FORMATION AND DEVELOPMENT OF TAIHU LAKE AND RECENT DEPOSITION

Situated in the Taihu plain between the mouth of the Changjiang River and theHangzhou Bay, the Taihu Lake is a large shallow-water lake in China with a surface area of 2427.8 km~2.The lake bottom mainly consists of loess-like sediment. Some buried and silted up channels and residual depressions can be found at the bottom and a lot of Neolithic cultural relics on the loess-like sediment. This indicated that the Taihu Lake was formed on the alluvial plain charaterized by widely deposited loess-like sediment because of siltation and stagnancy of water, instead of by development from lagoons as reported in the past.Recent deposition including influent-effluent current accumulation, wind-driven current and storm deposition in this lake occurred mainly in the south, the west shore and the midst of the lake.The sedimentary rate in the east Taihu Lake is about 1.7-1.8 mm/a, whereas in the west Taihu Lake it is about 0.41 ram/a, only 23％ of that of the former.     

Cr/CeO2体系及其对乙烷脱氢反应催化性能的研究

The dehydrogenation reaction of ethane over Cr/CeO₂ catalysts in presence of CO₂ was studied with fixed-bed micro-reactor. The Cr/CeO₂ catalysts of different Cr loading have been synthesized using impregnation techniques. The Cr/CeO₂ system has already been found to be active and selective in the reaction at around 740 ℃. The function of carbon dioxide is to remove coke and hydrogen to accelerate dehydrogenation of ethane. The results of catalysts characterizations indicated that Cr³⁺ and Cr⁶⁺ occurred on the surface of the catalysts. The 1.2 mmol Cr/100m₂ CeO₂ catalyst sample with a monolayer dispersion of Cr on CeO₂ support showed a stronger surface acidity and a maximum yield of ethylene of about 35.5% at 36.6% conversion of ethane.     

QuEChERS-气相色谱-串联质谱法测定枸杞中农药残留

建立了QuEChERS-气相色谱-串联质谱法测定枸杞中农药残留的分析方法。样品经乙腈提取，采用乙二胺-N-丙基硅烷（PSA）、C18和石墨化炭黑（GCB）3种吸附剂净化，在多反应监测模式（MRM）下进行检测，基质外标法定量。结果显示，检测项目在5~500 μg/L范围内呈良好线性（R²>0.99），在3个添加水平下测得回收率为71.5%~109.7%，相对标准偏差（RSD）为1.94%~9.87%（n=6）。该方法灵敏度高、净化效果好，可同时快速检测有机磷类、有机氯类农药。     

单边裂纹聚苯乙烯样品拉伸断裂过程的声发射

本文测定了单边裂纹聚苯乙烯(PS)样品在拉伸加载时的声发射以及声发射事件按幅度、脉宽、计数和位置的分布,实验证实,单边裂纹PS样品拉伸时的声发射来源于裂纹端部银纹区的变形、断裂和扩展,大部分总振铃计数由裂纹亚临界和失稳扩展引起,在重复加载时观察到PS声发射的Kaiser效应。     

四苯基卟啉铂电致发光性能的研究

四苯基卟啉铂(PtTPP)可以作为红光掺杂材料制备有机电致发光器件，采用的器件结构为[ITO／CuPc／NPB／BePP2：PtTPP／LiF／Al]，其中BePP2：PtTPP的共沉积膜作为发射层．实验结果表明在发射层中存在着从BePP2到PtTPP的能量传递．通过改变掺杂层中PtTPP的浓度来考察器件的性能，当PtTPP的掺杂浓度在8％(物质的量比)时，器件呈现纯正的红光发射，发射峰位于668nm，器件的效率为0．004lm／W．     

水/油型微乳液中球形及棒状钛酸锶钡纳米粒子的控制合成

Barium strontium titanate nanoparticles with spherical and rod-like morphologies were synthesized in water/Triton X-100/n-hexanol/cyclohexane quaternary reverse microemulsion solution. The influences of the molar ratio of water to surfactant (ω₀) and the concentration of reactants on the morphology and size of barium strontium titanate nanoparticles were studied. The structure, compositions and morphology of the prepared products were characterized by XRD, SAED, ICP, EDS and TEM. The results show that the obtained Ba_0.7Sr_0.3TiO₃ spherical nanoparticles with diameters of 20～100 nm and the Ba_0.7Sr_0.3TiO₃ nanorods with diameters of 70～120 nm and lengths up to 600～800 nm are a single crystal, with a cubic phase. The molar ratio for barium, strontium and titanate in products is about 0.7:0.3:1.     

2,4-二吡啶基方酸衍生物非线性光学性质的从头算研究

采用HF/4-31G方法优化分子几何构型,在此基础上用CPHF研究了系列2,4-二吡啶基方酸衍生物的二阶非线性光学系数βvec,并对影响βvec的因素进行了探讨.结果表明:此类化合物均有很大的βvec,它们的非线性光学性质与其分子结构有着密切的关系.     

Studies on Artificial Imitation of Glutathione Peroxidase by Chemical Mutation

ＳｔｕｄｉｅｓｏｎＡｒｔｉｆｉｃｉａｌＩｍｉｔａｔｉｏｎｏｆＧｌｕｔａｔｈｉｏｎｅＰｅｒｏｘｉｄａｓｅｂｙＣｈｅｍｉｃａｌＭｕｔａｔｉｏｎＤＩＮＧＬａｎ；ＺＨＵＺｈｅｎ－ｑｉ；ＬＵＯＧｕｉ－ｍｉｎ；ＳＵＮＱｉ－ａｎ；ＹＡＮＧＴｏｎｇ－ｓｈｕａｎｄＳＨ...     

原子簇P12（D3d）的理论研究

利用Ｇａｕｓｓｉａｎ－９２程序在６－３１Ｇ基组下优化Ｐ１２（Ｄ３ｄ）构型，研究了３Ｐ４（Ｔｄ）→Ｐ１２（Ｄ３ｄ）的相对能量，计算结果为△Ｅ＝Ｅｐ１２（Ｄ３ｄ）－３Ｅｐ４（Ｔｄ）＝－７９．８４４ｋＪ／ｍｏｌ，优化Ｐ１２（Ｄ３ｄ）获得的Ｐ－Ｐ键键长接近于实验测得的Ｐ－Ｐ单键键长，并进一步在该基组下计算了Ｐ１２（Ｄ３ｄ）原子簇的振动频率，得到的全部为正频率，表明原子簇Ｐ１２的Ｄ３ｄ构型是位能面上的稳定点     

HYDROFORMYLATION CATALYSIS USING POLYMER-SUPPORTED MULTINUCLEAR RHODIUM CARBONYL CLUSTER CATALYSTS

A series of polymer-supported tetranuclear rhodium carbonyl cluster catalysts were prepared b the reaction of Rh_4(CO)_(12) with several kinds of polymer supports such as crosslinked poly (N-vinylpyrrolidone) (PNVP) and crosslinked poly ( styrene-co-maleic anhydride) (PMAn), and subsequently were used to catalyze the hydroformylation of olefins. The catalysts were characterized by IR, SEM and XPS. The influence of the supports structure and crosslinking, metal's content and particle size of the supports on the catalysts hydroformylation properties was studied. The factors which affect the catalytic conversion were also examined. The experimental results show that the polymer-supported Rh cluster catalysts possess very high catalytic activity and aldehyde selectivity as well as good reproducibility.