基于灰色数学的洗胃液量的软测量

鉴于洗胃液量实时在线检测与求解的困难,提出利用灰色数学的累加生成方法,把液量作为主导变量,管路二处压力差的累积压力作为二次变量,根据二者之间的一一映射关系,仿真实验研究洗胃液量的软测量技术,给出了实验结果,为液量的工程检测提供了一种数学方法.     

Ligand effect in the synthesis of hyperbranched polymers via copper-catalyzed azide-alkyne cycloaddition polymerization (CuAACP)

Copper-catalyzed azide-alkyne cycloaddition polymerization (CuAACP) of AB₂ monomers demonstrated a chain-growth mechanism without any external ligand because of the complexation of in situ formed triazole groups with Cu catalysts. In this study, we explored the use of various ligands that affected the polymerization kinetics to tune the polymers’ molecular weights and the degree of branching (DB). Eight ligands were studied, including polyethylene glycol monomethyl ether (PEG₃₅₀, M_n = 350), tris(benzyltriazolylmethyl)amine (TBTA), 2,6-bis(1-undecyl-1H-benzo[d]imidazol-2-yl)pyridine (Py(DBim)₂), 2,2′-bipyridyl (bpy), 4,4′-di-n-nonyl-2,2′-bipyridine (dNbpy), N,N,N′,N″,N″-pentamethyldiethylenetriamine (PMDETA), N,N,N′,N″,N″-penta(n-butyl)diethylenetriamine (PBuDETA), and N,N,N′,N″,N″-pentabenzyldiethylenetriamine (PBnDETA). All ligands except PEG₃₅₀ exhibited stronger coordination with Cu(I) than the polytriazole polymer, which freed the Cu catalyst from polymers and resulted in dominant step-growth polymerization with simultaneous chain-growth feature. Meanwhile, the use of PEG₃₅₀ ligand retained the confined Cu in the polymer, demonstrating a chain-growth mechanism, but lower polymer molecular weights as compared with the no-external-ligand polymerization. Results indicated that aliphatic substituent groups on ligands had little effect on the molecular weights and DB of the polymers, but rigid aromatic substituent groups decreased both values. By varying the ligand species and amounts, hyperbranched polymers with DB value ranging from 0.53 ([TBTA]₀/[Cu]₀ = 5) to 0.98 ([PMDETA]₀/[Cu]₀ = 2) have been achieved. © 2018 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2018 , 56, 2238–2244     

Performance improvement of electrochromic display devices employing micro-size precipitates of tungsten oxide

In this paper, we studied the effect of micro-size WO₃ precipitates on the electrochromic characteristics based on aging test. The electrochromic mechanism can be effectively investigated by a solid-state TaN/WO₃/ITO capacitor. The experimental results reveal that WO₃ electrochromic devices with optimized aging time of 4 days exhibit a higher optical contrast and longer retention time, which is mainly attributed to the formation of micro-size WO₃ precipitates during aging process. The performance improvement using micro-size WO₃ precipitates has the potential in future large-area window or energy efficient display applications.     

玻璃与玻璃化转变

玻璃与玻璃态的应用极其广泛。玻璃化转变是一种典型的非晶液-固转变,当转变发生时体系的结构并没有明显变化,因而我们无法将其归类于已有的任何相变类型。作为凝聚态物理和软物质领域的核心问题,玻璃化转变的研究已有近70年的历史。然而,时至今日,人们还是无法回答玻璃态的本质是什么这一基本问题。本文简述了玻璃态的性质以及伴随玻璃化转变发生的一些基本物理现象,并总结了半个世纪以来一些与玻璃化转变相关的理论,以期加深读者对玻璃及玻璃化转变的认识。     

Experimental Study of Liquid Hydrocarbons Pyrolysis to Acetylene in H2/Ar Plasma

Liquid hydrocarbons including n-hexane, cyclohexane and toluene are pyrolyzed in H₂/Ar plasma to investigate the effects of feedstock properties and key operating conditions (e.g., the feedstock specific input power and residence time) on the reaction performance. The experiments verify that the non-aromatic hydrocarbons show better chemical reactivity than partially aromatic substances. Meanwhile, the straight-chain alkanes and cycloalkanes have better yields of ethylene during the pyrolysis. The results also demonstrate that the pyrolysis reactions are almost completed within the first 0.8?ms in Ar/H₂ plasma independent of the feed substances (i.e., liquid hydrocarbons), where the increased feedstock specific input power enhances the reactant conversions and correspondingly raises the yields of acetylene. At a feedstock specific input power of 4.7?×?10⁴?kJ/kg, the n-hexane conversion is over 90?% and the yield of acetylene reaches 70?%. In addition, when using n-hexane as the feedstock, very little coke is formed during the course of reaction. Comprehensive comparisons of the current experiments with the data reported in the literature are made to point out the key influencing factors, i.e., the effective mass ratio of C/H (R _C/H) in the gaseous phase and the quench temperature. Both two factors would need to be enhanced in order to get a better performance. Finally, the improvements on the specific energy requirement of this process are discussed.     

Room-temperature multiferroic properties of Co-doped KNbO3 ceramics

KNb_0.95Co_0.05O₃ (KN–Co) ceramic was prepared via a solid-state reaction method, and the effect of cobalt dopant on the structural, electric, and magnetic properties was studied. The KN–Co ceramic with polycrystalline perovskite structure exhibited ferromagnetic and ferroelectric properties simultaneously at room temperature, and the coupling of them was confirmed by a large magnetocapacitance effect (about 13%) near the Curie temperature. The possible causes for the magnetism and magnetoelectric properties are discussed.     

Removal of oxygen from silicon by electron beam melting

Small amounts of multicrystalline silicon were melted in an electron beam furnace in different experimental conditions in order to investigate the oxygen evaporation behavior during the electron beam melting (EBM) process. The oxygen content level before and after EBM was determined by secondary ion mass spectroscopy. The oxygen content was reduced from 6.177 to 1.629 ppmw when silicon was melted completely at 15 kW with removal efficiency up to 73.6 %. After that, it decreased continually to <0.0517 ppmw when the refining time exceeded 600 s with a removal efficiency of more than 99.08 %. During the melting process, the evaporation rate of silicon is 1.10 × 10^?5 kg/s. The loss of silicon could be reduced up to 1.7 % during oxygen removal process to a desirable figure, indicating EBM is an effective method to remove oxygen from silicon and decrease the loss of silicon.