引发甲基丙烯酸甲酯聚合的聚丙烯酰胺－氯化铜配合物膜催化剂表征

考察甲基丙烯酸甲酯在室温Ｎａ２ＳＯ３水溶液的聚合能力，发现在该溶液添加聚丙烯酰胺（ＰＡＡｍ）－氯化铜（ＣｕＣｌ２）配合物膜以组成ＰＡＡｍ－ＣｕＣｌ２膜／Ｎａ２ＳＯ３催化引发体系是必不可少的．采用ＥＳＲ、ＩＲ、ＸＰＳ和电导率等手段研究该体系催化剂的表面结构．结果表明，膜的单位面积平均含铜量在一定范围内和配位体种类等对催化活性有显著影响，即催化性能与催化剂的表面结构紧密相关．     

The Purification of Glucose Type Glycosyl Nitrate and the Synthesis of Spacer—armed N—Acetyllactosamines and Their Dimers

Our previous paper1,2reported the results of selective synthesis of mannose type glycosides and their dimers in our attempt to synthesize derivatives of N-acetyllacto- samine, which could have potential activity of anti-metastasis3. Further studies on the glycosylation of the accepters exploiting glycosyl nitrate instead of the acetate as donor showed interesting chemoselectivity between the two kinds of donor, namely, the glucose type and the mannose type. The reactivity difference of the t…     

四萜Methyl Sartortuoate 的分离和NMR归属

从采自海南岛三亚的扭曲肉芝软珊瑚Sarcophyton tortuosum中分离得到3个新四萜和1个已知四萜methyl sar-tortuoate (1). 利用HMQC, ¹H-¹HCOSY, HMBC等二维NMR方法首次对methyl sartortuoate (1)的所有¹H, ¹³C NMR信号进行了完全的归属.     

拓扑指数法研究稀土显色剂结构与铈显色反应对比度的关系

计算了４３种不对称变色酸双偶氮膦酸型显色剂的Ａｍ拓扑指数，并将其与结构选择性因子相结合，用于偶氮类显色剂结构与铈显色反应对比度的相关性研究，讨论了显色剂结构对拓扑指数有译比度的影响。     

[Cu3(μ10-bta)(μ2-C2O4)(H2O)2]n的水热合成与结构表征

有机-无机杂化材料因其在催化、化学吸附、磁性和电子导体等方面具有广泛的应用而成为人们的研究热点[1,2]. 通过过渡金属离子和特殊的有机配体之间的反应, 一系列具有独特结构的配位聚合物已被合成出来. 多齿有机配体可螯合两个或多个金属离子, 这些金属离子之间存在良好的电子交换[3], 可形成一维、二维或三维的配位聚合物. 均苯三甲酸和均苯四甲酸都是良好的桥连多齿配体, Chui等采用均苯三甲酸合成了具有吸附作用的大孔道的[Cu3(tma)2(H2O)]n[4] (tma=benzene-1,3,5-tricarb-oxylate)三维配位聚合物, 并且[Ni(C12H3ON6O2)]3(tma)*H2O[5], [M(tma)2]*12H2O(M=Co,Ni,Zn)[6], Na2[Co(H2O)6(bta)]*4H2O[7] (bta=benzene-1,2,4,5-tetracarboxylate)和[Co(phen)(md)][8] (phen=1,10-phenanthroline, md=benzene-1,3-dicarboxylate)等配位聚合物也先后被合成出来.     

The Difference of Electronic Properties and the Effect of Hydrogen－bondofcis－and trans－Polyazomethine

ＴｈｅＤｉｆｆｅｒｅｎｃｅｏｆＥｌｅｃｔｒｏｎｉｃＰｒｏｐｅｒｔｉｅｓａｎｄｔｈｅＥｆｆｅｃｔｏｆＨｙｄｒｏｇｅｎ－ｂｏｎｄｏｆｃｉｓ－ａｎｄｔｒａｎｓ－ＰｏｌｙａｚｏｍｅｔｈｉｎｅＷＡＮＧＲｏｎｇ－ｓｈｕｎ，ＰＡＮＸｉｕ－ｍｅｉａｎｄＳＵＺｈｏｎｇ...     

N8H8链状异构体结构与稳定性的理论研究

采用密度泛函理论(DFT), 在B3LYP/6-311＋＋G(d,p)基组上计算得到了21种N₈H₈链状异构体, 并研究了这些异构体间可能的互变异构情况. 为了得到更为精确的能量信息, 计算了QCISD(T)/6-311G(d,p)基组水平上各物质的能量. 所得的21种异构体分为4类(4种类型链状化合物): A为直链, B有一个支链, C有2个支链, D有3个支链; D类只有一种, A类稳定构型2种, B类稳定构型12种, C类稳定构型6种; 相对稳定的分别为: B2-1构型, B2-3构型和C23-2构型. 我们研究发现N₈H₈链状异构体中含有明显N＝N双键特征有利于化合物稳定性的提高.     

镀金和碳纳米管修饰金电极上吸附态葡萄糖氧化酶比活性的EQCM研究

采用石英晶体微天平(EQCM)技术监测了裸金电极、镀金和碳纳米管修饰金电极上葡萄糖氧化酶(GOD)的吸附过程. 通过EQCM测量吸附固定的GOD质量, 并实时检测酶反应产物H2O2的氧化电量, 求算了各表面上吸附态GOD的比活性(ESAi). 结果表明, 各表面上均可吸附一定的GOD, 且吸附态GOD均有一定的酶活性; 修饰CNTs可增大酶吸附量和酶电极对葡萄糖的响应电流, 但ESAi随CNTs修饰量的增大而降低; Au电极上电镀金后, 酶吸附量和酶电极对葡萄糖的响应电流亦增大, 但ESAi与裸金电极上的基本一致.     

Extraction Kinetics of Rare Earth Elements with sec—Octyl—phenoxy Acetic Acid

ＩｎｔｒｏｄｕｃｔｉｏｎＩｔｉｓｗｅｌｌｋｎｏｗｎｔｈａｔｙｔｔｒｉｕｍｃａｎｂｅｕｓｅｄｉｎｍａｎｙｆｉｅｌｄｓ ,ｓｕｃｈａｓｍｅｔａｌｌｕｒｇｙ ,ｃｅｒａｍｉｃｓ ,ｌａｓｅｒｓａｎｄｅｌｅｃｔｒｏｎ ｉｃｓ ,ｅｓｐｅｃｉａｌｌｙｉｎｆｌｕｏｒｅｓｃｅｎｔｍａｔｅｒｉａｌｓｗｈｏｓｅｎｅｅｄｆｏｒｈｉｇｈｐｕｒｉｔｙｙｔｔｒｉｕｍｏｘｉｄｅｉｓｉｎｃｒｅａｓｉｎｇ .ＩｎＣｈｉｎａ ,ｔｈｅｒｅ ｓｏｕｒｃｅｏｆｙｔｔｒｉｕｍｉｓｒｉｃｈ ,ａｎｄｔｈｅｈｉｇｈｐｕｒｅｙｔｔｒｉｕｍｉｓｂｅ ｉｎｇｏ…     

离子液体中电沉积制备钴纳米线阵列

Porous anodic alumina (PAA) was used as a template to prepare Co nanowires array from 1-ethyl-3-methylimidazolium chloride ionic liquid by direct current method. The surface morphology of porous anodic alumina template was observed by field emission-scanning tunneling microscopy (FE-SEM) before and after the electrodeposition of Co nanowires. The electrodeposition of Co nanowires was characterized by transmission electron microscopy (TEM) and X-ray powder diffraction (XRD). TEM results indicate that the Co nanowire surface is coarse and porous when aqueous solution was used as electrolyte， and the Co nanowire deposited from the ionic liquid is uniform and smooth. XRD results show that the electrodeposition of Co is a mixture of crystal and microcrystal phase.