Selective kinetic determination of pyridoxal-5'-phosphate with an ammonia gas-sensing electrode

The coenzyme pyridoxal-5'-phosphate (PLP) is deiermined by in situ measurement of the rate of ammonia production using a potentiometric gas-sensing membrane electrode. It is shown that the initial rate of ammonia liberation from L-tryptophan by action of tryptophanase apoenzyme and the coenzyme can be linearly related to PLP levels in the nanogram range with minimal interference from related compounds. Calibration data for the 1 × 10^-7–2.5 × 10^-6 M range for PLP yielded a least-squares equation of rate (mV min^-1) = (0.64 ± 0.01) C — 0.01 ± 0.02 with a standard error of 0.02 mV min^-1, where concentration, C, is expressed in units of 10^-7 mol l^-1.     

Characterisation and ac-electrical investigation of sublimated bis(dimethylglyoximato)palladium(II) thin films

Thin films of bis(dimethylglyoximato)palladium(II) complex of polycrystalline structure were prepared by sublimation in a vacuum at 140 °C, on glass and p-Si substrates. The films were characterised by spectral optical absorption, energy dispersion X-ray fluorescence (EDXRF), and X-ray diffraction (XRD) methods. After characterisation, metal-insulator (complex)-semiconductor MIS devices were fabricated to measure the frequency dependence of ac-conductivity in a range of 5-100 kHz. Data of ac-measurements follow the correlated barrier-hopping CBH model, from which one of the fundamental absorption peaks, the minimum hopping distance, and other parameters of the CBH model were determined, connecting and relating the optical, structural, and electrical measurements. The dielectric properties of the complex were studied through Debye model, from which the relaxation time for the dipoles (2.45 × 10⁻⁶ s) and the molecular dipole moment (3.63 × 10⁻³⁰ C m ) were determined.     

Reactions with Carbo(heterylhydrazonoyl) Halides. I. Chemistry of Carbo(3-phenylpyrazol-5-yl-hydrazonoyl) Chlorides

The Carbo(3-phenylpyrazol-5-yl-hydrazonoyl) halides 1a , b react with active methylene compounds to yield the 1-(3-phenylpyrazol-5-yl)-pyrazole derivatives 2a – k (Scheme 1). The acyclic intermediates 3a , b could be isolated from reaction of 1a , b with acetylacetone, thus establishing the substitution mechanism for these reactions. Compounds 1a , b reacted with carbon disulfide, phenyl isothiocyanate, methyl cyanide, and with p-chlorobenzaldehyde to yield the corresponding heterocyclic derivatives 5 – 8 , respectively (Scheme 2). The behaviour of compounds 2 with hydrazine hydrate is reported.     

Probing the intrinsic electronic structure of the cubane [4Fe-4S] cluster: nature's favorite cluster for electron transfer and storage

The cubane [4Fe-4S] is the most common multinuclear metal center in nature for electron transfer and storage. Using electrospray, we produced a series of gaseous doubly charged cubane-type complexes, [Fe4S4L4]2- (L = -SC2H5, -SH, -Cl, -Br, -I) and the Se-analogues [Fe4Se4L4]2- (L = -SC2H5, -Cl), and probed their electronic structures with photoelectron spectroscopy and density functional calculations. The photoelectron spectral features are similar among all the seven species investigated, revealing a weak threshold feature due to the minority spins on the Fe centers and confirming the low-spin two-layer model for the [4Fe-4S](2+) core and its "inverted level scheme". The measured adiabatic detachment energies, which are sensitive to the terminal ligand substitution, provide the intrinsic oxidation potentials of the [Fe4S4L4]2- complexes. The calculations revealed a simple correlation between the electron donor property of the terminal thiolate as well as the bridging sulfide with the variation of the intrinsic redox potentials. Our data provide intrinsic electronic structure information of the [4Fe-4S] cluster and the molecular basis for understanding the protein and solvent effects on the redox properties of the [4Fe-4S] active sites.     

A new approach for the solid-phase synthesis of pyrrolo[2,1-c][1,4]benzodiazepines involving reductive cleavage

A methodology based on reductive cleavage followed by cyclization, for the solid-phase synthesis of pyrrolo[2,1-c][1,4]benzodiazepines employing DIBAL-H, is described.     

Viscoelasticity,mechanical properties,and in vivo biocompatibility of injectable polyvinyl alcohol/bioactive glass composite hydrogels as potential bone tissue scaffolds

Abstract

An injectable composite hydrogel composed of polyvinyl alcohol (PVA) and bioactive glass (BG) particles were synthesized by a physical crosslinking approach. The morphology, mechanical properties, and viscoelasticity of the PVA/BG composite hydrogel were characterized. Scanning electronic microscopy (SEM) showed uniform and homogeneous distribution of BG particles throughout the composite hydrogel. The incorporation of 2.5?wt% of BG particles in the composite hydrogel formulations, enhanced the static compressive strength and static elastic modulus by 325% and 150%, respectively. The storage molds (G′) was greater than the loss modules (G′′) at all the frequency range studied, which revealed a self-standing elastic composite hydrogel with a smooth injectability. The PVA/BG composite hydrogel was also implanted subcutaneously in the dorsal region of adult male rats. After 4?weeks of implantation, no inflammatory cells were seen within and around the implant, which indicated that the composite hydrogel was biocompatible. The properties of the synthesized injectable PVA/BG composite hydrogel demonstrate its capability toward bone regeneration.     

Inhibition of Pb-Leaching from Lead Crystal Glass by Coating with Films Prepared by the Sol-Gel Method

The chemical durability of lead glass tumblers (24% PbO) in a 4% (v/v) acetic acid solution before and after coating with sol-gel derived SiO2 films was assessed to determine the extent of reduction in Pb-leaching that can be achieved. It was found that by coating the internal surface of the glass tumblers with 1 ml of 10% TEOS solutions at 100°C and densifying the coating formed at 500°C for 1 h, it was possible to reduce Pb-leaching to about one quarter of that of the uncoated glass.     

Microdetermination of chlorine and bromine in some organic compounds by ion-selective electrodes

Summary The solid state ion-selective chloride and bromide electrodes are used for the microdetermination of chlorine and bromine in organic compounds. After combustion in an oxygen-filled flask, potentiometric titration with silver nitrate at pH 5–7 in presence of 50% dioxan is carried out. Results accurate to ±0.3% absolute are obtained with some partially and highly halogenated compounds.

---

Mikrobestimmung von Chlor und Brom in einigen organischen Verbindungen mit Hilfe von ionenselektiven Elektroden

Zusammenfassung Chlorid- und bromidselektive Festkörperelektroden wurden zur Chlor- und Brombestimmung in teilweise bzw. hochhalogenierten organischen Verbindungen benutzt. Nach Verbrennung im Sauerstoffkolben erfolgt eine potentiometrische Titration mit Silbernitrat bei pH 5–7 in Gegenwart von 50% Dioxan. Die erhaltenen Ergebnisse sind auf ±0,3 % genau.

     

Insights into the Retention Mechanisms on Perfluorohexylpropylsiloxane-Bonded (Fluophase-RP) and Octadecylsiloxane-Bonded (Betasil C18) Stationary Phases Based on the Same Silica Substrate in RP-LC

The solvation parameter model is used to elucidate the retention mechanism on a perfluorohexylpropylsiloxane-bonded (Fluophase RP) and octadecylsiloxane-bonded (Betasil C18) stationary phases based on the same silica substrate with acetonitrile–water and methanol–water mobile phase compositions. Dewetting affects the retention properties of Fluophase RP at mobile phase compositions containing less than 20% (v/v) acetonitrile or 40% (v/v) methanol. It results in a loss of retention due to an unfavorable change in the phase ratio as well as changes in specific intermolecular interactions. Steric repulsion reduces retention of bulky solutes on fully solvated Betasil C18 with methanol–water (but not acetonitrile–water) mobile phase compositions but is not important for Fluophase RP. The retention of weak bases is affected by ion-exchange interactions on Fluophase RP with acetonitrile–water, and to a lesser extent, methanol-water mobile phases but these are weak at best for Betasil C18. The system constants of the solvation parameter model and retention factor scatter plots are used to compare selectivity differences for Fluophase RP, Betasil C18 and a perfluorophenylpropylsiloxane-bonded silica stationary phase Discovery HS F5 for conditions where incomplete solvation, steric repulsion and ion-exchange do not significantly contribute to the retention mechanism. Lower retention on Fluophase RP results from weaker dispersion and/or higher cohesion moderated to different extents by polar interactions since solvated Fluophase RP is a stronger hydrogen-bond acid and more dipolar/polarizable than Betasil C18. Retention factors for acetonitrile–water mobile phases are highly correlated for Fluophase RP and Betasil C18 except for compounds with a large excess molar refraction and weak hydrogen-bonding capability. Selectivity differences are more significant for methanol–water mobile phases. Retention factors on Fluophase RP are strongly correlated with those on Discovery HSF5 for acetonitrile–water mobile phases while methanol–water mobile phases retention on Fluophase RP is a poor predictor of the retention order on Discovery HS F5.     

Utility of N‐[4‐(N‐Substituted Sulfamoyl)Phenyl] Cyanothioformamides in the Synthesis of Heterocyclic Compounds

The novel cyanothioformamides 2a‐d were prepared by treatment of isothiocyanatosulfonamides 1a‐d with potassium cyanide at room temperature. Cyclocondensation of compounds 2b,c with phenyl isocyanate as electrophile furnished the corresponding imidazolidines 3a,b . The reactivity of compound 3a towards some nitrogen nucleophiles was investigated. Thus, the thiosemicarbazone 4 and imidazo[4,5‐b]quinoxaline 6 were synthesized by condensation of compound 3a with thiosemicarbazide and o‐phenylenediamine, respectively. Treatment of 3a with hydrochloric acid afforded compound 7 . Our investigation was extended to include the reactivity of cyanothioformamide 2 towards o‐aminophenol, anthranilic acid, and o‐phenylenediamine and yielded the corresponding heterocycles 9 , 11 and 13 derivatives, respectively. Structures of the synthesized compounds were established by their elemental analysis and spectral data.