Models for incomplete nucleophilic attack on a protonated carbonyl group and electron-deficient alkenes: salts and zwitterions from 1-dimethylamino-naphthalene-8-carbaldehyde

The X-ray crystal structures of salts and zwitterionic Knoevenagel products from 1-dimethylamino-naphthalene-8-carbaldehyde show long N-C bonds between peri-groups which provide models for incomplete nucleophilic attack on a protonated carbonyl group and electron-deficient alkenes respectively. For the salts the N-C bonds lie in the range 1.625-1.638 ? with C-OH bonds intermediate in length between single and double bonds, while for the zwitterions the N-C bonds lie in the range 1.612-1.660 ?. The structural assignment of the former is supported by solid state (13)C and (15)N NMR studies on doubly isotopically-labelled material. Several zwitterions were converted to naphtha[1,8-bc]azepines by a mechanism involving the tertiary amino effect.     

Second-order nonlinear optical properties of side-chain liquid crystalline polymers studied by second harmonic generation from thin films

The two independent elements of the second-order nonlinear optical susceptibility tensor of a range of contact poled, donor–acceptor substitued side-chain polymers are reported. The susceptibilities were measured by second harmonic generation from thin films, typically less than 0.5 μm thick, at a fundamental wavelength of 1064 nm. The largest value was χ = 2.64 pm/V which is three times greater than the χ value of KDP and was measured in a nitrobenzylidene side chain, polyhydroxystyrene polymer with an eleven unit alkyl chain spacer attaching the side group to the backbone. Typical susceptibility values obtained were χ～0.3 pm/V and X⁽²⁾₃₃～1 pm/V. The coherence lengths of the materials, which lay in the range 4–12 μm, were measured at 1064 nm by the maker fringe technique using thick, wedge-shaped samples.     

Microwave activation in ionic liquids induces high temperature-high speed electrochemical processes

Self-focusing of intense microwave radiation at the tip of a 25 microm diameter platinum disk microelectrode immersed into the ionic liquid 1-butyl-3-methylimidazolium hexafluorophosphate (BMIM(+)PF(6)(-)) containing 1 mM ferrocene causes dramatically (two orders of magnitude) enhanced voltammetric current signals and temperatures in excess of 600 K (at the electrode surface)--extreme conditions sufficient for condensed phase pyrolysis processes to occur.     

The structural characteristics of organozinc complexes incorporating N,N'-bidentate ligands

Dimethylzinc reacts with an excess of N-2-pyridylaniline 6 to give the homoleptic species, Zn[PhN(2-C(5)H(4)N)](2) 8. Single crystal X-ray diffraction reveals a solid-state dimer based on an 8-membered (NCNZn)(2) core motif. Zn[CyN(2-C(5)H(4)N)]Me (Cy =c-C(6)H(11)) 10, prepared by the combination of ZnMe(2) with the corresponding cyclohexyl-substituted pyridylamine, is also dimeric in the solid state but reveals a central (ZnN)(2) metallacycle. Employment of (p-Tol)NH(2-C(5)H(4)N)(p-Tol = 4-MeC(6)H(4)) 11 yielded the tris(zinc) adduct Zn(3)[(p-Tol)N(2-C(5)H(4)N)](4)Me(2) 12, which incorporates a central chiral molecule of 'Zn[(p-Tol)N(2-C(5)H(4)N)](2)' 12a, that bridges two 'Zn[(p-Tol)N(2-C(5)H(4)N)]Me' 12b units. A similar trimetallic structure is noted when the pyridylaniline substrate 11 is replaced with the bicyclic guanidine 1,3,4,6,7,8-hexahydro-2H-pyrimido[1,2-a]pyrimidine (hppH), affording Zn(3)(hpp)(4)Me(2) 13. Spectroscopic studies point to retention of the solid-state structure of in hydrocarbon solution. Reaction of 13 with dimesityl borinic acid, Mes(2)BOH (Mes = mesityl), affords Zn(3)(hpp)(4)(OBMes(2))(2) 14 in which the trimetallic core is retained. This reactivity is in contrast to the closely related reaction of dimeric Zn[Me(2)NC[N(i)Pr](2)]Me 15 with Mes(2)BOH, which yielded Zn[Me(2)NC[N(i)Pr](2)][OBMes(2)].Me(2)NC[N(i)Pr][NH(i)Pr] 16 as a result of protonation at the guanidine ligand in addition to the Zn-Me bond.     

Bi(III) halides as efficient catalysts for the O-acylative cleavage of tetrahydrofurans: an expeditious entry to tetralins

The mild (DCM/20 °C), quantitative, regioselective, O-acylative cleavage of tetrahydrofurans using organic acid halides with catalytic Bi(III) halides is reported. X-ray crystallography is used to rationalise the failure of the reaction in the case of certain crowded acid chlorides, and a useful aspect of chemoselectivity is revealed. The synthetic potential of this reaction is illustrated with a highly efficient O-acylative cleavage/intramolecular alkylation approach to tetralins.     

Examples of the ‘characteristic’ function applied to instrumental precision in chemical measurement

The ‘characteristic function’ with two empirically determined parameters α and β, is proposed as a general purpose function to describe the variation of precision (in terms of standard deviation σ), or uncertainty, with analyte concentration c (here denoting any compositional quantity), for specific analytical methods applied to a defined type of test material. In this study it is applied to examples of analytical data collected under ‘instrumental’ conditions for estimating precision. The function fitted the data well, with no systematic lack of fit. The study therefore extends the range of applications of this function.     

Enantiopure Ferrocene‐Based Planar‐Chiral Iridacycles: Stereospecific Control of Iridium‐Centred Chirality

Reaction of [IrCp*Cl₂]₂ with ferrocenylimines (Fc=NAr, Ar=Ph, p‐MeOC₆H₄) results in ferrocene C?H activation and the diastereoselective synthesis of half‐sandwich iridacycles of relative configuration S_p*,R_Ir*. Extension to (S)‐2‐ferrocenyl‐4‐(1‐methylethyl)oxazoline gave highly diastereoselective control over the new elements of planar chirality and metal‐based pseudo‐tetrahedral chirality, to give both neutral and cationic half‐sandwich iridacycles of absolute configuration S_c,S_p,R_Ir. Substitution reactions proceed with retention of configuration, with the planar chirality controlling the metal‐centred chirality through an iron–iridium interaction in the coordinatively unsaturated cationic intermediate.     

Reactivity of AlMe3 with titanium(IV) Schiff base complexes: X-ray structure of [Ti{(μ-Br)(AlMe2)}{(μ-Br)(AlMe2X)}(salen)] · C7H8 (X=Me or Br) and reactivity studies of mono-alkylated [Ti(Me)X(L)] complexes

[TiCl₂(salen)] (1) reacts with AlMe₃ (1:2) to give the heterometallic Ti(III) and Ti(IV) complexes [Ti{(μ-Cl)(AlMe₂)}{(μ-Cl)(AlMe₂X)}(salen)] (X=Me or Cl) (2) and [TiMe{(μ-Cl)(AlCl₂Me)}(salen)] (3). Addition of diethyl ether to 3 affords [Ti(Me)Cl(salen)] (4). The analogous reaction of [TiBr₂(salen)] (5) gives the crystallographically characterised [Ti{(μ-Br)(AlMe₂)}{(μ-Br)(AlMe₂X)}(salen)] (X=Me or Br) (6) and [Ti(Me)Br(salen)] (7) in a single step, whilst the comparable reaction of [TiCl₂{(3-MeO)₂salen}] (8) with AlMe₃ yields [Ti(Me)Cl{(3-MeO)₂salen}] (9) with no evidence of titanium(III) species. Reactivity of both halide and methyl groups of 4 has been probed using magnesium reduction, SbCl₅ and AgBF₄ halide abstraction and SO₂ insertion reactions. Hydrolysis of [Ti(Me)X(L)] complexes affords μ-oxo species [TiX(L)]₂(μ-O) [X=Cl, L=salen (13); X=Br, L=salen (14); X=Cl, L=(3-MeO)₂salen (15)].     

Hybrid catalysts: the synthesis, structure and ethene polymerisation activity of (salicylaldiminato)(pyrrolylaldiminato) titanium complexes

The mono(salicylaldiminato) complexes Ti{3-tBu-2-(O)C6H3CH=N(R)}Cl3(THF)(where R = C6H5, C6F5) react with the metallated pyrrolylaldiminato ligand, K[2-(C6H5NCH)C4H3N], to afford the first examples of hybrid salicylaldiminato-ligated octahedral titanium complexes; the pre-catalysts give from very high to extremely high ethene polymerisation productivities when activated with MAO.     

The synthesis, structure and ethene polymerisation catalysis of mono(salicylaldiminato) titanium and zirconium complexes

The silyl ethers 3-But-2-(OSiMe3)C6H3CH=NR (2a-e) have been prepared by deprotonation of the known iminophenols (1a-e) and treatment with SiClMe3 (a, R = C6H5; b, R = 2,6-Pri2C6H3; c, R = 2,4,6-Me3C6H2; d, R = 2-C6H5C6H4; e, R = C6F5). 2a-c react with TiCl4 in hydrocarbon solvents to give the binuclear complexes [Ti{3-But-2-(O)C6H3CH=N(R)}Cl(mu-Cl3)TiCl3] (3a-c). The pentafluorophenyl species 2e reacts with TiCl4 to give the known complex Ti{3-But-2-(O)C6H3CH=N(R)}2Cl2. The mononuclear five-coordinate complex, Ti{3-But-2-(O)C6H3CH=N(2,4,6-Me3C6H2)}Cl3 (4c), was isolated after repeated recrystallisation of 3c. Performing the dehalosilylation reaction in the presence of tetrahydrofuran yields the octahedral, mononuclear complexes Ti{3-But-2-(O)C6H3CH=N(R)}Cl3(THF) (5a-e). The reaction with ZrCl4(THF)2 proceeds similarly to give complexes Zr{3-But-2-(O)C6H3CH=N(R)}Cl3(THF) (6b-e). The crystal structures of 3b, 4c, 5a, 5c, 5e, 6b, 6d, 6e and the salicylaldehyde titanium complex Ti{3-But-2-(O)C6H3CH=O}Cl3(THF) (7) have been determined. Activation of complexes 5a-e and 6b-e with MAO in an ethene saturated toluene solution gives polyethylene with at best high activity depending on the imine substituent.