Chiral separation of anionic and neutral compounds using a hepta-substituted cationic beta-cyclodextrin as a chiral selector in capillary electrophoresis

Enantiomeric separations of six anionic and two neutral racemates were achieved using a fully substituted heptakis(6-hydroxyethylamino-6-deoxy)-beta-cyclodextrin (beta-CD-EA) as a chiral selector. As beta-CD-EA provides a dynamic coating on the capillary wall, reverse-polarity capillary electrophoresis (CE) configuration is applied for separations of anionic and neutral chiral compounds. Chiral separations of various classes of anionic and neutral enantiomers were found to be highly dependent on pH because the degree of protonation of beta-CD-EA can alter the shape of the CD cavity by charge repulsion, altering complexation, aiding selectivity, and leading to better enantiomeric separation. In general, the chiral resolution of anionic enantiomers was enhanced at higher pH. This suggests that carboxylate or phosphate groups on the analyte may interact with the protonated amine groups of cationic CD. The successful enantioseparation was achieved in a pH range of 6.6-7.8 for all six anionic analytes, in the presence of 10 mM beta-CD-EA.     

Headspace solvent microextraction and gas chromatographic determination of some polycyclic aromatic hydrocarbons in water samples

Headspace solvent microextraction (HSME) was shown to be an efficient preconcentration method for extraction of some polycyclic aromatic hydrocarbons (PAHs) from aqueous sample solutions. A microdrop of 1-butanol (as extracting solvent) containing biphenyl (as internal standard) was used in this investigation. Extraction occurred by suspending a 3 μl drop of 1-butanol from the tip of a microsyringe fixed above the surface of solution in a sealed vial. After extraction for a preset time, the microdrop was retracted back into the syringe and injected directly into a GC injection port. The effects of nature of extracting solvent, microdrop and sample temperatures, stirring rate, microdrop and sample volumes, ionic strength and extraction time on HSME efficiency were investigated and optimized. Finally, the enrichment factor, dynamic linear range (DLR), limit of detection (LOD) and precision of the method were evaluated by water samples spiked with PAHs. The optimized procedure was successfully applied to the extraction and determination of PAHs in different water samples.     

Synthesis and application of a nanoporous ion‐imprinted polymer for the separation and preconcentration of trace amounts of vanadium from food samples before determination by electrothermal atomic absorption spectrometry

A vanadium ion‐imprinted polymer was synthesized in the presence of V(V) and N‐benzoyl‐N‐phenyl hydroxyl amine using 4‐vinyl pyridine as the monomer, ethylene glycol dimethacrylate as the cross linker and 2,2’‐azobis(isobutyronitrile) as the initiator. The imprinted V(V) ions were completely removed by leaching the polymer with 5 mol/L nitric acid, and the polymer structure was characterized by Fourier transform infrared spectroscopy and scanning electron microscopy. The ion‐imprinted polymer was used as the sorbent in the development of the solid‐phase extraction method for V(V) prior to its determination by electrothermal atomic absorption spectrometry. The maximum sorption capacity for V(V) ions was 26.7 mg/g at pH 4.0. Under the optimum conditions, for a sample volume of 150.0 mL, an enrichment factor of 289.0 and a detection limit of 6.4 ng/L were obtained. The developed method was successfully applied to the determination of vanadium in parsley, zucchini, black tea, rice, and water samples.     

Development of liquid phase microextraction method based on solidification of floated organic drop for extraction and preconcentration of organochlorine pesticides in water samples

A simple and efficient liquid-phase microextraction (LPME) in conjunction with gas chromatography-electron capture detector (GC-ECD) has been developed for extraction and determination of 11 organochlorine pesticides (OCPs) from water samples. In this technique a microdrop of 1-dodecanol containing pentachloronitrobenzene (internal standard) is delivered to the surface of an aqueous sample while being agitated by a stirring bar in the bulk of solution. Following completion of extraction, the sample vial was cooled by putting it into an ice bath for 5 min. Finally 2 μL of the drop was injected into the GC for analysis. Factors relevant to the extraction efficiency were studied and optimized. Under the optimized extraction conditions (extraction solvent: 1-dodecanol; extraction temperature: 65 °C; sodium chloride concentration: 0.25 M; microdrop and sample volumes: 8 μL and 20 mL respectively; the stirring rate: 750 rpm and the extraction time: 30 min), figures of merit of the proposed method were evaluated. The detection limits of the method were in the range of 7-19 ng L⁻¹ and the RSD% for analysis of 2 μg L⁻¹ of OCPs was below 7.2% (n = 5). A good linearity (r² ≥ 0.993) and a relatively broad dynamic linear range (25-2000 ng L⁻¹) were obtained. After 30 min of extraction, preconcentration factors were in the range of 708-1337 for different organochlorine pesticides and the relative errors ranged from −10.1 to 10.9%. Finally the proposed method was successfully utilized for preconcentration and determination of OCPs in different real samples.     

Extraction and determination of organophosphorus pesticides in water samples by a new liquid phase microextraction-gas chromatography-flame photometric detection

A rapid, sensitive and efficient liquid phase microextraction (LPME) method was developed to determine trace concentrations of some organophosphorus pesticides in water samples. This method combines liquid phase microextraction with gas chromatographic (GC) analysis in a simple and inexpensive apparatus involving very little organic solvent consumption. It involves exposing a floated drop of an organic solvent on the surface of aqueous solution in a sealed vial. Experimental parameters which control the performance of LPME such as type of organic solvent, organic solvent and sample volumes, sample stirring rate, sample solution temperature, salt addition and exposure time were investigated and optimized. Finally, the enrichment factor, dynamic linear range (DLR), limit of detection (LOD) and precision of the method were evaluated by the water samples spiked with organophosphorus pesticides. Using optimum extraction conditions, very low detection limits (0.01-0.04 μg L⁻¹) and good linearities (0.9983 < r² < 0.9999) were achieved. The LPME was performed for determination of organophosphorus pesticides in different types of natural water samples and acceptable recoveries (96-104%) and precisions (3.5 < R.S.D.% < 8.9) were obtained. The results suggested that the newly proposed LPME method is a rapid, accurate and effective sample preparation method and could be successfully applied for extraction and determination of organophosphorus pesticides in water samples.     

On-line metals preconcentration and simultaneous determination using cloud point extraction and inductively coupled plasma optical emission spectrometry in water samples

A new on-line cloud point extraction (CPE) system coupled to ICP-OES was designed for simultaneous extraction, preconcentration and determination of Cd²⁺, Co²⁺, Cr³⁺, Cu²⁺, Fe³⁺ and Mn²⁺ ions in water samples. This is based on the complexation of the metal ions with 1-(2-thenoyl)-3,3,3-trifluoraceton reagent (TTA) at pH 6.0 in the presence of non-ionic surfactant of Triton X-114. The micellar solution was heated above 60 °C and loaded through a column packed with cotton, which acts as a filter for retaining the analyte-entrapped surfactant-rich phase. Then the surfactant-rich phase was eluted using propanol:0.5 mol L⁻¹ nitric acid solution (75:25, v/v) at a flow rate of 3.0 mL min⁻¹ and directly introduced into the nebulizer of the ICP-OES. Several factors influencing the instrumental conditions and extraction were evaluated and optimized. Under the optimum conditions, the enhancement factors of the proposed method for target ions were between 42 and 97, the detection limits (DLs) were in the range of 0.1-2.2 μg L⁻¹. The relative standard deviations (R.S.D.s) at 100 μg L⁻¹ concentration levels of each ion were found to be less than 4.6%. Also, the calibration graphs were linear in the range of 0.5-100 μg L⁻¹ with the correlation coefficients within the range of 0.9948-0.9994.Finally, the developed method was successfully applied to the extraction and determination of the mentioned metal ions in the tap, well, sea and mineral water samples and satisfactory results were obtained.     

Glycine-based polymeric surfactants with varied polar head group: I. synthesis, characterization, and application in micellar electrokinetic chromatography

The monomers and polymers of four anionic amide type sodium undecenoxy carbonyl glycinate (SUCG) surfactants and four anionic carbamate type sodium undecenoyl glycinate (SUG) surfactants with 1-, 2-, 3-, and 4-glycine unit as head group were synthesized and characterized. The CMC and aggregation number (A) for all eight surfactants were determined using fluorescence spectroscopy. In addition, the CMC values of these surfactants were also projected by surface tension and CE. The CMC of the monomers decreases with increases in the size of glycine head groups and correlates well when the fluorescence method was compared to CE. The A number increases and partial specific volume (V) decreases with increase in size of the head group of both monomers and polymers. However, A and V are always lower for the polymers than the corresponding monomers. The electrophoretic and chromatographic parameters of micelle polymers of SUG and SUCG were also examined. The coefficient of EOF increases with the increase in size of the head group but the electrophoretic mobility decreases which results in a decrease in the elution range. The retention data suggest that the selectivity differences among the mono-, di-, and tripeptide derivatives of poly-SUCG surfactants are relatively higher compared to the derivatives of poly-SUG series.     

Preparation of ion-imprinted polyvinyl sulfonate-grafted silica particles for trace enrichment of Th(IV) prior to determination by inductively coupled plasma-mass spectrometry

Grafting from polymerisation technique has been used to prepare Th(IV) ion-imprinted polyvinyl sulfonate (IIPVS)-bonded silica particles. The graft polymerisation of vinyl sulfonate (VS) on the surface of silica particles was achieved in aqueous medium through thermal decomposition of surface-bound azo initiators (60°C) in the presence of thorium ion. The prepared material was characterised by Fourier transform infrared spectroscopy, differential scanning calorimetry and thermogravimetric analysis. The entrapped template ion was then removed using 2 M HCl. The experimental batch rebinding data were successfully described by the Langmuir–Freundlich model. The prepared material was then packed to a PTFE micro-column (20 mm × 3.0 mm, id) to evaluate its efficiency in column operations prior to determination by inductively coupled plasma-mass spectrometry (ICP-MS). The limit of detection of the method and breakthrough capacity of the column was evaluated as 0.074 µg L^?1 and 0.83 mg g^?1, respectively. The selectivity of the prepared polymer towards Th(IV) ion was investigated in the presence of some foreign competitor ions, including U(VI). Finally, the proposed method has been used to determine Th(IV) ion in real samples.     

Separation of short and medium-chain fatty acids using capillary electrophoresis with indirect photometric detection: Part I: Identification of fatty acids in rat feces

Short and medium-chain fatty acids (SMCFAs) are known as essential metabolites found in gut microbiota that function as modulators in the development and progression of many inflammatory conditions as well as in the regulation of cell metabolism. Currently, there are few simple and low-cost analytical methods available for the determination of SMCFA. This report focuses on SMCFA analysis utilizing CE with indirect photometric detection (CE-IPD). A ribonucleotide electrolyte, 5’-adenosine mono-phosphate (5’-AMP), is investigated as an IPD reagent due to its high molar absorptivity and dynamic reserve compatible with separation and detection of SMCFA. The operating parameters like the composition of organic solvent, millimolar concentrations of the complexing agent (alpha-cyclodextrin), 5’-AMP and non-absorbing electrolyte (boric acid), as well as the applied voltage, are optimized for resolution, efficiency, and signal-to-noise ratio. A baseline resolution of all nine SMCFAs is achieved in less than 15 min. Additionally, the developed CE-IPD method shows promising potential to identifying SMCFA in rat fecal supernatant. The presented analytical assay is simple, economical, and has considerably good repeatability. The intraday and interday RSD of less than 1 and 2% for relative migration time, as well as less than 14 and 15% for peak area, respectively, were obtained for SMCFA in fecal solution.     

Numerical simulation of nanofluid turbulent flow in a double-pipe heat exchanger equipped with circular fins

Journal of Thermal Analysis and Calorimetry - In this study, the thermal and flow characteristics of a nanofluid were evaluated numerically in a circular finned double-pipe heat exchanger. A 3D CFD...