Determination of some trace elements in human tooth enamel

Determination of seven elements (Cu, Fe, Mg, Mn, Pb, Sr and Zn) in whole enamel and surface layers of extracted non-carious human teeth by FAAS, ETA AAS, ICP-AES and ICP-MS (Pb) is demonstrated. Techniques are described for obtaining whole enamel and its acid dissolution. Fifty microm width enamel layers from outer enamel surface to a 200 microm depth were successively etched in 1 mL of 3 M HClO4 for 3 min dissolution periods. Enamel samples were analyzed for populations under and over 20 years of age and enamel from Bronze Age teeth. Concentrations of microelements in the whole enamel and in the first surface layer (50 microm depth) were compared. With exception of Sr and Mg, all elements show significantly higher concentrations in the first layer than in whole enamel and higher concentration in teeth of individuals over 20 years, which demonstrate the cumulative effect of these elements. The Cu, Fe, Mn, Pb and Zn concentrations in four layers of erupted and non-erupted teeth decreased while Mg and Sr concentrations increased toward enamel-dentine junction. The concentrations of most elements were almost constant as they approached the 150 microm layer. This concentration gradient may result from interaction between saliva and teeth and supports the hypothesis that the surface de- and re-mineralization process is effective at most to 150 microm from the enamel surface.     

Inducible stable DNA replication (iSDR) and the uvr-dependent tolerance of pyrimidine dimers in UV-irradiated Escherichia coli are two uncoupled processes

Inducible stable DNA replication (iSDR) is dependent on recombination and is supposed to play a role in DNA repair of Escherichia coli. Our previous data suggested that iSDR may be involved in the tolerance of UV lesions, which remain unexcised in excision-proficient E. coli exposed to some UV pretreatments. Now, the tolerance of unexcised lesions has been followed in E. coli recB21 and in E. coli priA1 sup mutants, incapable of iSDR. The obtained data do not confirm the previous hypothesis about the involvement of iSDR in the putative uvr-dependent lesion tolerance. They rather suggest that iSDR and the uvr-dependent lesion tolerance are two uncoupled processes.     

Strong cooperativeness in the mononuclear iron(II) derivative exhibiting an abrupt spin transition above 400 K

The spin crossover system, [Fe(bzimpy)(2)](ClO(4))(2).0.25H(2)O, was reinvestigated above room temperature (bzimpy = 2,6-bis(benzimidazol-2-yl)pyridine). The system exhibits an abrupt low-spin to high-spin transition at T(c) = 403 K. Liberation of a fractional amount of water does not affect the spin crossover: the system is perfectly reversible with a hysteresis width of DeltaT = 12 K. The existence of the hysteresis at such high temperature determines that the lowest limit of the solid-state cooperativity parameter is J/k > 403 K despite long iron(II) separations (10 A). The high cooperativeness has been assigned to a perfect pi-stacking of the benzimidazole rings in the crystal lattice at a distance as short as 3.6 A. Variable-temperature IR data and the heat capacity measurements match well the magnetic data. The thermodynamic properties are DeltaH = 17 kJ mol(-)(1), DeltaS = 43 J K(-)(1) mol(-)(1), so that the entropy of the spin transition shows a considerable contribution from the molecular vibrations. A theoretical model has been applied in fitting the magnetic data along the whole hysteresis path. A statistical distribution of the cooperativity parameter led to the feature that angled walls of the hysteresis loop are well reproduced.     

Electrophoretic analysis of oxidatively modified eye lens proteins in vitro: implications for diabetic cataract

Sodium dodecyl sulfate-polyacrylamide gel electrophoresis (SDS-PAGE) profiles of eye lens proteins showed that both progression of diabetic cataract in rats in vivo and precipitation of soluble eye lens proteins stressed by free radicals in vitro were accompanied by significant protein cross-linking. There was a noticeable contribution of disulfide bridges to protein cross-linking in diabetic eye lens in vivo. In contrast, under conditions in vitro, when eye lens proteins were exposed to hydroxyl or peroxyl radicals, we showed that the participation of reducible disulfide linkages in the formation of high molecular mass products was markedly lower. These in vivo--in vitro differences indicate that the generally accepted role of reactive oxygen species in diabetic cataractogenesis may be overestimated in connection with the processes of protein cross-linking.     

Insoluble eggshell matrix proteins--their peptide mapping and partial characterization by capillary electrophoresis and high-performance liquid chromatography

Avian eggshell matrix proteins were studied by two analytical approaches. Peptide mapping was done by trypsin and pepsin followed by collagenase cleavage; analyses were carried out by capillary electrophoresis and reversed-phase high-performance liquid chromatography (HPLC). Comparison of peptide maps obtained by both methods revealed a complex mixture of peptides in the insoluble layers of the eggshell; it was concluded that there are at least three different insoluble protein/peptide layers in the avian eggshell (cuticle, palisade, and mammillary layer). Partial characterization of peptides in each layer was made by HPLC-mass spectrometry analysis. There is an evidence that the eggshell insoluble proteins contain species susceptible to collagenase cleavage, however, the sequences split by this enzyme probably are not those typical for the main triple-helical core of collagenous proteins. It is proposed that the action of collagenase upon eggshell proteins is caused by the side effect of collagenase described previously with synthetic peptides. Some of the proteins present are probably glycosylated. Fatty acid content in the insoluble eggshell layers (after decalcification) was in the range of 2-4% (which reflected both lipid and lipoproteins bound fatty acids). Porphyrin pigments are dominant in the cuticle layer.     

Multiresidue determination of pesticides in drinking and related waters by gas chromatography/mass spectrometry after solid-phase extraction: interlaboratory study

As part of a project funded by the European Commission (EC) for the development and evaluation of multiresidue methods for analysis of drinking and related waters, 15 European laboratories evaluated a method using styrene-divinylbenzene co-polymer solid-phase extraction followed by gas chromatography/mass spectrometry. The main aim of the study was to evaluate whether the method meets the requirements of EC Directive 98/83 in terms of accuracy, precision, and detection limit for 22 pesticides according to the following requirements: limit of detection, < or = 0.025 microg/L; accuracy, expressed as recovery between 75 and 125%; and precision, expressed as repeatability relative standard deviation of the method of < 12.5% and as reproducibility relative standard deviation of the method of < 25%. Analyses for unknown concentrations were performed with fortified commercial bottled and tap waters. All laboratories were able to achieve detection limits of 0.01 microg/L for all pesticides except dimethoate and desisopropylatrazine (0.02 microg/L). The criteria for repeatability were met for all compounds except trifluralin, dimethoate, and lindane in bottled water and chlorpyrifos, dimethoate, and lindane in tap water. The criteria for reproducibility were met for all compounds except trifluralin, dimethoate, and lindane in bottled water and pendimethalin, chlorpyrifos, dimethoate, terbutryn, and lindane in tap water. In terms of accuracy, the method meets the requirements for all pesticides in both matrixes, except for lindane in bottled water and lindane and chlorpyrifos in tap water.     

Configuration and E/Z interconversion mechanism of O(S)-allyl-S(O)-methyl-N-(acridin-9-yl) iminothiocarbonate

The configuration and dynamic behavior of O-allyl-S-methyl-N-(acridin-9-yl)iminothiocarbonate (1) and its S-allyl-O-methyl regioisomer (2) were studied using quantum chemical calculations and by applying a novel graphical method to scatter maps obtained from MD simulations for evaluation of an NOE-weighted internuclear distance (r(NOE)). Energy calculations indicated that the Z configuration was predominant for each compound and, further, this was supported both by the calculated chemical shifts and the r(NOE). Both N-inversion- and rotation-type transition-state structures were also calculated for the E/Z isomerization process, the results indicating that the preferred interconversion mechanism for 1 is N-inversion, but contrastingly, interconversion via rotation is equally as probable as N-inversion for 2. This supports the notion that one or the other or both pathways can be active and each system needs to be assessed on a case-by-case basis.     

Affinity chromatography of porcine pepsin A using quinolin-8-ol as ligand

Stationary phase containing quinolin-8-ol immobilized on macroporous methacrylate support for the affinity chromatography of porcine pepsin A is described. Optimized chromatographic conditions for separation of porcine pepsin A on this stationary phase were found investigating the influence of pH, concentration, ionic strength and chemical composition of the used mobile phases. The stationary phase shows a good reproducibility of chromatographic analyses (relative standard deviation, +/-2%), a high recovery (ca. 93%) and a satisfactory capacity (13 mg pepsin A/1 mL stationary phase) for porcine pepsin A. The obtained findings confirm the applicability of affinity chromatography on the stationary phase with immobilized quinolin-8-ol to the isolation and determination of porcine pepsin A.     

Properties of mixed alkanethiol-dendrimer layers and their applications in biosensing

We studied the properties of mixed alkanethiol-dendrimer layers on a gold support and their application in biosensing. We showed that properties of glucose sensor can be modified using a different ratio of 1-hexadecanethiol (HDT) and poly(amidoamine) dendrimer of first generation (G1). The cyclic voltammetry in the presence of the redox couple, Fe(CN)(6)(3-)/Fe(CN)(6)(4-), was used for estimating how effectively the layer blocks the redox probe's access to the electrode surface. A scanning electrochemical microscope (SECM) was used to image the resulting distribution of the organic compounds. We found that with increasing content of dendrimers, the integrity of the layers was improved.     

Enantioseparation of selected N-tert.-butyloxycarbonyl amino acids in high-performance liquid chromatography and capillary electrophoresis with a teicoplanin chiral selector

Enantioseparation of N-tert.-butyloxycarbonyl amino acids (N-t-Boc-Aas) with teicoplanin chiral selector was performed in two different separation systems: A teicoplanin-based chiral stationary phase (CSP-TE) was used in reversed-phase HPLC, and the same chiral selector (CS) was added into a background electrolyte (BGE) in HPCE. The enantioselective interaction with the same CSP/CS can be influenced by several factors, such as mobile phase/background electrolyte composition: the buffer concentration, pH, the CS concentration, the presence of organic modifiers. In addition, the charge of the chiral selector related to the charge of the analyte and to EOF are important variables in CE. The effect of these parameters on enantioselectivity and enantioseparation of selected N-t-Boc-Aas was studied. The presence of a sufficient concentration (1% solution) of a triethylamine acetate buffer in the mobile phase was shown to be essential for enantioseparation of these blocked amino acids in HPLC. A certain concentration of teicoplanin aggregates (along with teicoplanin molecules) in the BGE is required to obtain enantioseparation of N-t-Boc-Aas in HPCE.