撞击流中颗粒碰撞传热理论模型研究

建立了考虑颗粒接触面导热的颗粒碰撞传热模型,相应完善了气固两相撞击流理论模型,并对不同条件的撞击流干燥过程进行了模拟。计算结果与实验结果非常吻合,从而验证了所建模型的正确性。本文还分析了颗粒碰撞传热、加料方式以及喷嘴间距对撞击流干燥性能的影响规律。结果表明:在本文所涉及的撞击流干燥过程中,颗粒碰撞传热对干燥性能的影响并不明显;单边加料时颗粒物料的降水幅度及撞击流装置的干燥强度都明显大于双边加料的工况;喷嘴间距较大时,物料的降水幅度及装置的干燥强度均较大。     

Efficient continuous-wave eye-safe region signal output from intra-cavity singly resonant optical parametric oscillator

We report an efficient continuous-wave (CW) tunable intra-cavity singly resonant optical parametric oscillator based on the multi-period periodically poled lithium niobate and using a laser diode (LD) end-pumped CW 1064 nm Nd:YVO₄ laser as the pump source. A highly efficiency CW operation is realized through a careful cavity design for mode matching and thermal stability. The signal tuning range is 1401-1500 nm obtained by varying the domain period. The maximum output power of 2.2 W at 1500 nm is obtained with a 17.1 W 808 nm LD power and the corresponding conversion efficiency is 12.9%.     

适用于非常规工作环境中热释电型激光能量计的研制

现有的激光能量计传感器灵敏度系数都与其所处环境温度有关,在-50℃～70℃的温度范围内,灵敏度偏差较大,直接影响测量结果。为了达到消除环境温度的影响,采取在不同环境温度下对热释型能量计的灵敏度进行校准的研究方法。该校准方法与普通激光能量计的校准方法的不同之处在于对热释电型能量计进行校准时,温度由室温扩展到-50℃～70℃的温度范围。利用环境试验箱,每隔10℃固定一个温度点,进行激光能量的测量实验,得到各个温度点所对应的灵敏度修正系数,再借助最小二乘法建立起各个温度点上能量计灵敏度系数同环境温度的函数关系,从而实现了-50℃～70℃的温度范围内激光能量的准确计量。研制能直接工作于非常规工作环境下的热释电型激光能量计,对解决激光能量测量的外场需求有一定现实意义。     

Zig-Zag板条泵浦的2.12μm激光器

 为了实现窄脉宽、高峰值功率2.12 μm激光的稳定输出,设计了基于侧面泵浦Zig-Zag 板条产生1.06 μm基频光,进而泵浦KTP晶体通过II类相位匹配产生2.12 μm激光的光参量振荡实验。对外腔及内腔进行了实验研究,分别获得了1.53%和2.86%的电光转换效率。在20 Hz频率下内腔2.12 μm输出能量达到70 mJ以上,脉宽7 ns~9 ns。其中内腔实验中能量输出稳定度接近8%。     

光磁共振实验中扫场及水平场取值关系的探讨

在光磁共振实验中,常常有抽运信号与共振信号同时存在的情况,这严重影响到实验的观察和测量.本文利用扫场及水平场大小对抽运信号的影响,通过理论分析和实验测量得到抽运和共振信号不同时存在时扫场和水平场的取值关系.从而有效避免抽运信号对共振信号的干扰,以及对总磁场方向误判的情况,保证了实验的顺利进行和准确测量.     

Lagrange方法基于保正性的时间步长

对交错网格上Lagrange预估-校正显示格式的时间步长选取提出新的方法.与经典CFL稳定性理论时间步长选取方法不同,新方法考虑了原始微分方程组的非线性效应,并基于物理量保正性给出了自适应的时间步长选取方法.数值实验验证了该方法有效.     

Radiative phonon transport in silicon and collisional energy transfer in aluminum films due to laser short-pulse heating: Influence of laser pulse intensity on temperature distribution

Energy transfer across aluminum and silicon films through phonon transport is examined in line with the laser short-pulse interaction with the aluminum film. The modified two-equation model is incorporated to compute electron and lattice site temperatures in the aluminum film while phonon radiative transport is used to predict equilibrium temperature in the silicon film. The thermal boundary resistance is considered at the interface of the films in the analysis. The numerical scheme using the finite difference method is adopted to solve the governing equations of energy. It is found that lattice site temperature rise is gradual in the aluminum film in the late heating period. However, equilibrium temperature decay is sharp in the region of silicon interface during this period. The thermal boundary resistance lowers lattice site temperature considerably in the region of the aluminum interface.     

Diode-pumped Q-switched and mode-locked Nd:Gd0.3Lu0.33Y0.37VO4 laser with EO modulator and single-walled carbon nanotube

By using both the single-walled carbon nanotube saturable absorber (SWCNT-SA) and the electro-optic (EO) modulator, the stably doubly Q-switched and mode-locked (QML) operation of Nd:Gd_0.3Lu_0.33Y_0.37VO₄ laser has been demonstrated. The QML laser characteristics such as the pulse width, single-pulse energy, etc., have been measured for different modulation frequencies of the EO modulator (f_e) and reflectivity (R) of output coupler. In comparison with the solely passively QML laser with SWCNT-SA, the experimental results show that the doubly QML laser can generate more stable and shorter pulses with higher pulse energy. At 9.24 W pump power, f_e=1 kHz and R=93.5%, the doubly QML laser has compressed the Q-switched envelope pulse width 88% and improved the mode-locked pulsed energy 55 times.