新型热反应大分子单体的合成与表征

溶液法合成了一些低分子量的羟端基低聚苯醚砜,并由相转移催化剂将之转为热反应大分子单体——α,ω-双甲基丙烯酸聚苯醚砜酯;用FTIR、~1H-NMR对其结构进行了表征,GPC、VPO对其分子量进行了分析和测定;用DSC、DTA对聚苯醚砜双烯大分子单体的转变温度、热反应过程进行了测定和分析。     

测定水性聚氨酯树脂平均相对分子质量及其分布的高效凝胶渗透色谱法

选用HP PL gel MIXED-B柱双柱串联，四氢呋喃作流动相，紫外吸收检测器测定了水性聚氨酯树脂的平均相对分子质量及其分布；通过一系列的条件试验，确定了最佳的凝胶色谱（GPC）条件，结果令人满意；该研究有助于了解水性聚氨酯树脂性能，有效地指导工艺生产和基础研究。     

草酸电还原制取乙醛酸的研究

研究了由草酸电解还原制备乙醛酸时，温度、草酸纯度、电解时间、电极状态和电解产物对电流效率和产率的影响。实验发现，除温度和原料纯度是重要的影响因素外，电极表面的有机物吸附和电解产物－乙醛酸的浓度具有更大的影响。     

Determining PPARγ-ligand binding affinity using fluorescent assay with cis-parinaric acid as a probe

Upon the study of small-molecules binding to proteins, the traditional methods for calculating dissociation constants (Kd and Ki) have shortcomings in dealing with the single binding site models. In this paper, two equations have been derived to solve this problem. These two equations are independent of the total concentration or initial degree of saturation of receptor and the activity of the competitive molecule. Through nonlinear fitting against these two equations, Kd value of a probe can be obtained by binding assay, and Ki value of a ligand can be obtained by competitive assay. Moreover, only the total concentrations of receptor([R]t), ligand([L]t) and probe([P]t) are required for the data fitting. In this work, Ki values of some typical ligands of PPARγ were successfully determined by use of our equations, among which the Ki value of PPARγ-LY171883 was reported for the first time.     

Ring-opening Polymerization of e-Caprolactone Using Lanthanide Tris(4-tert-butylphenolate)s as a Single-component Initiator

The ring-opening polymerization of e-caprolactone (CL) initiated by novel single lanthanide tris(4-tert-butylphenolate)s [Ln(OTBP)3] is reported. Single-component La(OTBP)3 can effectively prepare polycaprolactone (PCL) with over 90% yield and viscosity average molecular weight about 60 x 10 under quite mild conditions: molar ratio of CL to initiator is 1000, 60 C, 2 h in toluene. Mechanism study indicates that the monomer inserts into the growing chain via the break of acyl-oxygen bond of CL.     

A New Application of Carbon Nanotubes Constructing Biosensor

Carbon nanotubes used for constructing biosensor was described for the first time. Single-wall carbon nanotubes (SWNTs) functionalized with carboxylic acid groups were used to immobilize glucose oxidase forming a glucose biosensor. The biosensor response can be determined by amperometric method at a low applied potential (0.40V).     

手性双氨基醇-Et2Zn催化的不对称直接羟醛缩合反应

以1,3-二溴丙酮和(2'S)-(二苯基羟甲基)-四氢吡咯为原料,合成了两种新型手性氨基醇1,3-双[(2'S)-(二苯基羟甲基)-1-四氢吡咯基]丙酮(3)和1,3-双[(2'S)-(二苯基羟甲基)-1-四氢吡咯基]-2-丙醇(4),总产率分别为39%和35%.手性双氨基醇3-/4-Et2Zn可催化未修饰醛、酮的不对称直接羟醛缩合反应,对映体过量最高9%.     

溶剂聚合膜pH电极作内电极的气敏电极的研究

研究了以中性载体为活性物的石墨内导平头溶剂聚合膜(SPM)pH电极作内电极的二氧化碳和氨气敏电极。电极的性能取决于中性载体的特性,其中以菸酸十八酯为内电极膜活性物的二氧化碳气敏电极和以二辛基十八胺为活性物的氨气敏电极性能较佳。二氧化碳气敏电极用作丙酮酸脱羧酶酶电极的原电极,其性能院于传统的以玻璃pH电极作内电极的二氧化碳气敏电极。     

INTRAPARTICLE DIFFUSION EFFECTS IN FISCHER-TROPSCH SYNTHESIS Ⅰ. MODELING OF DIFFUSION AND REACTION

IntroductionCatal}ticrcactionsaffcctcdb}'diffosionaIlimitationincatal}'stporcshavcbccnextensive1}dcaltx`ithinlit.rat.rcll~5I.Scvcraltcchniqucsonthcspccialcase0fFischcr-Tropschs}'nthcsis(FTS)t\crcapplicdtocxplorcthebchaviorofthiscatal}ticrcactionundercxpcrimcntalandopcrationaIconditionsI3~5l.It`"ouldbeofvaluctoindicatchcrcthatthcseinvcstigationsx"ercmainl}'bascdonthesimplcstkineticsofthcfirstordcrinH2proposedbyAndersonl6]attheearIystages.However-thesetboents,striCtlyspeaking,areinvalidfor…     

纳米/微米碳酸钙的结构表征和热分解行为

采用棕榈酸对纳米碳酸钙进行有机表面改性, 运用SEM﹑TEM、XRD、FTIR 及TG-DTG 对表面改性前后的纳米碳酸钙进行表征, 并与微米碳酸钙的微晶结构及热分解特性进行比较. FTIR 分析结果确证了棕榈酸与纳米碳酸钙表面是以化学键合和物理吸附方式相结合, 粒子表面存在羧基等有机官能团的红外吸收特征. 对比研究发现, 碳酸钙微晶纳米化后, 其红外V3特征吸收峰出现约35 cm-1 的蓝移现象, 并且明显窄化. 初步解释了纳米碳酸钙红外吸收峰蓝移的原因, 认为尺寸效应和晶体场效应是影响纳米碳酸钙红外光谱特征的主要因素. 微晶结构的变化使得纳米碳酸钙的热分解反应表现出反常特性, 热分解温度较微米碳酸钙下降了40.6 ℃.