高频燃烧红外吸收光谱法测定钨钛合金中碳含量

建立高频燃烧红外吸收光谱法测定钨钛合金中碳含量的分析方法。在1980 W分析功率下,称取0.3 g样品,以2.0 g钨锡及0.5 g纯铁混合助熔,用高频红外分析仪测定碳。碳的含量在0.013%~0.050%范围内与红外吸收峰面积线性相关,相关系数为0.9993。碳的测定下限为3.6μg/g,方法检出限为1.08μg/g。该法测定结果的相对标准偏差为2.97%~4.11%(n=8),碳的加标回收率为96.2%~103.1%。该方法能够满足合金中碳含量的分析要求。     

Theoretical Study on the Reaction Mechanism of Ketene CH2CO with Isocyanate NCO Radical

The bimolecular single collision reaction potential energy surface of an isocyanate NCO radical with a ketene CH2CO molecule was investigated by means of B3LYP and QCISD（T） methods. The computed results indicate that two possible reaction channels exist on the surface. One is an addition-elimination reaction process, in which the CH2CO molecule is attacked by the nitrogen atom at its methylene carbon atom to lead to the formation of the intermediate OCNCH2CO followed by a C-C rupture channel to the products CH2NCO＋CO. The other is a direct hydrogen abstraction channel from CHzCO by the NCO radical to afford the products HCCO＋HNCO. Because of a higher barrier in the hydrogen abstraction reaction than in the addition-elimination reaction, the direct hydrogen abstraction pathway can only be considered as a secondary reaction channel in the reaction kinetics of NCO＋ CH2CO. The predicted results are in good agreement with previous experimental and theoretical investigations.     

一种新型共生沸石(T-L)的合成与表征

在Na₂O-K₂O-Al₂O₃-SiO₂-H₂O体系中水热合成了一种新型的共生沸石, 它由L型沸石生长在T型沸石的一端而形成, 称之为T-L型沸石. 通过XRD, SEM, TEM, EDX, IR等手段对其进行了初步的表征. SEM相片表明这种沸石具有特殊的铆钉状外形; 在TEM相片上可以清楚地看到L型沸石的大孔道, 此孔道与L型沸石的表面垂直. 通过EDX的数据计算发现共生沸石的两相有不同的骨架硅铝比: T型沸石部分Si/Al＝3.71, L型沸石部分Si/Al＝3.41. 在该样品中B酸大于L酸.     

电化学方法对两性接枝星形聚合物LB膜屏蔽效应的研究

本文将自制Y式玻碳电极拉上两性接枝星形聚合物(GPSMA)的LB膜,用循环伏安法研究谈膜的屏蔽效应,讨论了接枝量、成膜条件等对膜缺陷的影响,并提出了减少缺陷的办法。     

一种制备大量氧化锌纳米管的简单方法(英)

ZnO nanotubes were synthesized in large scale by thermal decomposition of the precursors obtained via chemical reaction between Zn(CH₃COO)₂·2H₂O and NaHCO₃ in the presence of surfactant sodium dodecyl sulfate (SDS). The inner diameters of the tubes were in the range of 80～100 nm, and outer diameters in the range of 160～260 nm with lengths up to a few micrometers. The products were characterized with XRD, TEM, and SEM.     

CALCULATING THE MOLECULAR INTERNAL ROTATING STERIC FACTOR OF POLYMERS BY THE RADIATION CROSSLINKING METHOD

In this paper, calculating the molecular internal rotating steric factor of polymers by the radiation crosslinking method is studied and a relationship between the molecular internal rotating steric factor (σ) and crosslinking parameter βis established~([1]) by taking account of the effect of polymer chain flexibility on βvalue, σvalue of polymer obtained by this method is in agreement with that given with other method.     

双取代单酰胺与硝酸铀酰萃合物的制备与表征

合成了系列双取代单酰胺萃取剂，利用萃取方法获得了与硝酸铀酰的萃合物。利用元素分析、红外光谱、¹H NMR和¹³C NMR对萃合物进行了表征。结合实验数据初步探讨了萃合物的结构、萃取剂的结构与性能以及萃取体系的三相等问题。     

Two Novel Sub-skeleton Types of ent-Kauranoids from Isodon gesneroides

Two novel ent-kauranoids with new sub-skeleton types, gesneroidins G and H were isolated as white powder from the ether extract of the leaves of Isodon gesneroides through normal phase column chromatography. Their structures were elucidated as 3β,6α,7β-triacetoxyl-15-hydroxyl-14-oxo-ent- 15,16-seco-kaur-11,17-olide and Iα-hydroxyl-3β,6α,7β,11 β-tetraacetoxyl-ent-nor-15,17-kaur-8,16-olide on the basis of the spectral evidences including ID and 2D NMR spectra.     

A new anode material LiMoS2 for use in rechargeable Lithium Ion Batteries

The novel applications of molybdenum disulfide in recent research were reviewed, such as in lubricant, catalyst and photoelectrochemical solar cells. Recently, we found that LiMoS2 is a good candidate for new anode materials for lithium ion batteries with high lithium storage capacity.Here, the anode material LiMoS2 was synthesized by a hydrothermal method at 150℃ and the electrochemical characterization as an anode material for lithium ion batteries was examined.put in Teflon-lined stainless steel autoclaves of capacity 40 mL. Distilled water was used to fill the autoclaves to 70 % of the total volume. The autoclaves were maintained at 150℃ for 24 h and then cooled naturally. The resulting dark-gray powders were filled and washed with distilled water,diluted hydrochloric acid and ethanol, successively. The final products were dried at 80℃ for 24 h.The powder X-ray diffraction pattern showed the prepared LiMoS2 was amorphous structure. A test cell using LiMoS2 as the active material was discharged and charged between 3 and 0.01 V with respect to Li metal at a constant current density of C/5 (that is, one lithium per formula unit in 5 hours). During the first discharge, the potential rapidly drops to reach a large plateau at 2.2 V, then slowly drops to the other plateau at 0.8 V, and then continuously decreases down to 0.01V. There is only a plateau at 1.35 V in the subsequent discharge curves. The plateaus of charge potential appear at about 1.9 V.The irreversible loss was 41% in the first cycle. The ratio of discharge and charge is more than 99%in the subsequent cycles. Moreover, the ratio of discharge and charge almost reaches 100% after thedemonstrated that LiMoS2 has a very high capacity and a good cycle-ability as an anode material forlithium ion batteries.     

交替三线性分解算法与反相高效液相-二极管阵列检测方法相结合同时测定苯二酚的位置异构体

 利用交替三线性分解算法与反相高效液相 二极管阵列检测 (RP HPLC DAD)相结合 ,在洗脱时间为1 0 86min～ 1 399min(间隔 1 / 1 50min)、紫外吸收波长为 2 68nm～ 2 98nm(间隔 1nm)时对苯二酚位置异构体的重叠及光谱体系进行了分辨研究。分辨结果与实际结果一致。同时测定了水溶液中共存的邻苯二酚、间苯二酚和对苯二酚的含量 ,回收率分别为 (1 0 0 1± 1 0 ) % ,(99 4± 1 4) % ,(1 0 0 5± 1 7) %。研究结果表明 :该方法定量快速准确 ,实验操作步骤简单 ,解决了在干扰物存在条件下三者很难同时分辨的问题。