Preparation and Mechanical and Tribological Properties of High-Density Polyethylene/Hydroxyapatite Nanocomposites

High-density polyethylene (HDPE) nanocomposites reinforced with hydroxyapatite nanorods (nHA) were fabricated by means of extrusion and injection molding. The thermal, mechanical, and dry sliding wear properties of HDPE-based nanocomposites filled with nHA loadings up to 20 wt% were investigated. The results of mechanical property characterization showed that nHA additions improved the hardness, elastic modulus, and yield strength of HDPE at the expense of its tensile ductility and impact strength. Thermogravimetric analysis and heat deflection temperature measurements revealed that nHA fillers are very effective to enhance the thermal stability of HDPE. The wear behavior of HDPE/nHA nanocomposites was studied using a pin-on-disk tribometer. nHA fillers of a large aspect ratio improved the wear resistance of HDPE substantially because of their load-bearing effect and the formation of a continuous transfer film on the steel counterface.     

The Mechanical Properties,Compatibility, and Thermal Stabilities of POE-Graft-Methyl Methacrylate and Acrylonitrile(POE-g-MAN)/ Styrene-Acrylonitrile Copolymer (SAN Resin) Blends

POE-graft-methyl methacrylate and acrylonitrile (POE-g-MAN) was prepared by graft copolymerization of methyl methacrylate (MMA) and acrylonitrile (AN) onto polyethylene-octene copolymers (POE) with suspension polymerization. POE-g-MAN/SAN resin blends (AOMS) were prepared by blending POE-g-MAN with styrene-acrylonitrile copolymer (SAN resin). The mechanical properties, compatibility, and thermal stabilities of AOMS were studied. The notched impact strength of the blends reached 54.0 kJ/m² when the AN/(MMA + AN) ratio (f_AN) of POE-g-MAN, benzoyl peroxide dosage, and POE content in AOMS were 15 wt%, 1.0 wt%, and 25 wt%, respectively. Transmission electron microscopy analysis showed that the highest toughness occurred when the size of POE-g-MAN particles and the surface-to-surface inter-particle distance were proper. Scanning electron microscopy analysis indicated that the AOMS fracture surface had plastic flow visible, which looked like a fibril morphology when the AN/(MMA + AN) ratio (f_AN) of POE-g-MAN was 15 wt%. The toughening mechanism of AOMS was shear yielding of the matrix, which endowed AOMS with remarkable toughness. Dynamic mechanical thermal analysis showed that the compatibility of the POE phase and SAN phase improved after graft copolymerization of MMA and AN onto POE. When the grafting chain polarity was appropriate, the miscibility between POE-g-MAN and SAN resin was the best. Thermogravimetry analysis showed that thermal stability of AOMS increased with increasing AN units in POE-g-MAN.     

Designing and Characterization of Biodegradable Multiblock Poly(L-Lactic Acid)/Polybutadiene Elastomers

A series of poly(L-lactic acid)/polybutadiene (PLA/PB) biodegradable multiblock elastomers was synthesized and characterized. A two-step process to prepare PLA/PB multiblock elastomers was applied. Melt polymerization was used to prepare poly(L-lactic acid) (PLA) terminated with hydroxyl groups and, at the same time, hydroxyl-terminated polybutadiene (HTPB) and 1,6-hexamethylene diisocyanate (HDI) were employed to synthesize diisocyanate-terminated polybutadiene (ITPB). Then, PLA and ITPB were reacted with different PLA/PB weight ratios. Consequently, a series of PLA/PB biodegradable poly(ester-urethane)s with crosslinked chains was obtained. Swelling characteristics and crosslink density of the crosslinked elastomer were investigated. DMA was applied to characterize its thermal properties. The measurement of mechanical properties showed that a PLA/PB elastomer with adjustable mechanical properties was synthesized. Micromorphology, hydrophobicity, and degradability of the material were also characterized.     

Graft Polymerization of Methyl Methacrylate- Acrylonitrile onto Poly(ethene-co-1-butene) and Its Toughening Effect on SAN Resin

Poly(ethene-co-1-butene)-graft-methyl methacrylate-acrylonitrile (PEB-g-MAN) was prepared by suspension grafting copolymerization of methyl methacrylate (MMA) and acrylonitrile(AN) onto PEB. PEB-g-MAN/SAN resin blends (ABMS) were prepared by blending PEB-g-MAN with styrene-acrylonitrile copolymer (SAN resin). The effects of AN/(MMA+AN) feed ratio (f_AN), PEB/(PEB+MMA+AN) feed ratio (f_PEB) and benzoyl peroxide (BPO) dosage on the monomer conversion ratio (CR), rubber's grafting ratio (GR), grafting efficiency (GE) of the copolymerization and the toughening effect of PEB-g-MAN on the SAN resin were investigated. FTIR quantitative analysis showed that when the weight percent of AN unit in the unextracted product was 21.5 wt% with f_AN of 25 wt%, the toughening effect of unextracted PEB-g-MAN on SAN resin was the highest. Gel permeation chromatography (GPC) analysis showed that when f_AN was 25 wt%, the grafted copolymer had the lowest molecular weight and ABMS had highest toughness. Transmission electron microscopy (TEM) analysis showed that the highest toughness occurred when the phase structure of ABMS was cocontinuous with f_AN of 25 wt%. When f_AN was 25 wt% PEB-g-MAN domains have numerous small SAN domains in them, which was occlusion structure. Scanning electron microscopy (SEM) analysis indicated that the ABMS fracture surfaces had plastic flow visible, which looked like a craze fibers morphology, for the sample with highest impact strength (f_AN = 25 wt%). Dynamic mechanical thermal analysis (DMA) showed that the miscibility of the PEB phase and SAN phase improved after graft copolymerization of MMA and AN onto PEB.     

Euler operator and homogeneous hida distributions

Let (S)⊄L ²(S′(∔),μ)⊄(S)^* be the Gel'fand triple over the white noise space (S′(∔),μ). Let (e _n ,n>-0) be the ONB ofL ²(∔) consisting of the eigenfunctions of the s.a. operator . In this paper the Euler operator Δ _E is defined as the sum , where ∂ _i stands for the differential operatorD _{e i}. It is shown that Δ _E is the infinitesimal generator of the semigroup (T _t ), where (T _t ϕ)(x)=ϕ(e ^t x) for ϕ∈(S). Similarly to the finite dimensional case, the λ-order homogeneous test functionals are characterized by the Euler equation: Δ _Eϕ =λ_ϕ. Via this characterization the λ-order homogeneous Hida distributions are defined and their properties are worked out. Supported by the National Natural Science Foundation of China.     

应变对纳米铜晶界迁移的影响

用分子动力学方法模拟了金属铜纳米双晶中晶界在应变作用下的迁移过程,晶界类型为〈11l〉倾侧∑19晶界。原子问相互作用力采用Finnis-Sinclair型EAM势计算。结果表明：平行于晶界方向的压应变可以促进晶界在相邻品界交互作用下发生迁移;垂直于晶界方向的压应变则不能对晶界迁移产生明显的效果。晶界迁移大致可分为两个阶段,前阶段晶界迁移缓慢,随晶界间距减小,晶界间交互作用加强,使晶界迁移显著加速。     

基于简单MOPA结构实现3.08 kW全光纤窄线宽线偏振激光输出

基于简单的主振荡功率放大结构,演示了一种高功率窄线宽线性偏振全光纤激光器,其最大输出功率为3.08 kW,3 dB线宽为0.2 nm。在整个功率缩放过程中,偏振消光比约为94%,光束质量M ²约为1.4。这是国内外首次实现3 kW全保偏光纤激光输出,与基于相位调制的窄线宽激光器相比,该激光器可实现近似的线宽,同时具有受激布里渊散射阈值高、系统结构简单、成本低等特点。     

钴掺杂MoSe2共生长中氢气的作用分析及磁电特性研究

采用原位共生长化学气相沉积法,以Co3O4、MoO3、Se粉末为前驱物,710℃下在SiO2衬底上生长掺钴MoSe2纳米薄片,分析讨论氢气含量对其生长及调节机理的影响.表面形貌分析表明,氢气的引入促进了成核所需的氧硒金属化合物以及横向生长中需要的CoMoSe化合物分子的生成;AFM(Atomic Force Microscope)结果表明氢气有利于生长单层二维超薄掺钴MoSe2.随着Co3O4前驱物用量的增加,样品的拉曼和PL(Photoluminescence)谱图分别表现出红移和蓝移现象,带隙实现从1.52—1.57 eV的调制.XPS(X-ray photoelectron spectroscopy)结果分析得到Co的元素组分比为4.4%.通过SQUID-VSM(Superconducting QUantum Interference Device)和器件电学测试分析了样品的磁电特性,结果表明Co掺入后MoSe2由抗磁性变为软磁性;背栅FETs器件的阈值电压比纯MoSe2向正向偏移5 V且关态电流更低;为超薄二维材料磁电特性研究及应用拓展提供了基础探索.