三级近似束流光学计算程序

为了精确计算束流在离子光学系统中的传输,用Visual FORTRAN 6.5语言编写了一个计算程序,长约13000行. 此程序可以计算由三圆筒单透镜、三膜片单透镜、双元筒透镜、均匀场静电加速管、磁四极透镜、六极磁铁、静电四极透镜、偏转磁铁、螺线管透镜、ExB~正交电磁场分析器、静电偏转器、漂浮管、QWR(Quarter Wave Resonators)和SLR(Split Loop Resonators)射频加速元件等元件任意组成的离子光学系统. 粒子轨迹的计算可精确到三级近似. 粒子的分布类型也可以有多种选择. 程序具有最优化计算功能,即可以自动调整元件的参数,以实现所需要的光学条件. 各元件之后的横向和纵向相图以及系统的束流包络线以图形方式显示在屏幕上.     

关于具有常平均曲率和数量曲率超曲面的Mbius几何的一个注记

设x:M→Sn 1(n≥3)是n 1-维单位球中的无脐点超曲面, Mobius不变量G,Φ,A和B分别表示x的Mobius度量, Mobius形式, Blaschke形式和Mobius第二基本形式．本文证明了如果x的Mobius形式Φ平行,并且A λG μB=0,其中λ,μ分别是定义在M上的光滑函数,那么Φ=0,由此及李海中、王长平(2003年)文献中的分类定理给出了Sn 1中具有平行的Mobius形式及满足A λG μB=0的超曲面的分类．此结果推广了他们及张廷枋(2003年)文献中的结果．     

Self-Assembly of Micro-Parts onto Si Substrates at Liquid-Liquid Interface

We report a new approach for the self-assembly of cuboid micro-parts onto Si substrates to construct three-dimensional microstructures. To perform assembly, the Si substrates are prepared with a deep cavity array as binding sites. An aggregate composed of hundreds of uniformly aligned micro-parts is formed at the C10F18-H2O interface. The micro-parts are arranged by passing the substrate through the aggregate of micro-parts, thus the micro-parts are left on the substrate, and then the substrate is vibrated ultrasonically in the solution, making it possible for the micro-parts to fall into the cavities on the substrate. Finally the substrate is pulled out of the solution after assembly. This technique could give a high yield of up to 70%, providing a new method for micro-assembly.     

ECR-SFC轴向注入系统聚束器效率的研究

为了减少目前SFC轴向注入系统中聚束器杂散电场对束流轴向注入效率的影响, 提高新系统中SFC的束流俘获效率, 参考原始设计, 对目前聚束器的电极结构进行了设计改进. 两种情况下的聚束器杂散场对注入效率影响的计算表明, 改进后0B02的聚束效率较目前有较大提高. 同时计算了束流空间电荷效应对聚束效率的影响, 据此对新SFC轴向注入系统中聚束器的位置进行了重新调整.     

Anisotropy in Third-Order Nonlinear Optical Susceptibility of a Squarylium Dye in a Nematic Liquid Crystal

A squarylium dye is dissolved in 4-cyano-4＇-pentylbiphenyl （SCB） and oriented by sandwiching mixtures between two pieces of rubbed glass plates. The optical absorption spectra of the oriented squarylium dye-5CB layers exhibit high anisotropy. The third-order nonlinear optical responses and susceptibilities X^（3）e of squarylium dye in 5CB are measured with light polarizations parallel and perpendicular to the orientational direction by the resonant femtosecond degenerate four-wave mixing （DFWM） technique. Temporal profiles of the DFWM signal of the oriented squarylium dye-5CB layers with light polarizations parallel and perpendicular to the orientational direction are measured with a time resolution of 0.3ps （FWHM）, and are found to consist of two components, i.e., the coherent instantaneous nonlinear response and slow response due to the formation of excited molecules. A high anisotropic ratio of x^（3）e, 10.8 ：k 1.2, is observed for the oriented layers.     

Magnetic Properties of Hf0.8Ta0.2（Fe0.97A0.03）2 （A=Al, Co, Mn） Systems

Moessbauer studies on the effect of substitution with 3% Al, Co, Mn atoms in the intermetallic compound of Hf0.8Ta0.2Fe2 are reported. The Al substitution leads to increase of the FM-AFM transition temperature and to decrease of the AFM-PM transition temperature. The Co substitution leads to disappearance of the FM state, only showing some FM impurity component, while Mn substituted compound indicates coexistence of FM and AFM states at low temperature. The phenomena imply complex itinerant electron properties in these magnetic systems.     

微量低电离电位的添加物对XeCl准分子激光输出的影响

本文报道在XeCl准分子激光器中添加微量的氯苯(C_6H_5Cl)或四氯化碳(CCl_4),使激光输出能量提高约16％。     

Impact of demand uncertainty on coordinating supply chain inventories through common replenishment epochs

Prior studies have shown that inventories in a one vendor, multi-buyer supply chain with deterministic demands can be coordinated effectively through the use of common replenishment epochs (CRE). In this paper, we study the impact of demand uncertainty on the effectiveness of coordinating such a supply chain. We develop a model to analyse the coordination mechanism using CRE in a one-vendor, multi-buyer supply chain, when the demand faced by the buyers is stochastic. Our numerical study based on the model found that coordination through CRE may not always be beneficial when the demand variance is high. We also investigate a strategy of advance order processing by the vendor to improve the effectiveness of coordination through CRE.     

Synthesis and application as polymer electrolyte of hyperbranched polyether made by cationic ring‐opening polymerization of 3‐{2‐[2‐(2‐hydroxyethoxy)ethoxy]ethoxymethyl}‐3′‐methyl‐oxetane

A novel cyclic ether monomer 3‐{2‐[2‐(2‐hydroxyethoxy)ethoxy]ethoxy‐methyl}‐3′‐methyloxetane (HEMO) was prepared from the reaction of 3‐hydroxymethyl‐3′‐methyloxetane tosylate with triethylene glycol. The corresponding hyperbranched polyether (PHEMO) was synthesized using BF₃·Et₂O as initiator through cationic ring‐opening polymerization. The evidence from ¹H and ¹³C NMR analyses revealed that the hyperbranched structure is constructed by the competition between two chain propagation mechanisms, i.e. active chain end and activated monomer mechanism. The terminal structure of PHEMO with a cyclic fragment was definitely detected by MALDI‐TOF measurement. A DSC test implied that the resulting polyether has excellent segment motion performance potentially beneficial for the ion transport of polymer electrolytes. Moreover, a TGA assay showed that this hyperbranched polymer possesses high thermostability as compared to its liquid counterpart. The ion conductivity was measured to reach 5.6 × 10^?5 S/cm at room temperature and 6.3 × 10^?4 S/cm at 80 °C after doped with LiTFSI at a ratio of Li:O = 0.05, presenting the promise to meet the practical requirement of lithium ion batteries for polymer electrolytes. © 2006 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 44: 3650–3665, 2006     

Synthesis of TiO2–SiO2/polymer core–shell microspheres with a microphase‐inversion method

A novel microphase‐inversion method was proposed for the preparation of TiO₂–SiO₂/poly(methyl methacrylate) core–shell nanocomposite particles. The inorganic–polymer nanocomposites were first synthesized via a free‐radical copolymerization in a tetrahydrofuran solution, and the poor solvent was added slowly to induce the microphase separation of the nanocomposite and result in the formation of nanoparticles. The average particle sizes of the microspheres ranged from 70 to 1000 nm, depending on the reaction conditions. Transmission electron microscopy and scanning electron microscopy indicated a core–shell morphology for the obtained microspheres. Thermogravimetric analysis and X‐ray photoelectron spectroscopy measurements confirmed that the surface of the nanocomposite microspheres was polymer‐rich, and this was consistent with the core–shell morphology. The influence of the synthetic conditions, such as the inorganic composition and the content of the crosslinking monomer, on the particle properties was studied in detail. © 2006 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 44: 3911–3920, 2006