硫代核苷类似物合成研究进展

4′-硫代核苷类似物是核糖环中的氧原子被硫原子取代的核苷类似物。许多硫代核苷具有良好的抗病毒和抗肿瘤活性。4′-硫代核苷具有更稳定的糖基键和针对各种病毒或细胞酶的代谢稳定性的提升等固有优点。因此,对硫代核苷类似物的设计与合成,筛选出安全有效的抗病毒试剂应受到更多药物化学家们的关注,本文综述了近年来硫代核苷的合成研究进展。     

In situ Carbon Modification of g-C3N4 from Urea co-Crystal with Enhanced Photocatalytic Activity Towards Degradation of Organic Dyes Under Visible Light

An in situ strategy was introduced for synthesizing carbon modified graphitic carbon nitride(g-C₃N₄) by using urea/4-aminobenzoic acid(PABA) co-crystal(PABA@Urea) as precursor materials. Via co-calcination of the PABA co-former and the urea in PABA@Urea co-crystals, C guest species were generated and compounded into g-C₃N₄ matrix in situ by replacing the lattice N of the carbon nitride and forming carbon dots onto its layer surface. The carbon modification dramatically enhanced visible-light harvesting and charge carrier separation. Therefore, visible light photo-catalytic oxidation of methylene blue(MB) pollution in water over the carbon modified g-C₃N₄(C/g-C₃N₄) was notably improved. Up to 99% of methylene blue(MB) was eliminated within 60 min by the optimal sample prepared from the PABA@Urea co-crystal with a PABA content of 0.1%(mass ratio), faster than the degradation rate over bare g-C₃N₄. The present study demonstrates a new way to boost up the photocatalysis performance of g-C₃N₄, which holds great potential concerning the degradation of organic dyes from water.     

Boosting Photocatalytic Oxygen Evolution: Purposely Constructing Direct Z-Scheme Photoanode by Modulating the Interface Electric Field

Ti-Fe₂O₃ photoanode has received widespread attention in photoelectrochemical(PEC) water spilling because of its optimized oxidative and reductive capability of composites catalyst. However, its low efficiency could limit its development. Herein, in order to improve the efficiency of PEC water spilling, the all-solid-state direct Z-scheme Ti-ZnFe₂O₄/Ti-Fe₂O₃(TZFO/Ti-Fe₂O₃) nanorod arrays composited with the ideal energy band structure are synthesized by modulating the Fermi level of TZFO for PEC water splitting. The photophysical methods in this work, including the Kelvin probe measurement and transient photovoltage spectroscopy(TPV) measurement, are applied to explore the migration behavior of electric charges at the enhanced interface electric field. Finally, the Z-scheme charge transfer mechanism of TZFO/Ti-Fe₂O₃ photoanode is proved successfully. Benefiting from the desirable charge transfer at interface electric field, the TZFO/Ti-Fe₂O₃ exhibits the outstanding photocatalytic oxygen evolution reaction(OER) performance, and the photocurrent of 60TZFO/Ti-Fe₂O₃ photoanode reaches 2.16 mA/cm² at 1.23 V vs. reversible hydrogen electrode(RHE), which is three times higher than that of pure Ti-Fe₂O₃ photoanode. This work provides a facile approach of modulating interface electric field to optimize the Z-scheme charge-transfer process.     

Controlling the Microstructure of Conjugated Polymers in High‐Mobility Monolayer Transistors via the Dissolution Temperature

It remains a challenge to precisely tailor the morphology of polymer monolayers to control charge transport. Herein, the effect of the dissolution temperature (T_dis) is investigated as a powerful strategy for morphology control. Low T_dis values cause extended polymer aggregation in solution and induce larger nanofibrils in a monolayer network with more pronounced π–π stacking. The field‐effect mobility of the corresponding monolayer transistors is significantly enhanced by a factor of four compared to devices obtained from high T_dis with a value approaching 1 cm² V^?1 s^?1. Besides that, the solution kinetics reveal a higher growth rate of aggregates at low T_dis, and filtration experiments further confirm that the dependence of the fibril width in monolayers on T_dis is consistent with the aggregate size in solution. The generalizability of the T_dis effect on polymer aggregation is demonstrated using three other conjugated polymer systems. These results open new avenues for the precise control of polymer aggregation for high‐mobility monolayer transistors.     

A Photowelding Strategy for Conductivity Restoration in Flexible Circuits

Light‐driven micropumps, which are based on electro‐osmosis with the electric field generated by photocatalytic reactions, are among most attractive research topics in chemical micromotors. Until now, research in this field has mainly been focused on the directional motion or collective behavior of microparticles, which lack practical applications. In this study, we have developed a photowelding strategy for repeated photoinduced conductivity recovery of cracked flexible circuits. We immersed the circuit in a suspension of conductive healing particles and applied photoillumination to the crack; photocatalysis of a predeposited pentacene (PEN) layer triggered electro‐osmotic effects to gather conductive particles at the crack, thus leading to conductivity recovery of the circuit. This photowelding strategy is a novel application of light‐driven micropumps and photocatalysis for conductivity restoration.     

Visualization and In Situ Ablation of Intracellular Bacterial Pathogens through Metabolic Labeling

Protected by the host cells, the hidden intracellular bacteria are typically difficult to kill by common antibiotics and cannot be visualized without complex cellular pretreatments. Herein, we successfully developed a bacteria‐metabolizable dual‐functional probe TPEPy‐d ‐Ala, which is based on d ‐alanine and a photosensitizer with aggregation‐induced emission for fluorescence turn‐on imaging of intracellular bacteria in living host cells and photodynamic ablation in situ. Once metabolically incorporated into bacterial peptidoglycan, the intramolecular motions of TPEPy‐d ‐Ala are inhibited, leading to an enhanced fluorescent signal, which allows the clear visualization of the intracellular bacteria. Moreover, TPEPy‐d ‐Ala can effectively ablate the labeled intracellular bacteria in situ owing to covalent ligation to peptidoglycan, yielding a low intracellular minimum inhibitory concentration (MIC) of 20±0.5 μg mL^?1, much more efficient than that of a commonly used antibiotic, vancomycin.     

Aggregation‐Induced Emission: Recent Advances in Materials and Biomedical Applications

The concept of aggregation‐induced emission (AIE) has opened new opportunities in many research fields. Motivated by the unique feature of AIE fluorogens (AIEgens), during the past decade, many AIE molecular probes and AIE nanoparticle (NP) probes have been developed for sensing, imaging and theranostic applications with excellent performance outperforming conventional fluorescent probes. This Review summarizes the latest advancement of AIE molecular probes and AIE NP probes and their emerging biomedical applications. Special focus is to reveal how the AIE probes are evolved with the development of new multifunctional AIEgens, and how new strategies have been developed to overcome the limitations of traditional AIE probes for more translational applications via fluorescence imaging, photoacoustic imaging and image‐guided photodynamic/photothermal therapy. The outlook discusses the challenges and future opportunities for AIEgens to advance the biomedical field.     

Enriched Surface Oxygen Vacancies of Photoanodes by Photoetching with Enhanced Charge Separation

A facile photoetching approach is described that alleviates the negative effects from bulk defects by confining the oxygen vacancy (O_vac) at the surface of BiVO₄ photoanode, by 10‐minute photoetching. This strategy could induce enriched O_vac at the surface of BiVO₄, which avoids the formation of excessive bulk defects. A mechanism is proposed to explain the enhanced charge separation at the BiVO₄ /electrolyte interface, which is supported by density functional theory (DFT) calculations. The optimized BiVO₄ with enriched surface O_vac presents the highest photocurrent among undoped BiVO₄ photoanodes. Upon loading FeOOH/NiOOH cocatalysts, photoetched BiVO₄ photoanode reaches a considerable water oxidation photocurrent of 3.0 mA cm^?2 at 0.6 V vs. reversible hydrogen electrode. An unbiased solar‐to‐hydrogen conversion efficiency of 3.5 % is realized by this BiVO₄ photoanode and a Si photocathode under 1 sun illumination.     

Preparation of Ag/C fiber with nanostructure through in situ thermally induced redox reaction between PVA and AgNO3 and its catalysis for 4‐nitrophenol reduction

A novel synthesized Ag/C fibrous catalyst based on in situ thermally induced redox reaction of PVA/AgNO₃ composite fibers was proposed. Utilizing the plasticization and complexation of AgNO₃ solution, the melt spinning of PVA/AgNO₃ composites was accomplished. Through the in situ thermally induced redox reaction on PVA/AgNO₃ composite fibers combined with carbonization of PVA and reduction of Ag+, the synthesized Ag/C fibrous catalyst was prepared with nanosilver particles with average diameter of 130 nm immobilized on the loose microstructural carbon layers. The synthesized Ag/C fibrous catalyst exhibited excellent catalytic activity and reused for at least five cycles for the reduction of 4‐nitrophenol, which may hold great promise in effective and eco‐friendly waste water treatment.     

Wearable Multiparameter Platform Based on AlGaN/GaN High‐electron‐mobility Transistors for Real‐time Monitoring of pH and Potassium Ions in Sweat

Biosensors based on field‐effect transistor (FET) structures have attracted considerable attention because they offer rapid, inexpensive parallel sensing and ultrasensitive label‐free detection. However, long‐term repeatable detection cannot be performed, and Ag/AgCl reference electrode design is complicated, which has hindered FET biosensors from becoming truly wearable health‐monitoring platforms. In this paper, we propose a novel wearable detection platform based on AlGaN/GaN high‐electron‐mobility transistors (HEMTs). In this platform, a sweatband was used to continuously collect sweat, and a pH detecting unit and a potassium ion detecting unit were formed by modifying different sensitive films to realize the long‐term stable and repeatable detection of pH and potassium ions. Experimental data show that the wearable detection platform based on AlGaN/GaN HEMTs has good sensitivity (pH 3–7 sensitivity is 45.72 μA/pH; pH 7.4–9 sensitivity is 51.073 μA/pH; and K⁺ sensitivity is 4.94 μA/lgα_K⁺), stability (28 days) and repeatability (the relative standard deviation (RSD) of pH 3–7 sensitivity is 2.6 %, the RSD of pH 7.4–9 sensitivity is 2.1 %, and the RSD of K⁺ sensitivity is 7.3 %). Our newly proposed wearable platform has excellent potential for predictive analytics and personalized medical treatment.