Air-activated carbons from almond tree pruning: Preparation and characterization

In this work the results obtained in the preparation and characterization of carbons made from almond tree pruning by non-catalytic and catalytic gasification (using K and Co) with air are analyzed and discussed. The main aim was to obtain high quality activated carbons at the lowest possible cost. The variables studied have been the temperature (190-260 °C) and the time (1-10 h) in non-catalytic gasification and the influence of the catalyst type (K and Co, 1 wt.% referred to cation, at 190 °C and 1 h) and the time (1-4 h) in catalytic gasification with Co at 190 °C. The air flow rate used in all the series was 167 cm³ min⁻¹. In non-catalytic gasification the reaction normalized rate versus the conversion degree was maintained until a conversion value of 10% for the experiment made at 260 °C since, at lower temperatures, this rate drops quickly for low conversion values. The N₂ adsorption isotherms for the carbons of this series resemble type I, although there is an increase of N₂ adsorbed volume at relatively high pressures. A temperature rise produced an increase of the carbon porosity and BET specific surface (116-469 m² g⁻¹). The activation time has a positive effect on the N₂ volume adsorbed by the carbons. The isotherms shapes were similar to those previously commented. A concentration equal to 1 wt.% was used to study the influence of the catalyst type. Under the studied experimental conditions, Co drives to a bigger porosity development than K, although with both catalysts a very similar pore size distribution is obtained. The activation time, in the gasifications catalyzed with Co, gives rise to a very important porosity development in the carbons. This produces a strong increase of the carbon specific surface area with very high values in the 4 h experiment, in which a BET specific surface of 959 m² g⁻¹ was obtained.     

On Genuine Bernstein–Durrmeyer Operators

We continue the studies on the so–called genuine Bernstein–Durrmeyer operators U _n by establishing a recurrence formula for the moments and by investigating the semigroup T(t) approximated by U _n . Moreover, for sufficiently smooth functions the degree of this convergence is estimated. We also determine the eigenstructure of U _n , compute the moments of T(t) and establish asymptotic formulas. Received: January 26, 2007.     

Renormalisation group calculation of the interfacial tension for the three-dimensional Ising model

The interfacial tension of a three-dimensional Ising model in the whole temperature region is calculated by the real-space renormalisation group methods. The cumulant and the finite-cluster approximations with different projection rules are used. The results are consistent with expected low-temperature and global behaviour of the interfacial tension in the three-dimensional model.     

Study to improve the quality of a Mexican straight run gasoil over NiMo/γ-Al2O3 catalysts

Four NiMo catalyst supported on Al₂O₃ with different textural properties have been studied in the hydrodesulfurization (HDS), hydrodenitrogenation (HDN) and hydrodearomatization (HDA) of a Mexican straight run gasoil (SRGO). All reactions were carried out at three different temperatures 613, 633, and 653 K. Alumina supports were analysed by pyridine FTIR-TPD and nitrogen physisorption in order to determine their surface acidity and textural properties, respectively. TPR studies of the NiMo catalysts were analysed to correlate their hydrogenating properties. Metallic particles were characterized (after sulfidation) using transmission electron microscopy (TEM). Catalytic activities are discussed in relation to the physicochemical properties of NiMo catalysts. The importance of textural properties on coke deposition has been emphasized. The results of catalytic activity of these materials varied depending on dispersed MoS particles and pore distribution in final catalysts. The optimum pore diameter was found around 80 Å for HDS and HDN.     

Expandable network and covering properties for uniform Eberlein compacta

In this paper we characterize the class of uniform Eberlein compact spaces through a network condition and also in terms of covering properties for the square of the space.     

Parking Capacity and Pricing in Park'n Ride Trips: A Continuous Equilibrium Network Design Problem

In this paper we consider the problem of designing parking facilities for park'n ride trips. We present a new continuous equilibrium network design problem to decide the capacity and fare of these parking lots at a tactical level. We assume that the parking facilities have already been located and other topological decisions have already been taken.The modeling approach proposed is mathematical programming with equilibrium constraints. In the outer optimization problem, a central Authority evaluates the performance of the transport network for each network design decision. In the inner problem a multimodal traffic assignment with combined modes, formulated as a variational inequality problem, generates the share demand for modes of transportation, and for parking facilities as a function of the design variables of the parking lots. The objective is to make optimal parking investment and pricing decisions in order to minimize the total travel cost in a subnetwork of the multimodal transportation system.We present a new development in model formulation based on the use of generalized parking link cost as a design variable.The bilevel model is solved by a simulated annealing algorithm applied to the continuous and non-negative design decision variables. Numerical tests are reported in order to illustrate the use of the model, and the ability of the approach to solve applications of moderate size.     

Dual frames in connected with generalized sampling in shift-invariant spaces

The aim of this article is to derive stable generalized sampling in a shift-invariant space by using some special dual frames in L²(0,1). These sampling formulas involve samples of filtered versions of the functions in the shift-invariant space. The involved samples are expressed as the frame coefficients of an appropriate function in L²(0,1) with respect to some particular frame in L²(0,1). Since any shift-invariant space with stable generator is the image of L²(0,1) by means of a bounded invertible operator, our generalized sampling is derived from some dual frame expansions in L²(0,1).     

IR finite one-loop box scalar integral with massless internal lines

The IR finite one-loop box scalar integral with massless internal lines has been recalculated. The result is very compact, simple and valid for arbitrary values of the relevant kinematic variables. It is given in terms of only two dilogarithms and a few logarithms, all of very simple arguments. Received: 31 January 2002 / Published online: 26 April 2002     

The first total synthesis of (R)-convolutamydine A

The first total synthesis of (R)-convolutamydine A has been achieved by the organocatalytic addition of acetone to 4,6-dibromoisatin. The absolute configuration was determined by single crystal X-ray diffraction. DFT studies were used to model the transition states for the aldol reaction and equilibrium geometries of the post-aldol reaction intermediates. The DFT study revealed that the aldol bond forming reaction was considerably endothermic.