Spectrophotometric determination of ciprofloxacin in pure form and in tablets through charge-transfer complexation reactions

Three simple, quick and sensitive spectrophotometric methods are described for the determination of ciprofloxacin. The methods are based on the reaction of this drug as ann-electron donor with 2,3-dichloro-5,6-dicyano-p-benzoquinone (DDQ), 7,7,8,8,-tetracyanoquinodimethane (TCNQ) andp-chloranil (CL) as -acceptors to give highly coloured complex species. The coloured products are quantitated spectrophotometrically at 460, 843 and 550 nm for DDQ, TCNQ and CL, respectively. Optimization of the different experimental conditions is described. Beer's law is obeyed in the concentration ranges 5–50, 1.5–15 and 20–200 g ml^–1 ciprofloxacin, but the concentration ranges for best accuracy are 10–48, 2.5–15 and 35– 195 g ml^–1 of drug for DDQ, TCNQ and CL, respectively. The relative standard deviations are less than 1.5%. Applications of the suggested methods to ciprofloxacin tablets are presented and compared with the USP method. The stability constants of the 11 DDQ and CL complexes were 1.086 × 10⁴ and 2.581 × 10⁴ lmol^–1, respectively, whereas for the 12 TCNQ complex it was 3.62 × 10⁸1. mol^–1.     

Adsorption of N-Nitrosodiethylamine and N-Nitrosodimethylamine on Activated Carbon: A Pre-Concentration Procedure for Gas Chromatographic Analysis

In this study, a rapid pre-concentration procedure, which employs powdered activated carbon as a clean-up and pre-concentration material, is described for the gas chromatographic analysis of N-nitrosodiethylamine (NDEA) and N-nitrosodimethylamine (NDMA) in aqueous solutions. It was found that powdered activated carbon is suitable for the adsorption of volatile N-nitrosamine compounds from aqueous solutions. Adsorption efficiency with spiked beer samples (alcohol content 5% v/v) was found to be 80.5% (NDMA) and 89.4% (NDEA) and recovery of extraction from activated carbon was calculated as 82.1% (NDMA) and 89.7% (NDEA), respectively. The effect of 100µgmL^–1 of tannic acid on the adsorption was also studied, and no significant effect on the adsorption and extraction of volatile N-nitrosamine compounds was found.     

Structural properties of trans‐cyclohexane‐1,2‐diamine complexes of copper(II) and zinc(II) acesulfamates

The title compounds, trans‐bis(trans‐cyclohexane‐1,2‐diamine)bis(6‐methyl‐2,2,4‐trioxo‐3,4‐dihydro‐1,2,3‐oxathiazin‐3‐ido)copper(II), [Cu(C₄H₄NO₄S)₂(C₆H₁₄N₂)₂], (I), and trans‐diaquabis(cyclohexane‐1,2‐diamine)zinc(II) 6‐methyl‐2,2,4‐trioxo‐3,4‐dihydro‐1,2,3‐oxathiazin‐3‐ide dihydrate, [Zn(C₆H₁₄N₂)₂(H₂O)₂](C₄H₄NO₄S)₂·2H₂O, (II), are two‐dimensional hydrogen‐bonded supramolecular complexes. In (I), the Cu^II ion resides on a centre of symmetry in a neutral complex, in a tetragonally distorted octahedral coordination environment comprising four amine N atoms from cyclohexane‐1,2‐diamine ligands and two N atoms of two acesulfamate ligands. Intermolecular N—H...O and C—H...O hydrogen bonds produce R₂²(12) motif rings which lead to two‐dimensional polymeric networks. In contrast, the Zn^II ion in (II) resides on a centre of symmetry in a complex dication with a less distorted octahedral coordination environment comprising four amine N atoms from cyclohexane‐1,2‐diamine ligands and two O atoms from aqua ligands. In (II), an extensive two‐dimensional network of N—H...O, O—H...O and C—H...O hydrogen bonds includes R₂¹(6) and R₄⁴(16) motif rings.     

Synthesis of (2-hydroxo-5-chlorophenylaminoisonitrosoacetyl)phenyl ligands and their complexes: Spectral,thermal and solvent-extraction studies

Four different types of new ligands Ar[COC(NOH)R] _n (Ar=biphenyl, n = 1 H₂L¹; Ar=biphenyl, n = 2 H₄L²; Ar=diphenylmethane, n = 1 H₂L³; Ar=diphenylmethane, n = 2 H₄L⁴; R=2-amino-4-chlorophenol in all ligands) have been obtained from 1 equivalent of chloroketooximes Ar[COC(NOH)Cl] _n (HL¹-H₂L⁴) and 1 equivalent of 2-amino-4-chlorophenol (for H₂L¹ and H₂L³) or 2 equivalent of 2-amino-4-chlorophenol (for H₄L² and H₄L⁴). (Mononuclear or binuclear cobalt(II), nickel(II), copper(II) and zinc(II) complexes were synthesized with these ligands.) These compounds have been characterized by elemental analyses, AAS, infra-red spectra and magnetic susceptibility measurements. The ligands have been further characterized by ¹H NMR. The results suggest that the dinuclear complexes of H₂L¹ and H₂L³ have a metal:ligand ratio of 1:2; the mononuclear complexes of H₄L² and H₄L⁴ have a metal:ligand ratio of 1:1 and dinuclear complexes H₄L² and H₄L⁴ have a metal:ligand ratio of 2:1. The binding properties of the ligands towards selected transition metal ions (Mn^II, Co^II, Ni^II, Cu^II, Zn^II, Pb^II, Cd^II, Hg^II) have been established by extraction experiments. The ligands show strong binding ability towards mercury(II) ion. In addition, the thermal decomposition of some complexes is studied in nitrogen atmosphere.     

Some polyhydroxy azo–azomethine derivatives of salicylaldehyde: Synthesis, characterization, spectroscopic, molecular structure and antimicrobial activity studies

Some new substituted polyhydroxy azo–azomethine compounds were prepared by reaction of tris(hydroxymethyl)aminomethane with (E)-2-hydroxy-5-(phenyldiazenyl) benzaldehyde and its substituted derivatives. The structures of azo and azo–azomethine compounds were determined by IR, UV–vis, ¹H NMR and ¹³C NMR spectroscopic techniques, and/or X-ray diffraction studies. According to IR spectra, all azo–azomethine compounds adopt keto form in solid state. UV–vis analysis has shown the presence of keto–enol tautomerism in solution for all azo–azomethine compounds, except that for nitro substituted derivative, enol form is dominantly favored in solution. At the same time, above mentioned derivative compounds were studied in vitro for their antimicrobial properties. Among the phenylazosalicylaldehyde series compound tested, 4-phenylazosalicylaldehyde, 4-(3-chlorophenylazo)salicylaldehyde, 4-(2-chlorophenylazo)salicylaldehyde, 4-(4-fluorophenylazo)salicylaldehyde, 4-(3-chlorophenylazo)salicylaldehyde and 4-(4-ethylphenylazo)salicylaldehyde showed a weak antimicrobial activity only against gram positive bacteria. On the contrary, phenylazosalicylaldehyde series compounds were reacted tris(hydroxmethyl)aminomethane, that exhibited a strong antimicrobial activity against gram positive bacteria, yeast and mould. Moreover, while the 2-{[1,3-dihydroxy-2-(hydroxymethyl)propan-2-ylimino]methyl}phenol did not show an inhibition on tested microorganism, the addition of phenyldiazine groups to 2-{[1,3-dihydroxy-2-(hydroxymethyl)propan-2-ylimino]methyl}phenol resulted in a strong increases in antimicrobial activity.     

杂化化合物(C7H11N2)2[CdCl4]·0.5H2O的晶体结构、光谱表征和光学性质

开发了标题化合物（C₇H₁₁N₂）₂[CdCl₄]·0.5H₂O （C₇H₁₁N₂=4-（二甲基氨基）吡啶鎓）的制备程序,并得到良好的收率和纯度。Cd（Ⅱ）离子在略微扭曲的四面体环境中与4个氯离子配位。晶体排列显示出层状结构,有机层和无机层交替排列,平行于（001）平面,位于x=n+1/2（n∈Z）。在晶体中,有机层和无机层通过C—H…Cl、C—H…O、N—H…Cl和N—H…O氢键相互作用连接。Hirshfeld表面分析和结构的指纹图表明分子堆积受氢键和π堆积的控制。UV-Vis漫反射光谱使我们能够用Tauc外推法确定具有半导体特性的3.596 eV的直接带隙。观察到的在562 nm处具有最大值的光致发光带归属于4-（二甲基氨基）吡啶鎓阳离子中的激发π-π^*态。     

New spectrophotometric method for the determination of trace amounts of palladium

Summary A simple, rapid, selective, and sensitive method for the spectrophotometric determination of palladium is developed based on the reaction of Pd(II) with 1-amino-4-hydroxyanthraquinone (AMHA). The reaction is carried out atpH 3.8 in 50% (v/v) ethanol-water medium. The molar absorptivity of the complexed ligand is 1.1 · 10⁴ l mol^–1 cm^–1 at 620 nm. Calibration plots are linear up to 17 µg Pd cm^–3. The optimum concentration range (Ringbom plot) is between 3–14.5 µg cm^–3. The spectral study of the reaction in solutions containing equimolar concentrations or an excess of one component, in thepH range 0.3–6.5, indicate the possible complex transitions that occur in solution. Complete graphical and logarithmic analysis of the absorbance-pH graphs was performed to demonstrate and characterize the complexation equilibria in solution. Under the optimum conditions, palladium can be determined as the noncharged complex Pd(AMHA)₂ in the presence of a large number of foreign ions. Interferences caused by zirconium(IV) could be masked with fluoride ions.

---

Eine neue spektrophotometrische Methode für die Bestimmung von Palladium in Spuren

Zusammenfassung Eine einfache, schnelle und empfindliche Methode für die spektrophotometrische Bestimmung von Palladium wurde auf der Basis der Reaktion von Pd(II) mit 1-Amino-4-hydroxyanthrachinon (AMHA) entwickelt. Die Reaktion wird in 50% (v/v) Ethanol/Wasser beipH 3.8 ausgeführt. Die molare Absorption des komplexierten Liganden beträgt 1.1 · 10⁴ l mol^–1 cm^–1 bei 620 nm. Kalibrierungskurven verlaufen bis zu 17 µg Pd cm^–3 linear. Der optimale Konzentrationsbereich (Ringbom-Plot) liegt zwischen 3 und 14.5 µg cm^–3. Spektroskopische Untersuchungen der Reaktion in Lösungen, entweder mit equimolaren Konzentrationen oder mit einem Überschuß an einer Komponente impH-Bereich 0.3–6.5, lassen Rückschlüsse auf mögliche Komplex-Übergänge in Lösung zu. Es wurde eine vollständige graphische, logarithmische Analyse der Absorptions-pH-Graphen durchgeführt, um die Komplexgleichgewichte in Lösung aufzuklären und zu charakterisieren. Unter den Optimalbedingungen kann Palladium als nichtgeladener Komplex Pd(AMHA)₂ in Gegenwart einer großen Anzahl an Fremd-Ionen bestimmt werden. Schwierigkeiten mit Zirkonium(IV) konnte durch Maskierung mit Fluorid-Ionen umgangen werden.

     

Urea dimethacrylates functionalized with bisphosphonate/bisphosphonic acid for improved dental materials

Incorporation of bisphosphonate/bisphosphonic acid groups in dental monomer structures should increase interaction of these monomers with dental tissue as these groups have strong affinity for hydroxyapatite. Therefore, new urea dimethacrylates functionalized with bisphosphonate (1a, 1b) and bisphosphonic acid (2a, 2b) groups are synthesized and evaluated for dental applications. Monomers 1a and 1b are synthesized from 2‐isocyanatoethyl methacrylate (IEM) and two bisphosphonated amines (BPA1 and BPA2), prepared as reported elsewhere. Selective dealkylation of the bisphosphonate ester groups of 1a and 1b using trimethylsilyl bromide (TMSBr) gives monomers (2a and 2b) with bisphosphonic acid functionality. X‐ray diffractometer (XRD), Raman spectroscopy, and X‐ray photoelectron spectroscopy (XPS) analyses of monomer‐treated HAP particles show that 2a induces formation of stable monomer‐calcium salts, similar to 10‐methacryloyloxydecyl dihydrogen phosphate (MDP), with higher chemical interaction than 2b. The photopolymerization studies indicate good copolymerizability with commercial dental monomers. In vitro studies on NIH 3T3 mouse embryonic fibroblast cells have clearly shown that the tested monomers (1b and 2b) are not toxic according to the MTT standards. All these properties make these monomers suitable as biocompatible cross‐linkers/adhesives for dental applications. © 2017 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2017 , 55, 3195–3204     

A novel ditopic ring-expanded N-heterocyclic carbene ligand-assisted Suzuki-Miyaura coupling reaction in aqueous media

A series of seven-membered ditopic ring-expanded N-heterocyclic carbene (dre-NHC) precursors, bearing sterically demanding and electron-rich aryl groups, were synthesised in moderate yields via the reaction of 1,2,4,5-tetrakis(bromomethyl)benzene with the corresponding N,N′-diarylformamidines in the presence of K₂CO₃ in acetonitrile under an air atmosphere. All new compounds were characterised by HRMS, NMR spectroscopy, and microanalysis, as well as X-ray crystallography for compound 1c. The development of an efficient catalytic system for the Suzuki-Miyaura coupling reaction of aryl chlorides with various boronic acids was also investigated using the in situ generated dre-NHC ligands.