MAA存在下VAc/BA核壳乳液聚合过程中的胶粒形态研究

用ＴＥＭ和电位滴定法对不同配方和工艺条件得到的胶粒形态结构和羧基分别进行了表征。结果表明：加入甲基丙烯酸有利于胶粒的稳定和形成规则的核壳胶粒。半连续加料不会形成完全反转的核壳结构,但是,核层在反应过程中由于聚合物簇的迁移会造成形变。由于胶粒中聚合物浓度高,粘度大,因而胶粒形态变化受动力学影响甚大,羧基分布主要是由动力学确定的。     

磁性纳米固体酸SO42--TiO2-Fe3O4催化剂的合成、表征及催化性能的研究

首先研究制备了Fe3O4和SO42--TiO2固体酸催化剂,在此基础上采用共沉淀和浸渍的方法制备了磁性和超细SO42--TiO2-Fe3O4固体酸催化剂。利用XRD,TEM和FT-IR等分析测试手段对催化剂的结构和性能进行了表征。测定结果证实该催化剂具有较小的粒度,较高的磁性表现。在乙酸丁酯合成反应中SO42--TiO2-Fe3O4展示了很高的催化活性(酯化率可达82.7%),而且利用Fe3O4的磁性可对催化剂进行分离和回收.     

SiO2包覆纳米CaCO3的透射电镜表征

在透射电子显微镜（TEM）电子衍射模式下，用适当孔径的物镜光阑选择非晶态SiO2的衍射区域，拍摄以溶胶一凝胶法制备的SiO2包覆纳米CaCO3的暗场像。与未经包覆SiO2的纳米CaCO3的暗场像作对比，可以看出经过SiO2包覆的纳米CaCO3粒子周围有一白色亮环，从而得到SiO3包覆层的暗场照片。用高分辨方法观察了包覆层与CaCO3粒子间的界面情况。     

Photovoltaic Characteristics of a Naphthylamine Derivative

Organic photovoltaic （OPV） cells were fabricated via vacuum vapor deposition with {4-[2-（3-di-cyanomethylidene-5,5-dimethylcyclohexenyl）vinyl]phenyl}di（1-naphthyl）amine （DNP-2CN） as the electron donor, and fullerene （C60） as the electron acceptor. A thin film （10 nm） of tris（8-quinolinolato）aluminum （Alq3） was adopted as the buffer layer. A device based on this DNP-2CN exhibited an open circuit voltage （Voc） of 370 mV, a short-circuit current density （Jsc） of 0.61 mAocm 2, and a white-light power conversion efficiency （ η） of 0.09% （AM1.5, 75 mW.cm^- 2）.     

Synthesis and Characterization of Novel Polyimides Based on Pyridine-containing Diamine

A new aromatic diamine monomer containing pyridine unit, 2,6-bis （4-aminophenoxy- 4＇-benzoyl）pyridine（BABP）, was synthesized in three steps, starting from 2,6-pyridinedicarboxyl chloride. A series of novel pyridine-containing polyimides were prepared v/a the polycondensation of BABP with various aromatic dianhydrides through poly（amic acid） precursors, and thermal or chemical imidization of the precursors. The polyimides exhibit desirable properties, e.g., good solubility in N-methyl-2-pyrrolidone and m-cresol, excellent thermal stability and film-forming capability, as well as high inherent viscosity, indicating high molecular weight.     

Synthesis and Structure of 〔Cu(μ-C_6H_5COO)_2(C_4H_8O)〕_2

1mTRODUCT1ONBinuclearcoppercomplexesareimportantnotonlyincoordinationchemistryandmagnetostructuralstudiesbutalsoinpracticalapplication.tliInanattempttoseekthedisPersionandemulationreagentsofCWM(themixtureofcoalandwater),thetitlecomP0undwassynthesizedbyanoxidativepreparationmethodt2i,whosesynthesisandstructurearedifferentfromthosedescribedbyWangetoft3i.Here,0nlythesynthesisandstructureofthetitlecomP0undarereportedandthestudiesofitsappli-cationareinprogress.2EXPERIMENTAL2.1Preparati0n…     

Preparation of Co3O4 Nanofibers via an Electrospinning Technique

Thin PVA/cobalt acetate composite fibers were prepared by using sol-gel processing and electrospinning technique.After calcination of the above precursor fibers,Co3O4 nanofibers with a diameter of 50-150 nm could be successfully obtained.The fibers were characterized by SEM,FT-IR,WAXD,respectively.     

Zr柱撑蒙脱土上负载稀土铈及铜铈催化剂的制备与表征

The Zr-pillaraed montmorillonite supported Ce and Cu-Ce catalysts were prepared by impregnation method. The performance of the catalysts was evaluated via the catalytic oxidation of volatile organic compounds (acetone, ethyl acetate, and toluene). The results showed that after supporting with Ce and Cu-Ce, the catalysts had a better reducibility. Moreover, the surface areas of the samples were increased. In addition，it was found that the Zr-pillared montmorillonite supported Cu-Ce catalysts had a higher activity and the reaction temperature decreased by 150～200 ℃ compared with the sample without Cu-Ce modification.     

对氟苯甲醛水杨酰腙镍(II)配合物的合成、表征及其晶体结构

A nickel(II) complex Ni(C₁₄H₁₀N₂O₂F)₂ was synthesized from p-fluorobenzaldehyde salicylhydrazone and Ni(CH₃COO)₂·4H₂O and crystallized by diffusion, the structure of which was characterized by IR spectrum, ¹H NMR, and X-ray single-crystal diffraction. The complex crystallizes in monoclinic space group C2/c with a=2.460 6(2) nm, b=0.774 1(1) nm, c=1.534 9(1) nm, β=122.300(1)°, and V=2.471 1(4), Z=8, D_c=1.541 g·cm^-3. We reported the IR, ¹H NMR, crystal structure. CCDC: 638652.     

MoO3—SiO2表面复合物金属催化剂载体的制备与表征

采用ＭｏＯＣｌ４的盐酸溶液负载于ＳｉＯ２的表面反应法，制备了负载型和键联型两种ＭｏＯ３－ＳｉＯ２（ＭｏＳＯ）表面复合物载体。利用红外光谱法研究了ＭｏＳＯ的表面构造及其化学吸附性能；并利用ＴＰＲ技术考察了该表面复合物载体对负载金属Ｐｄ，Ｃｕ氧化物还原过程的影响。