“压力管道安全检测与评价技术研究”项目简介

该项目研究内容以压力管道安全保障为中心，在管道危险源辨识与安全状况等级评价、无损检测和结构完整性评估技术三个方面取得了突破性进展。突破了安全状况等级定量评价、薄壁和大曲率管道焊缝缺陷检测、复杂管系统结构完整性评估等技术难题，首次提出在用压力管道安全保障五大环节的全过程技术方法，系统建立了压力管道安全检测与评价方法体系，在压力管道事故预防技术领域实现了跨跃式发展。     

LD端抽运平直腔Nd:YVO4固态激光器的输出功率特性研究

对LD端抽运平直腔Nd:YVO₄固态激光器输出功率特性受激光器内在诸因素(热透镜效应、腔长、激活孔径等)的制约关系进行了研究.并用传播圆-变换圆图解分析方法给出了合理的解释，同时，对进一步提高其输出功率特性指出了方向. 关键词： 固体激光器 热透镜 变换圆 平直腔     

液态泡沫结构及其稳定性

液态泡沫由大量气泡密集堆积在少量的表面活性剂溶液中形成，是具有高度自组织结构的典型的软物质．文章从泡沫物理学角度简要介绍了液态泡沫的结构特征和稳定性方面的研究．     

Erratum: Yan Guo. Boltzmann diffusive limit beyond the Navier‐Stokes approximation,Communications on Pure and Applied Mathematics (2006) 59(5) 626‐687

The original article to which this erratum refers was published in Communications on Pure and Applied Mathematics Comm Pure Appl Math(2006)59(5) 626 .     

BEPCⅡ直线加速器重大改造和束流调试进展

BEPCⅡ直线加速器的重大改造旨在获得高流强、小发射度和小能散的正负电子束, 以满足对撞机亮度提高两个两级的要求. 这对直线加速器各系统和束流物理是一个挑战. 文章介绍了直接决定束流性能的新电子源、新正电子源、新微波功率源、相位控制系统和束流测量系统等的改造情况; 叙述了束流物理研究; 介绍了束流调试进展情况和进一步改进计划.     

G-网络排队系统的研究新进展

在研究排队网络的文献中,G-网络(即推广的排队网络)最近受到了国际学者广泛的关注,它的研究在一定程度上丰富了排队网络的内容.正因为有很多学者投入到此项研究中,新的结果是层出不穷的.本文简短地介绍G-网络近年来的发展.     

Effect of Alumina and Chromium Interlayers on Microstructures and Optical Properties of Thin Ag Films on Glass Substrates

Effects of alumina and chromium interlayers on the microstructure and optical properties of thin Ag films are investigated by using spectrophotometry, x-ray diffraction and AFM. The characteristics of Ag films in Ag/glass, Ag/l2O3/glass and Ag/Cr/glass stacks are analysed. The results indicate that the insertion of an Al2O3 or Cr layer decreases the grains and influences the reflectance of Ag films. The reflectance of the Ag film can be increased by controlling the thickness of alumina interlayer. The stability of Ag films is improved and the adhesion of Ag films on glass substrates is enhanced by alumina as an interlayer.     

随机截断下NA样本半参数回归模型中的相合估计

本文研究固定设计下的半参数回归模型在相应变量Yi因受到某种随机干扰而被右截断且截断分布已知时,利用所获的截断观察定义了参数β和回归函数g(·)的估计,并证明了它们均具有强相合性.     

Generation of red light at 660 nm by frequency doubling a Nd:YAG laser with periodically-poled stoichiometric LiTaO<Subscript>3</Subscript>

High power red light was generated from a periodically-poled stoichiometric LiTaO₃ (PPSLT) by single-pass frequency doubling of a diode-side-pumped, Q-switched Nd:YAG laser at 1319 nm. An average power of 2.4 W of the 660 nm red light was obtained at the fundamental power of ∼5.4 W with the conversion efficiency up to 44.4% and with low fluctuation down to 2%. The high efficiency and stability at the red output indicate that it is a practical method to construct a reliable compact red laser. PACS 42.70.Mp; 42.79.Nv; 42.55.Xi     

Structural characterization and ferromagnetic behavior of Fe-doped TiO2 powder by high-energy ball milling

Fe-doped TiO₂ powder was prepared by high-energy ball milling, using TiO₂ Degussa P-25 and α-Fe powders as the starting materials. The structure and magnetic properties of the Fe-doped TiO₂ powder were studied by X-ray diffraction, ⁵⁷Fe Mossbauer spectroscopy and vibrating sample magnetometer. The Reitveld refinement of XRD revealed that ball milling not only triggered incorporation of Fe in TiO₂ lattice but also induced the phase transformation from anatase to rutile in TiO₂ and consequently the milled Fe-doped TiO₂ powder contained only rutile.⁵⁷Fe Mössbauer effect measure showed that Fe atoms existed in Fe²⁺ and Fe³⁺ state, which were assigned to the solid solution Fe_xTi_1−xO₂. The magnetization measurements indicated that the milled Fe-doped TiO₂ powder was ferromagnetic above room temperature. The ferromagnetism in our milled Fe-doped TiO₂ powder seemingly does not come from Fe and iron oxides particles/clusters but from the Fe-doped TiO₂ powder matrices.