利用同步荧光光谱快速鉴别潲水油

为快速鉴别潲水油,采用三维同步荧光光谱结合平行因子法解析潲水油的特征波长差(Δλ),并利用支持向量机建立潲水油鉴别模型。结果表明,潲水油的特征Δλ为60 nm;特征Δλ下的样品原始同步荧光光谱经过主成分分析提取5个主成分,以径向基函数(RBF)为核函数,利用网格搜索和6-fold交叉验证优化建模参数,得到惩罚因子C=512、核参数g=0.5,该条件下建立的模型对训练集和预测集的判别率均达到100%。采用同步荧光光谱可以快速、准确地鉴别潲水油。     

Monte Carlo simulation of glandular dose in a dedicated breast CT system

A dedicated breast CT system (DBCT) is a new method for breast cancer detection proposed in recent years. In this paper, the glandular dose in the DBCT is simulated using the Monte Carlo method. The phantom shape is half ellipsoid, and a series of phantoms with different sizes, shapes and compositions were constructed. In order to optimize the spectra, monoenergy X-ray beams of 5-80 keV were used in simulation. The dose distribution of a breast phantom was studied: a higher energy beam generated more uniform distribution, and the outer parts got more dose than the inner parts. For polyenergtic spectra, four spectra of Al filters with different thicknesses were simulated, and the polyenergtic glandular dose was calculated as a spectral weighted combination of the monoenergetic dose.     

HIRFL数字化高频低电平控制系统研究

在HIRFL加速器系统中, 需要对射频加速电压的幅度和相位进行精确控制,以实现对重离子的精确俘获、 加速和引出。传统的幅度、相位稳定控制系统采用幅度和相位两个反馈闭合环路来分别稳定腔体电压的幅度和相位。 数字化高频低电平控制系统(LLRF) 基于可编程逻辑门阵列（FPGA）和数字信号处理（DSP）, 采用直接数字频率合成（DDS）与数字正交调制解调（I/Q）技术来实现对高频功率源的控制。 相位控制精度更高, 系统更加稳定。 目前控制系统在假负载上通过了长期稳定性的实验和高功率实验, 幅度偏差小于或等于±1％, 相位偏差小于或等于±0.5°。 In order to ensure that the beam quality is well enough, we need to precisely control the frequency, amplitude and phase of cavity electric field. Traditional control system consists of amplitude loop and phase loop. And these two loops control amplitude and phase stability respectively. The digital low level radio frequency (LLRF) system, which uses advanced digital control technology, needs only one feed back loop to control amplitude and phase stability. The phase control precision and stability of the system are higher than the traditional control system. The LLRF system is based on field programmable gate array (FPGA) and digital signal processing (DSP), and implemented by direct digital frequency synthesis (DDS) and digital orthogonal modulation and demodulation (I/Q) technology. The digital LLRF system has been tested in a long term stability and high power experiments. The amplitude deviation is lower than ±1%, and phase control accuracy is within ±1°.      

云层对卫星遥感大气CO的影响与修正方法研究

研究云层对卫星遥感大气CO精度的影响,并以SCIAMACHY观测为例,详细论述一种云层影响的修正方法。修正过程中,采用朗伯云模型,全面考虑云层覆盖率、云顶高度和地面反射率的影响。将云层影响修正前后的卫星CO反演结果与地基FTIR测量值进行对比,发现修正云层影响后,两者的测量相关性明显提高。实验结果表明,提出的云层影响修正方法可明显提高卫星遥感大气CO的精度。     

红外偏振成像对伪装目标的探测识别研究

针对目前普通光电成像系统对伪装目标的探测和识别概率较低的状况,提出伪装目标的探测识别新技术研究。介绍了红外偏振成像系统的原理、组成和特点,研制的中波/长波红外偏振成像装置,其波段范围为3 m ~5 m和8 m~12 m,线偏振度95%,消光比大于100∶1,给出了试验分析数据和偏振融合效果图。研究表明,采用红外偏振成像技术可以有效地实现对地面伪装目标的探测和识别。研究结果还可以扩展到对人工假目标、空中隐身目标等的探测和识别。     

Calculation of equation of state of QCD at zero temperature and finite chemical potential

In this paper we calculate the equation of state （EOS） of QCD at zero temperature and finite chemical potential by using several models of quark propagators including the Dyson-Schwinger equations （DSEs） model,the hard-dense-loop （HDL） approximation and the quasi-particle model.The results are analyzed and compared with the known results in the literature.     

六种蜂花粉的红外光谱三级鉴别研究

采用傅里叶变换红外光谱(FTIR)结合二阶导数谱和热扰动下的二维相关红外光谱技术对6种不同花粉,即杏花花粉、油菜花粉、茶花花粉、西瓜花粉、荷花花粉和虞美人花粉,进行了快速无损的鉴别。结果表明,在一维红外光谱图上,不同花粉的蛋白质、脂肪和糖类物质的特征吸收峰在相对峰强和峰位上均存在一定的差异,在二阶导数谱上差异很明显。而在二维红外谱图上,由于6种花粉的自动峰及相关峰峰簇的位置和数量不同,其差别体现得更为明显和直观。因此,三级红外宏观指纹图谱法是鉴别不同蜂花粉种类的一种有效和快速检测方法。     

高电压锯齿波聚束器的设计研制

近些年来,使用锯齿波直接形成的方法建造非谐振型聚束器在国内及国际均得到了广泛的应用。由于电子技术及机械加工工艺的飞速发展和更高功率电子管的出现,可以设计出更高指标的聚束器,进而可以有效提高束线的匹配效率及运行稳定度。对兰州重离子加速器源束线新的高电压锯齿波聚束器的研制进行了详细阐述,由于该聚束器具有目前国际同类型设备中最高的电压、频率以及相对苛刻的现场条件限制,故还对设计中所涉及的工程实施方案进行了有效补充和完善。     

Molecular-Dynamics Simulations of Droplets on a Solid Surface

By using a semi-empirical Lennard-Jones embedded-atom-method potential, we study the influence of many-body forces and atomic size mismatch on the wetting behavior of nano droplets on a solid surface. With molecular dynamics simulations, we find that the contact angle decreases with increasing many-body forces. The increase of atomic size mismatch between solid and liquid results in the decrease of contact angles. Our calculation also shows that the interface structure is strongly affected by the interaction between liquid and solid as well as the atomic size mismatch. For weak solid-liquid interaction, the interface layer of the droplet nearest to the solid exhibits a typical simple liquid structure regardless of the size mismatch. For strong solid-liquid interaction, evident ordering in the interface layer is observed for well matched cases.     

核磁自旋回波串的液体分量分解快速反演法(英文)

该文叙述核磁自旋回波串的液体分量分解快速反演法.此方法假定液体,无论是在散装形式或饱和多孔介质中,可以用一个或一组核磁弛豫线形来表征.对一维核磁共振的拉普拉斯反演,它可以是预先确定的一个或一组T2或T1分布.对二维核磁共振的拉普拉斯反演,它可以是一个或一组预先确定的( D, T2)或( T1, T2)二维分布.对三维核磁共振的拉普拉斯反演,它可以是一个或一组预先设定的( D, T1, T2)三维分布.这些预先确定的线形,可以是高斯、B样条或预先由实验或经验确定的任何线形.这种方法可以显着降低核磁共振数据反演的计算时间,特别是从石油核磁共振测井采集的多维数据反演,它不需牺牲反演所得的分布的平滑性和准确性.这种方法的另一个新应用是作为一种约束求解方法来过滤相邻深度所采集的数据噪音.核磁共振测井的噪音信号,往往造成在相邻深度的同一岩性岩层有不同的T2分布.在此情况下, T2分布就不能用来识别岩性.通过非一般的矩阵操作,作者成功实现了对相邻深度的回波串实施约束求解方法,从而使得T2分布成为一种可靠的岩性识别指标.