锰结核中硅,铝,铁,镁,磷,钾,锰,钛的XRFA

本文叙述了用XRF分析锰结核中Si、Al、Fe、Mg、P、K、Mn和Ti的方法。按照通常锰结核的主次成分制备6个人工合成标准,根据Sherman方程计算了已知成分(二元系统)的相对强度。用L-T方求得了互致元素校正的理论α系数(基本的、混合的、修正的),用DATAFLEX151B计算机以BASIC语言汇了“PRA,APU”计算机程序。然后进行非线性回归分析了锰结核样品得到了满意的结果。     

Wave scattering from dielectric-coated cylinder

The high frequency scattering of TE wave from a dielectric-coated conducting cylinder is obtained via the geometrical theory of diffraction. The high frequency ray solution is computed numerically by the methods of residue series, Taylor series and stationary phase in shadow, transition and illuminated region, respectively. The numerical results of the high frequency ray solution show good agreement with the eigenfunction results.     

金属有机化学气相沉积法制备钛酸铅铁电薄膜

利用低压ＭＯＣＶＤ工艺分别在（００１）取向的ＬａＡｌＯ_３，ＳｒＴｉＯ_３和重掺杂硅单晶衬底上制备ＰｂＴｉＯ_３铁电薄膜，并通过Ｘ射线衍射谱对薄膜的微结构进行分析．Ｘ射线θ－２θ扫描显示硅衬底上得到了ＰｂＴｉＯ_３多晶薄膜，另两种衬底上得到了择优取向的ＰｂＴｉＯ_３薄膜．ＬａＡｌＯ_３衬底上的ＰｂＴｉＯ_３薄膜有ａ和ｃ两个取向，也就是薄膜中存在着９０°畴结构，而生长在ＳｒＴｉＯ_３衬底上的ＰｂＴｉＯ_３薄膜中只存在ｃ方向的择优取向．由于薄膜的尺度效应，发现ｃ轴晶格常数与块材相比均缩短．Ｘ射线的φ扫描验证了后两类薄膜的外延特性，利用同步辐射的高强度和高能量分辨率用摇摆曲线方法研究了这两种外延薄膜的品质，进一步证明了ＳｒＴｉＯ_３衬底上的ＰｂＴｉＯ_３薄膜的单畴特性．利用重掺杂的硅衬底作底电极，测量显示直接生长于硅衬底上的ＰｂＴｉＯ_３多晶薄膜具有良好的铁电性能 关键词：     

A possibility of parallel and anti-parallel diffraction measurements on neutron diffractometer employing bent perfect crystal monochromator at the monochromatic focusing condition

In a conventional diffractometer having single monochromator, only one position, parallel position, is used for the diffraction experiment (i.e. detection) because the resolution property of the other one, anti-parallel position, is very poor. However, a bent perfect crystal (BPC) monochromator at monochromatic focusing condition can provide a quite flat and equal resolution property at both parallel and anti-parallel positions and thus one can have a chance to use both sides for the diffraction experiment. From the data of the FWHM and the Δd/d measured on three diffraction geometries (symmetric, asymmetric compression and asymmetric expansion), we can conclude that the simultaneous diffraction measurement in both parallel and anti-parallel positions can be achieved.     

具有平行平均曲率向量子流形的曲率估计与稳定性

本文估计空间形式中具有平行平均曲率向量子流形上共形度量的数量曲率上界,并利用其研究了具有常平均曲率超曲面的稳定性．     

Reflection of Surface Plasmon Polaritons by a Corner Reflector of Negative Index Materials

A novel type of corner reflector for the reflection of surface plasmon polariton (SPP) is proposed. The reflector consists of two layers of compensatory media whose permittivity and permeability take opposite signs to that of the corresponding layer of the SP waveguide. By rigorously solving Maxwell's equations, the reflected SPP is proved to exist. The transverse wave vector of the reflected SPP is always antiparallel to that of the incident SPP and no phase retardation is introduced.     

树映射的分布混沌

设T是个有限树,f是T上的连续映射.证明了f是分布混沌的当且仅当它的拓扑熵是正数.一些已知结论得到了改进.     

高阶半线性抛物型方程组的生命跨度

其中m,P,q>1．利用试验函数方法,首先推导一些积分不等式,然后对方程组爆破解的生命跨度 [0,T)给出估计．     

裂解气相色谱质谱法研究增塑剂邻苯二甲酸二甲酯的热降解机理

用裂解气相色谱-质谱联用方法研究了橡胶产品中使用的增塑剂邻苯二甲酸二甲酯(DMP)在不同温度条件下的热裂解行为.对不同温度条件下裂解产物的分析表明,在初始阶段DMP的裂解产物主要为二氧化碳、苯、甲苯和苯甲酸甲酯.随着温度的升高苯甲酸甲酯进一步裂解成为分子质量更小的自由基,并发生稠环化反应形成更稳定的菲、蒽、间-联三苯、三亚苯等芳香族多环化合物.根据分析实验提供的裂解产物信息和有机物热裂解化学反应的原理对DMP的热裂解反应机理作了探讨,表明在废旧合成橡胶热裂解回收过程中,增塑剂DMP的高温裂解会产生多环芳烃污染物.应选择合适裂解工艺和裂解温度,以减少对环境的污染.     

基于CCD采集的Mach-Zehnder干涉条纹图的处理算法

Mach-Zehnder干涉仪适用于研究气体密度迅速变化的状态。由于气体折射率的变化与其密度的变化成正比,而折射率的变化将使通过气体的光线有不同的光程,因此可通过干涉臂变化对干涉条纹图像效果的影响得到气体密度。实测中,采用图像采集卡和CCD来接收Mach-Zehnder干涉仪产生的条纹图像,再通过计算机对条纹图像的条纹间距进行处理,从而得到气体密度的变化状态。从光干涉理论出发,对Mach-Zehnder干涉条纹图像特征进行了分析,建立了Mach-Zehnder干涉条纹的数学模型,并根据此模型设计了处理Mach-Zehnder干涉条纹图像的算法。算法包括图像的预处理(即图像的噪声提取)、图像的二值化及图像的细化。