基于色调恒定的MSR图像增强算法

由于多尺度Retinex算法增强后图像存在细节信息减弱和颜色失真等不足,本文提出了一种色调恒定的图像增强算法.在原图像中去掉用多尺度高斯函数估计的光照分量,结合参量自适应的非线性函数调整亮度,依据色调恒定的理论保持增强后图像的颜色.与多尺度Retinex比较的实验结果表明,本文算法更有效,增强后的图像不仅细节清晰,而且...     

标准镜的高精度柔性支撑镜框的优化设计

为了实现干涉仪标准镜中光学元件的高精度定位,设计了一种柔性支撑镜框,研究了该结构的力学模型、结构参数、定位精度和透镜变形。首先,根据材料力学原理将柔性镜框等效为一个弹簧系统;根据力学方程和几何关系,建立了透镜中心位置与柔性结构的挠度之间的二元方程。然后,分析了安装位置、温度、结构参数对透镜位置以及作用力的影响。最后,应用有限元仿真分析了所设计结构的力学性能,并进行对比验证。结果表明,数值仿真分析的结果与有限元仿真结果基本相同,柔性镜框的柔性结构厚度最优值为1.5 mm。该设计方案完全满足干涉仪标准镜对镜框在定位精度、稳定性方面的要求。     

Study on inverse taper based mode transformer for low loss coupling between silicon wire waveguide and lensed fiber

We have simulated the coupling loss of three types of Inverse Taper and taper-lensed fiber using three dimensional (3D) semi-vectorial beam propagation methods (BPM) respectively. Our results showed that the performances of exponential inverse taper and quadratic inverse taper were better than the commonly used linear inverse taper. Especially, for TM mode the improvement in the reduction of devices size is 53% and 136% for exponential and quadratic inverse taper compared with the linear inverse taper.     

微通道换热器在制冷空调系统中的应用分析

2010年6月1日实施的新能耗标准进一步推动了制冷空调行业的升级,微通道换热器以其体积小、重量轻、结构紧凑、耐高压、热阻低、换热效果好等特点开始逐步在汽车制冷空调系统、家用和商用制冷空调系统中得以应用.然而,国内在该领域的研究比国外起步晚,理论和实验研究都比较缺乏.文中对微通道换热器在制冷空调系统中的应用研究进行了总结...     

300mm平面标准镜装卡结构的关键参数

为了实现大口径平面标准镜的高精结构装卡,对其在重力作用下的面形变化进行了研究。首先,对结构胶的有限元建模进行了理论分析,建立了大口径平面标准镜胶结装卡结构有限元模型。然后,分析了不同胶点数量及分布、不同胶接面积以及不同镜框支撑方式等关键结构参数对参考面面形的影响。最后,设计了大口径平面标准镜胶结及支撑的结构。结果表明,采用胶点直径为5 mm,12×3胶点分布形式胶结时,参考面面形的PV值为24.06 nm,RMS值为6.78 nm,满足了大口径平面标准镜面形精度的要求。     

不含三角形图的正常染色路和正常染色圈

图G为边染色图,对G中的任一顶点v,定义v的色度dc（v）：G中与顶点v相关联的边中不同染色的数目.用δc（G）表示图G的最小色度,即δc（G）=min{dc（v）：v∈G}.若图G为不含三角形的边染色图,且δc（G）≥2,则G含长为4d-2的正常染色路或长至少为2d-2的正常染色圈.     

The combination of TsNBr2/TsNH2 as the nitrogen/halo source for the aminobromination of β-methyl-β-nitrostyrenes catalyzed by Mn(OAc)2

The combination of N,N-dibromo-p-tolunesulfonamide (4-TsNBr₂) and TsNH₂ was found to be an efficient halogen/nitrogen source for the aminohalogenation of β-methyl-β-nitrostyrenes with manganese (II) acetate as the catalyst in the presence of 4 Å molecular sieves. The reaction results in vicinal bromoamino nitroalkanes with the opposite regioselectivity comparing with those reported, which was also confirmed by X-ray structural analysis.     

Experiment Research on a Highly Stable LD-pumped Solid State Laser

In high power laser systems, the stability of the seed laser is vitally important. This paper presents the work on the design and manufacture of a highly stable LD pumped solid state seed laser which has the advantages of being all solid state, compact, easy to manufacture and low cost. The laser was composed of two parts. One was an LD pumped 0.5 mm thin Nd: YLF laser system in which the instability was around±6% (3σ). The other was a close-looped laser power control system using external cavity power feedback. Using an electro-optic modulator, a 1×2 optical fiber splitter and a signal processing circuit, we successfully realized the highly stable LD pumped Nd: YLF laser in which the instability of laser output power was lower than±0.2 %/hour (3σ). A digital PID (Proportion, Integration and Differentiation) control method was used with a control frequency of 40 kHz. The 3 mW of highly stable laser power through the optical fiber was obtained.     

Automatic analysis of three-dimensional displacement field using ESPI

Electronic speckle pattern interferometry (ESPI) has been used to study the in-plane and out-of-plane displacements of the object. In order to improve the accuracy, a Fourier filtration algorithm has been used to remove the speckle noise and get the holographic-quality ESPI fringe pattern. The processing steps of this method are described in detail in this paper. In addition, a phase shifter, which is easily used with simplified structure and high stability, is also presented. It can be applied to various coherent arrangements in experiments to obtain phase shifted fringe patterns. Experiments of determining the 3D displacement field of a circular fixed plate with a uniform load have been carried out using these methods. The results presented in this paper indicate that the accuracy of this method is satisfactory.     

Stochastic first-order methods for convex and nonconvex functional constrained optimization

Mathematical Programming - Functional constrained optimization is becoming more and more important in machine learning and operations research. Such problems have potential applications in...