Effect of Cr implantation on structural and optical properties of AlN thin films

Molecular beam epitaxy (MBE) grown AlN thin layer on sapphire substrates have been implanted with Cr⁺ ions for various dose from 10¹³ to 10¹⁵ cm⁻². The analyses were carried out by an X-ray diffractometer (XRD), Raman spectroscopy, a spectrophotometer and spectroscopic ellipsometry (SE) for structural and optical analyses. E₂(high) and A₁(LO) Raman modes of AlN layer have been observed and analyzed. The behavior of Raman shift and the variation in intensity and in peak width of Raman modes as a function of ions flux are explained on the basis of chromium substituting aluminum atom and implantation-induced lattice damage. Both Raman and X-ray analyses reveal that the incorporation of chromium atoms increases in the host lattice with the increasing of Cr ions fluence. The band gap energy was determined by using transmission spectra. It was found that the band gap energy decreases as the ion dose increases. The band gap of the unimplanted AlN is 6.02 eV and it decreases down to 5.92 eV for the Cr⁺-implanted AlN with a ion dose of 1×10¹⁵ cm⁻². Optical properties such as optical constants of the samples were examined by using a spectroscopic ellipsometer. It was observed that the refractive index (n) decreases with the increasing of ion dose.     

Dalitz analysis of D0-->K(0)(S)pi(+)pi(-)

In e(+)e(-) collisions using the CLEO detector, we have studied the decay of the D0 to the final state K(0)(S)pi(+)pi(-) with the initial flavor of the D0 tagged by the decay D(*+)-->D0pi(+). We use the Dalitz technique to measure the resonant substructure in this final state and clearly observe ten different contributions by fitting for their amplitudes and relative phases. We observe a K(*)(892)(+)pi(-) component which arises from doubly Cabibbo suppressed decays or D0-D0; mixing.     

Ion acoustic solitary waves with adiabatic ions in magnetized electron-positron-ion plasmas

Linear and nonlinear ion acoustic waves in the presence of adiabatically heated ions in magnetized electron-positron-ion plasmas are studied. The Sagdeev potential approach is employed to obtain the energy integral equation in such a mulitcomponent plasma using fluid theory. It is found that electron density humps are formed in the subsonic region in magnetized electron-positron-ion plasmas. The amplitude of electron density hump is decreased with the increase of hot ion temperature in electron-positron-ion plasmas. However, the increase in positron concentration and obliqueness of the wave increases the amplitude of nonlinear structure. The increase in positron concentration also reduces the width of the nonlinear structure in a magnetized multicomponent plasma. The numerical solutions in the form of solitary pulses are also presented for different plasma cases. The results may be applicable to astrophysical plasma situations, where magnetized electron-positron-ion plasma with hot ions can exist.     

Synthesis of (R)-alpha-benzylmethionine: a novel rearrangement during alkylation of the Seebach (R)-methionine oxazolidinone

Alkylation of the enolate of the Seebach (R)-methionine oxazolidinone with benzyl bromide gave the expected benzylated product in low yield. The major product was a novel amine arising from oxazolidinone cleavage, decarboxylation, alkylation and finally hydrolysis. The rearrangement could be suppressed by using a more reactive electrophile or by using the N-Cbz instead of the N-benzoyl protecting group, and the required (R)-alpha-benzyl-methionine was obtained in 78% yield and in an enantiomeric ratio of 90:10.     

β-Octafluorinated tetrakis(ethoxycarbonyl)porphyrin

Tetrakis(alloxycarbonyl)porphyrin and its β-octafluoro-substituted derivatives were synthesized via Lindsey method and transformed to their zinc complexes.Single crystal X-ray structures of corresponding Zn(Ⅱ) porphyrins revealed that β-octafluorination will give more compactness of porphyrin moieties in the crystal structure owing to the hydrogen bonding interactions involving β-fluorine atoms.An unusual six-coordinated Zn(Ⅱ) was found via intramolecular coordination of oxygen atom of meso-substituents with central Zn(Ⅱ).     

Enhancing endothelial differentiation of human mesenchymal stem cells by culture on a nanofibrous polycaprolactone/(poly-glycerol sebacate)/gelatin scaffold

Cardiovascular diseases have always been one of the main causes of death worldwide and eventually one of the major medical concerns. Tissue engineering is promising strategies of treating cardiovascular, which can be an effective approach with the design of appropriate scaffold. In this study, to develop engineering basement membrane for endothelial differentiation with good cell attachment, we produced polycaprolactone (PCL)/poly (glycerol sebacate) (PGS)/gelatin nanofibrous scaffold via electrospinning. Attenuated total reflectance-Fourier transform infrared and the proton nuclear magnetic resonance results confirmed the chemical structure of synthesized PGS. Scanning electron microscope images of the electrospun scaffold revealed that the nanofibers are smooth, continues and uniform. Moreover, due to the presence of hydrophilic functional groups in the scaffold, the contact angle is in the appropriate range for cell adhesion especially endothelial cells. The elastic modulus and ultimate tensile stress of electrospun scaffold were calculated 1.32 ± 0.27 MPa and 1.23 ± 0.18 MPa respectively. Quantitative polymerase chain reaction was performed for evaluation of endothelial differentiation of mesenchymal stem cells cultured on standard plate and fibrous scaffold under chemical stimulation with growth factor. Specific endothelial gene expression results postulated that our modified scaffold could support and significantly promote endothelial differentiation of MSCs.     

Flatness,plateau limit and limit length of single-plateau functions

In this paper we consider iteration of single-plateau functions, an important class of continuous functions with infinitely many forts, and investigate changes of number and length of plateaux under iteration.We use the indices flatness, plateau limit and limit length to formulate those changes. Furthermore, we compute the flatness, plateau limit and limit length for all the nine types of single-plateau functions.     

Tuning the Triplet Excited State of Bis(dipyrrin) Zinc(II) Complexes: Symmetry Breaking Charge Transfer Architecture with Exceptionally Long Lived Triplet State for Upconversion

Zinc(II) bis(dipyrrin) complexes, which feature intense visible absorption and efficient symmetry breaking charge transfer (SBCT) are outstanding candidates for photovoltaics but their short lived triplet states limit applications in several areas. Herein we demonstrate that triplet excited state dynamics of bis(dipyrrin) complexes can be efficiently tuned by attaching electron donating aryl moieties at the 5,5′-position of the complexes. For the first time, a long lived triplet excited state (τ_T=296 μs) along with efficient ISC ability (Φ_Δ=71 %) was observed for zinc(II) bis(dipyrrin) complexes, formed via SBCT. The results revealed that molecular geometry and energy gap between the charge transfer (CT) state and triplet energy levels strongly control the triplet excited state properties of the complexes. An efficient triplet–triplet annihilation upconversion system was devised for the first time using a SBCT architecture as triplet photosensitizer, reaching a high upconversion quantum yield of 6.2 %. Our findings provide a blueprint for the development of triplet photosensitizers based on earth abundant metal complexes with long lived triplet state for revolutionary photochemical applications.     

Producing highly linear polyethylenes by using t‐butyl‐functionalized 2,6‐bis(imino)pyridylchromium(III) chlorides

A new family of t‐butyl substituted chromium(III) chloride complexes ( Cr1 – Cr6 ), bearing 2‐(1‐(2,6‐dibenzhydryl‐4‐t‐butylphenylimino)ethyl)‐6‐(1‐(arylimino)ethyl)pyridine (aryl = 2,6‐Me₂C₆H₃ Cr1 , 2,6‐Et₂C₆H₃ Cr2 , 2,6‐i‐Pr₂C₆H₃ Cr3 , 2,4,6‐Me₃C₆H₂ Cr4 and 2,6‐Et₂‐4‐MeC₆H₂ Cr5 ) or 2,6‐bis(1‐(2,6‐dibenzhydryl‐4‐t‐butylphenylimino)ethyl)pyridine ( Cr6 ), has been synthesized by the reaction of CrCl₃·6H₂O in good yield with the corresponding ligands ( L1 – L6 ), respectively. The molecular structures of Cr2 and Cr6 were characterized by X‐ray diffraction highlighted a distorted octahedral geometry with the coordinated N,N,N ligand and three bonded chlorides around the metal center. On activation with modified methylaluminoxane or triisobutyl aluminum, most of the chromium precatalysts exhibit good activities toward ethylene polymerization and produce linear polyethylenes with high‐molecular weight. In addition, an in‐depth catalytic evaluation of Cr2 was conducted to investigate how cocatalyst type and amount, reaction temperature, and run time affect the catalytic activities and polymer properties. © 2019 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2019 , 57, 1049–1058