Characterisation and effect of polymer network deformation in reverse-mode polymer-stabilised cholesteric texture

In reverse-mode polymer-stabilised cholesteric texture (PSCT), the dynamic response is derived from local director reorientation governed by dielectric coupling effect/self-assembly and polymer network deformation. A double exponential rise/decay model is proposed to investigate the underlying physical mechanisms. Through simulation of the transient rise and decay processes, the polymer network deformation in PSCT can be quantitatively evaluated. Less deformation and faster restoration speed of the polymer network can suppress hysteresis. These results provide useful guidelines for future PSCT fabrication and performance optimisation.     

TiO_2/Mn-ZSM-5复合催化剂的光催化-臭氧耦合降解乙醛

采用离子交换法制备了Mn-ZSM-5系列催化剂,并利用浸渍法制备了TiO2/Mn-ZSM-5系列复合催化剂.通过Uv-Vis、BET、X射线衍射等手段对催化剂进行了表征,考察了臭氧存在下乙醛的降解性能.结果表明:臭氧能显著促进乙醛的光催化降解,在所制备的催化剂中TiO2/Mn-ZSM-5(1:2)对乙醛降解具有最好的活性,这归功于这种复合催化剂对臭氧和乙醛的吸附和催化协同效应.     

Nonenzymatic Electrochemical Glucose Sensor Based on Pt Nanoparticles/Mesoporous Carbon Matrix

A nonenzymatic amperometric sensor for sensitive and selective detection of glucose has been constructed by using highly dispersed Pt nanoparticles supported onto mesoporous carbons (MCs). The Pt nanoparticles/mesoporous carbons (Pt/MCs) composites modified electrode displayed high electrocatalytic activity towards the oxidation of glucose. At an applied potential of 0.1 V, the Pt/MCs electrode has a linear dependence (R=0.996) in the glucose concentration up to 7.5 mM with a sensitivity of 8.52 mA M^?1 cm^?2. The Pt/MCs electrode has also shown highly resistant toward poisoning by chloride ions and without interference from the oxidation of common interfering species.     

Synthesis,Crystal Structure and Luminescent Properties of One Coordination Polymer of Copper(II) Achieved from Pyridine-3,5-dicarboxylate

Abstract  

A new Cu(II) coordination polymer [Cu(3,5-pdc)(H₂O)₄·H₂O] _n 1 (3,5-pdc=3,5-pyridinedicarboxylic acid) has been synthesized by hydrothermal method and characterized by IR, elemental analysis, TG technique and X-ray crystallography. The crystallographic data for the compound 1: monoclinic P2₁/n, a = 11.361(5) ?, b = 7.095(3) ?, c = 14.575(6) ?, β = 107.630(4)°, V = 1,119.7(8) ?³, Z = 4, Dc = 1.891 Mg/m³, F(000) = 652, R ₁ = 0.0374, wR ₂ = 0.1083. Cu(II) atom has an distorted octahedral environment with N₂O₄ donor set of Cu(1) and O₆ donor set of Cu(2), respectively. Each ligand is bound to two Cu(II) ions and each copper atom is coordinated by two ligands thereby generating a 1D zigzag chain. The 1D chain was interacted each other feathering three-dimensional supramolecular network through π···π interactions and multiform intermolecular hydrogen bonds. The luminescent properties of the title complex in the solid state were investigated.     

High efficiency top-emitting white organic light-emitting devices with a (metal/organic)2 cathode

White top-emitting organic light-emitting devices (TEOLEDs) were fabricated on a glass substrate with metal/organic multilayer of (Ag/Alq₃)₂ (Alq₃ is tris-(8-hydroxyquinoline) aluminum) as cathode. White TEOLEDs with high efficiency were obtained due to the microcavity effects. And the (Ag/Alq₃)₂ cathode, which adjusted the optical characteristics of the devices, played an important role. In addition, Alq₃–Ag–Alq₃ multilayer could work as a buffer layer, which would simplify the process of encapsulation for devices. We also calculated the electroluminescence spectrum of devices encapsulated with Al₂O₃ (150 nm) and Al₂O₃(75 nm)/ZrO₂(75 nm). And the results indicated that the CIE coordinates is almost the same between with and without encapsulating.     

Synthesis of titanium nitride thin films deposited by a new shielded arc ion plating

Thin films of titanium nitride (TiN) were deposited on stainless steel substrates by a modified deposition technique, double-layered shielded arc ion plating with vicarious circular holes (DL-SAIP). The results show that the TiN film with the distance of 10 mm between the double-layered shield plates had the least droplets. The deposition rate of the films prepared with the new technique was more homogeneous than that of all the other shielded arc ion plating. The film/substrate adhesion and microhardness values of the TiN films were higher than 40 N and 18 GPa, respectively. Thus such TiN thin films can be expected in applications.     

Waveguide invariance structure for low frequency monostatic bottom reverberation mitigation in shallow water

The stable range-frequency interference structure(waveguide invariance) of the low frequency monostatic bottom reverberation in shallow water is derived theoretically in this paper by using ray-normal mode coherent reverberation model and separable bottom scattering model.And combined the concept of spectral subtraction,a reverberation forecasting and mitigating method based on the waveguide invariance is presented.According to the waveguide invariance,the reverberation intensity for a detecting range can be estimated from the reverberation returns scattered from some other range cells nearby the detecting range with frequency shift.Then the reverberation component for the detecting range in the echo can be canceled mostly by using the estimated reverberation intensity,so as to enhance the echo-to-reverberation ratio and improve the detection capability of the active sonar.Simulations in typical horizontal layered shallow water environment show the stability of waveguide invariance structure in the low frequency monostatic bottom reverberation and the efficiency of the reverberation forecasting and mitigating method based on the waveguide invariance.     

投资连结型寿险的初始准备金和定价

利用VaR思想并根据保险人风险收益,在初始准备金收益率固定或随机的情况下,讨论了具有养老金性质的投资连结保单的初始准备金和定价,并进行了模拟计算.     

黑白胶片光栅编码彩色摄影术

用空间光栅将彩色景物记录到一张黑白胶片上（这一过程称为将彩色景物编码，所得的黑白透明片称为编码片）并通过再现（称为解码）装置再现彩色景物的思想和技术可以追溯到１８９９年，已有近百年的历史，开始时，类似于电子学中用时间信号调制载波方法，用彩色图像来调制光栅，十多年后便出现第一个萧条时期，持续将近半个世纪，期间比较重要的成果是有三个光栅进行三次编码记录的方法，到本世纪六十年代，又兴旺了一段时间，其中最     

矩形域上散乱数据多元最优插值的误差估计及其超收敛性（Ⅰ）──带连续边界条件

本文我们讨论了矩形域上带连续边界条件的一类多元散乱数据最优插值。给出了某些情形插值的误差估计，误差估计表明在某些点上还具有超收敛性。