the operation and performance characteristics of a wifi-enabled, MOSFET-based pulser design that uses a lithium-polymer battery and does not require high voltage isolation transformers. Currently, each output of this circuit follows a TTL signal with ~20 ns rise and fall times, pulses up to +/? 200 V, and is entirely isolated using fiber optics. Detailed schematics and source code are provided to enable continued use of robust pulsing electronics that ease experimental efforts for future comparison.