黄芩中锗的分光光度研究

对黄芩中的锗进行了分光光度法研究，结果表明，黄芩中含有丰富的有机锗。本方法简单可靠，可获得满意的分析结果。     

双层散射介质的单次后向散射光谱分析

从上皮组织的结构特点出发,基于米氏(Mie)散射理论,建立了双层散射介质的单次后向散射光谱的理论模型,该模型通过偏振门屏蔽来自下层的噪声背景,只保留来自上层的单次散射光。计算分析了粒子的形态学参量如平均尺寸及其分布、相对折射率变化时,单次散射光谱的特征。并用傅里叶波形分析法研究了这些参量对单次后向散射光谱曲线形状及其谐波幅值的影响。结果表明,这些只经历了表层粒子单次散射的光谱信号对表层粒子的平均尺寸及其分布、相对折射率具有灵敏性。对光谱曲线波纹结构的幅值、频率,散射强度,光谱谐波的幅值有直接的影响。研究结果对早期癌症的散射光谱特征识别及其特征提取有重要的实用价值。     

缩合法合成磁性荧光高分子CdTe@Fe_3O_4/P(NIPAM-co-AA)复合微球及其表征

具有超顺磁性和荧光特性的CdTe@Fe_3O_4/P(NIPAM-co-AA)多功能复合微球是以P(NIPAMco-AA)为模板制备而成.首先,采用溶胀法使模板微球带有磁性;其次,辅助TEOS和APTES两种化学试剂实现对Fe_3O_4/P(NIPAM-co-AA)微球表面的氨基功能化;最后,携带氨基的磁性微球与巯基乙酸修饰的CdTe量子点通过酰胺缩合反应,将量子点键合到磁性微球表面上,最终获得单分散的磁性荧光高分子复合微球.分别采用扫描电子显微镜、透射电子显微镜、倒置荧光显微成像系统、荧光分光光度计以及振动样品磁强计等方法对所获复合材料的结构与性能进行了表征.结果表明:复合微球单分散性良好,平均粒径约为30μm,饱和磁化强度可达5.4emu/g,具有良好的超顺磁性和较高的荧光发光效率.该材料将磁性、荧光结合到微米级高分子共聚物上,不仅解决了纳米粒子分离和处理的困难,而且奠定了多功能材料在生物标记、荧光成像等诸多领域潜在的应用基础.     

Klein–Nishina Effect and the Cosmic Ray Electron Spectrum

Radiative energy losses are very important in regulating the cosmic ray electron and/or positron(CRE) spectrum during their propagation in the Milky Way. Particularly, the Klein–Nishina(KN) effect of the inverse Compton scattering(ICS) results in less efficient energy losses of high-energy electrons, which is expected to leave imprints on the propagated electron spectrum. It has been proposed that the hardening of CRE spectra around 50 GeV observed by Fermi-LAT, AMS-02, and DAMPE could be due to the KN effect. We show in this work that the transition from the Thomson regime to the KN regime of the ICS is actually quite smooth compared with the approximate treatment adopted in some previous works. As a result, the observed spectral hardening of CREs cannot be explained by the KN effect. It means that an additional hardening of the primary electrons spectrum is needed. We also provide a parameterized form for the accurate calculation of the ICS energy-loss rate in a wide energy range.     

13CH4分子v3振动带空气和氮气加宽系数温度依赖性研究

采用中红外波段连续可调谐二极管激光器和自行研制的低温吸收池, 测量了温度为296 K, 252 K, 213 K, 173 K时, 3.38 μm附近¹³CH₄分子的四条跃迁谱线的氮气和空气加宽光谱; 首次通过实验获得空气和氮气对¹³CH₄分子的碰撞加宽系数, 以及谱线加宽系数的温度依赖系数. 实验过程中, 利用Voigt线型对所测量的光谱进行拟合. 实验结果表明, 氮气和空气对¹³CH₄分子的碰撞诱导加宽系数随温度的降低而增大; 相同温度下, 氮气对¹³CH₄分子的碰撞加宽系数普遍大于空气加宽系数. 实验数据为地球和外星体大气遥感探测提供了依据.     

颗粒滚动摩擦系数对堆积特性的影响

为探讨颗粒摩擦系数对堆积特性的影响,利用离散单元法,模拟静摩擦系数固定时,变化滚动摩擦系数对椭球形颗粒堆积角及堆积体的影响.利用自制斜面仪测定了颗粒静摩擦系数,并对滚动摩擦系数与堆积角建立线性方程.结果表明,滚动摩擦系数对颗粒堆积特性有显著影响,颗粒堆积角随滚动摩擦系数增大而增大,边界圆与连续圆间的间隙随滚动摩擦系数增大而减小.依据颗粒堆积过程中旋转动能的变化可以阐述上述结果,建立的滚动摩擦系数与堆积角的线性方程可为具体颗粒物料滚动摩擦系数的获取提供数值测量思路.模拟堆积的过程可为散体物料一些不易测量的参数进行虚拟实验标定.     

Investigation on improving characteristics of two-cell SBS system with CCl4/C2H5OH liquid mixture

In order to improve the performance of the two-cell stimulated Brillouin scattering （SBS） system, this paper proposes the methods of using mixtures, which require amplifier media to have small absorption rate, and generator media to have high optical breakdown threshold and Brillouin frequency shift equal to that of the amplification media. The characteristics of the two-cell SBS system are studied experimentally by using CCl4 as amplifier medium and CCl4, C2H5OH and CCl4/C2H5OH liquid mixture as generator medium pumped by Nd：YAG Q-switched laser. The obtained results show that liquid mixture in generator cell improves the power load ability, phase conjugation fidelity, energy reflectivity （ER） and ER stability.     

Highly efficient toughening effect of ultrafine full-vulcanized powdered rubber on poly(lactic acid)(PLA)

A unique ultrafine full-vulcanized powdered ethyl acrylate rubber (EA-UFPR) was used as the toughening modifier for poly (lactic acid) (PLA). Largely improved tensile toughness was successfully achieved with the incorporation of only 1 wt% EA-UFPR, while the tensile strength and modulus of the blends were almost the same as pure PLA. The highly efficient toughening of PLA by UFPR is mainly ascribed to the strong interfacial interaction between PLA and UFPR and good dispersion of UFPR particles in PLA matrix. Our work provides an effective toughening method to largely improve the mechanical properties of PLA without sacrificing its stiffness, which is very important for the wide application of PLA materials.     

Hierarchical nanostructured composite cathode with carbon nanotubes as conductive scaffold for lithium-sulfur batteries

Carbon nanotubes (CNTs) are excellent scaffolds for advanced electrode materials, resulting from their intrinsic sp2 carbon hybridization, interconnected electron pathway, large aspect ratio, hierarchical porous structures, and low cost at a large-scale production. How to make full utilization of the mass produced CNTs as building blocks for nanocomposite electrodes is not well understood yet. Herein, a composite cathode containing commercial agglomerated multi-walled CNTs and S for Li-S battery was fabricated by a facile melt-diffusion strategy. The hierarchical CNT@S coaxial nanocables exhibited a discharging capacity of 1020 and 740 mAh g-1 at 0.5 and 2.0 C, respectively. A rapid capacity decay of 0.7% per cycle at the initial 10 cycles and a slow decay rate of 0.14% per cycle for the later 140 cycles were detected. Such hierarchical agglomerated CNT@S cathodes show advantages in easy fabrication, environmentally benign, low cost, excellent scalability, and good Li ion storage performance, which are extraordinary composites for high performance Li-S battery.     

测量噪声对波前重构精度的影响

 Hartmann-Shack波前传感器斜率测量误差是自适应光学系统中影响波前重构精度的一个主要误差来源。针对模式法波前重构算法,推导出了普遍适用的模式法波前重构误差传递系数计算公式;利用61单元自适应光学系统中的Hartmann-Shack波前传感器测量的斜率数据,验证了模式法波前重构误差传递系数计算公式的正确性。