电沉积条件对锌镀层织构的影响

采用ＸＲＤ方法研究添加剂，络合剂，以及电流密度对锌酸盐镀锌层的织构和晶粒尺寸的影响，结果表明，添加剂ＡＡ－１的存在有利于（１０１）晶面取向；而ＤＩＥ则使镀层转变为１１０择优；两种添加剂同时存在下，可在一定的电流密度范围内获得高择优取向的锌镀层，而当又有络合剂ＴＥＡ和ＥＤＴＡ同时存在时，则可在更宽广的电流密度范围内制得日 粒细密、表面光亮、择优系数ＴＣ（１１０）在９８５以上的高择优取向锌沉积层。     

2-甲基-6-对甲苯基-1,6-庚二烯的合成

以对甲苯乙酮(1)为原料,经烯醇硅醚化,Lewis酸催化Michael加成反应和Wittig反应,合成了新倍半萜烯化合物2-甲基-6-对甲苯基-1,6-庚二烯。     

PVC/PBD-b-PMMA共混体系相容性的研究

采用ＤＭＡ和ＴＥＭ系统研究了聚丁二烯－聚甲基丙烯酸甲酯的嵌段共聚物（ＰＢＤ－ｂ－ＰＭＭＡ）与聚氯乙烯（ＰＶＣ）共混体系的相容性问题。结果表明：ＰＶＣ／ＰＢＤ－ｂ－ＰＭＭＡ共混体系具有部分相溶性。相容的程度与共混体系的组成、组分聚合物的分子量以及共聚物中ＰＢＤ和ＰＭＭＡ嵌段的比例密切相关。     

溶液盐效应的气液色谱研究

本文将气液色谱法用于测定环丁砜含盐溶液中以烃、芳烃、氯代烃、醇和酮为溶质的盐效应常数,结果表明,大多数溶质的盐效应关系可用Setschenow方程描述;负离子的性质对盐效应的影响比正离子更重要;负离子的电子向氯代烃中氯原子3d空轨道的迁移作用对其k_s的影响很大。     

人造芥子油中异硫氰酸烯丙酯与硫氰酸烯丙酯的气相色谱分析

采用２ｍ×３ｍｍ玻璃柱，涂布０．５％ＥＧＡ的８０～１００目ＧａｓｃｈｒｏｍＱ为固定相，以异辛醇为内标物，分析芥子油中异硫氰酸烯丙酯与硫氰酸烯丙酯异构体。该方法既可用于人造芥子油的含量分析，也可用于市售芥子油的质量鉴定。     

CT联合血清HCY、β2-M在下肢动脉狭窄闭塞性疾病中的诊断价值

本文对CT联合血清同型半胱氨酸（HCY）、β2-微球蛋白（β2-M）在下肢动脉狭窄闭塞性疾病中的诊断价值进行分析。选取上海市金山区中西医结合医院收治的120例疑似下肢动脉狭窄闭塞性疾病患者进行研究，选取同期健康体检者120例作为对照组，对患者进行CT检查、血清HCY和β2-M水平检查，并比较了CT诊断下肢动脉狭窄闭塞情况、两组患者血清HCY和β2-M水平，以明确CT、HCY、β2-M诊断价值及误诊率、漏诊率。结果显示，120例疑似患者中，CT检测出646节段病变血管，其中轻度狭窄155节段，中度狭窄257节段，重度狭窄143节段，血管完全闭塞91节段；研究组患者血清HCY、β2-M水平明显高于对照组，两组比较差异有统计学意义（P<0.05）；HCY的AUC为0.863，截断值>21.75（μmol/L），诊断敏感性为79.00%，特异性为80.00%，β2-M的AUC为0.837，截断值>2.98（μmol/mL），诊断敏感性为75.25%，特异性为65.21%；CT诊断阳性率为67.50%，HCY诊断阳性率为69.17%，β2-M诊断阳性率为67.50%，三者联合诊断阳性率为82.50%，联合诊断阳性率高于CT、HCY、β2-M单独诊断阳性率（P<0.05）；CT、HCY、β2-M单一检测对下肢动脉狭窄闭塞性疾病均有较高灵敏度、特异性及准确度，但三者联合诊断灵敏度、特异性及准确度最高，误诊率、漏诊率最低。本文证实了采用CT联合血清HCY、β2-M诊断下肢动脉狭窄闭塞性疾病诊断灵敏度、特异性及准确度高，误诊率、漏诊率低。     

Synthesis,structure and stereochemistry of diiodide complexes (E)[(η5-t-BuC5H3)Fe(CO)2I]2 (E = Me2Si,Me2SiSiMe2, and Me2SiOSiMe2)

Reactions of diiron complexes (E)[⁵-t-BuC₅H₃)Fe(CO)]₂(-CO)₂ [E = Me₂Si (1), Me₂SiSiMe₂ (2), and Me₂SiOSiMe₂ (3)] with iodine in CHCl₃ yielded diiodide complexes (E)[⁵-t-BuC₅H³)Fe(CO)₂I]₂ [E=Me₂Si (5), Me₂SiSiMe₂ (6), and Me₂SiOSiMe₂ (7)]. Like (1–3), complexes (5–7) also exists as mixtures of cis and trans isomers even though the Fe–Fe bond in (1–3) has been cleaved. When the pure isomers (1–3) reacted with iodine respectively in CHCl₃, the cis isomers (1c–3c) yielded only the cis products (5c–7c), whereas the trans isomers (1t–3t) yielded only the trans isomers (5t–7t). This indicates that iodination of bridged diiron complexes is stereospecific. Similar treatment of trans-(Me₂Si)[{⁵-t-(heptyl)C₅H₃}Fe(CO)]₂(-CO)₂ (4t) with iodine gave only the trans product (Me_2Si)[{⁵-t-(heptyl)C₅H₃}Fe(CO)₂I]₂ (8t). The molecular structure of (5t) was determined by X-ray diffraction.     

聚甲基苯基硅氮硅氧烷-鈀络合物结构的X-射线光电子能谱(XPS)研究

<正> 近年来,高分子金属催化剂由于其特殊的高分子效应引起人们广泛关注,目前在国外市场上已有高分子金属催化剂商品供应,它较低分子有机金属催化剂活性更高,选择性更好,并已广泛用于加氢,硅氢加成,转化,醛化,分解,齐聚,聚合和不对称合成等很多反应中,然而对其结构的研究至今报道甚少。     

Interaction of zinc finger ZNF191(243—368) and its I323 W and R327W mutants with oligonucleotides by florescence spectrum

Two mutants of the zinc finger protein, ZNF191 (243–368) I323W and R327W, are successfully obtained by site-directed mutagenesis. The fluorescence spectrum is used to study the interaction between these two mutants and the oligonucleotides. The influence of the mutation on the interaction has been studied using ethidium bromide (EB) as the fluorescence probe. The binding constants of the I323W-DNA and R327W-DNA have been calculated and the possible binding models have been discussed.     

Kinetic mechanism of methanol decomposition on Ni(111) surface: a theoretical study

The decomposition of methanol on the Ni(111) surface has been studied with the pseudopotential method of density functional theory-generalized gradient approximation (DFT-GGA) and with the repeated slab models. The adsorption energies of possible species and the activation energy barriers of the possible elementary reactions involved are obtained in the present work. The major reaction path on Ni surfaces involves the O-H bond breaking in CH(3)OH and the further decomposition of the resulting methoxy species to CO and H via stepwise hydrogen abstractions from CH(3)O. The abstraction of hydrogen from methoxy itself is the rate-limiting step. We also confirm that the C-O and C-H bond-breaking paths, which lead to the formation of surface methyl and hydroxyl and hydroxymethyl and atom hydrogen, respectively, have higher energy barriers. Therefore, the final products are the adsorbed CO and H atom.