LC-ESI-MS-MS Method for Monitoring Dopamine,Serotonin and Their Metabolites in Brain Tissue

A rapid and precise LC-ESI-MS-MS method for the parallel identification and quantification of dopamine, serotonin and their metabolites (homovanillic acid, 3-methoxytyramine, 3,4-dihydroxyphenylacetic acid and 5-hydroxyindolacetic acid) from rat brain tissue without any pre-analysis adjustment of the sample such as pre-concentration or derivatization has been developed. In particular, the reaction-monitoring mode was selected for its extremely high degree of selectivity and the stable-isotope-dilution assay for its high precision of quantification. Alternation the ionization polarity in the course of mass spectrometry detection enabled to determine substances susceptible to various ionization modes in only one analysis run. This fact, in combination with an easy pre-treatment step, constitutes the method straightforward and time undemanding. The developed method was characterized with a high precision (≤19.5%, determined as RSD), an acceptable accuracy (≥82.0%, determined as recovery), a low limit of detection (≤0.40 ng/100 mg brain tissue) and a low limit of quantification (≤0.42 ng/100 mg brain tissue). The method has been applied in a recent animal study. The levels of the studied neurotransmitters have been determined in the rat brain hippocampus, prefrontal cortex, and striatum in an animal model of schizophrenia induced by an acute dose of a dizocilpine.     

A study of π andK production in proton-uranium and oxygen-uranium interactions at 22 GeV/A using decay muons

The like-sign dimuons copiously recorded in the NA 38 experiment both inp-U and O?U reactions at 200 GeV/nucleon are interpreted as resulting from decays of π andK mesons in comparable proportions. The ++/?? ratio is large (?1.7) and ascribed to theK ⁺ being more copiously produced than theK ^?. Both the average transverse momentum and the ++/?? ratio are comparable forp-U and O?U reactions, and both increase only slightly with the transverse energyE _T .     

Phase-field modeling of the effect of interfacial energy on pyrolytic carbon morphology in chemical vapor deposition

A conserved phase-field model is proposed to investigate the effect of interfacial energy on the morphological evolution of the pyrolytic carbon deposit in chemical vapor deposition. The equilibrium geometry of carbon deposit islands is analytically predicted, of which the contact angle was controlled through the boundary conditions of the phase-field parameter at the substrate surface according to the Young-Laplace equation. Simulations of deposit growth are carried out for single and multi island nucleation. It is clarified that the island morphology depends on the magnitude of the interface energy. It is also observed that high interface energy results in large island size fluctuation. (© 2010 Wiley-VCH Verlag GmbH & Co. KGaA, Weinheim)     

On reduction of the drug diflunisal in non-aqueous media

Monatshefte für Chemie - Chemical Monthly - The electrochemical reduction of diflunisal was studied in dimethyl sulfoxide on static mercury drop electrode. Diflunisal yields one irreversible...     

Voltametric,Amperometric, and Chronopotentiometric Determination of Submicromolar Concentrations of Carboxin

New procedures for the determination of pesticide carboxin were developed using differential pulse voltammetry, HPLC with amperometric detection and chronopotentiometry at carbon paste electrode and reticulated vitreous carbon electrode, respectively. Developed procedures based on electrochemical oxidation of carboxin were successfully applied on the determination of carboxin in the model samples of drinking and river water. Limits of detection in samples of river water were in 10^?7 mol L^?1 concentration range for all procedures and electrodes used. All developed procedures proved to be sensitive, accurate and, due to the resistance of the electrode to the passivation, also simple to handle.     

Chirality in the Absence of Rigid Stereogenic Elements: The Absolute Configuration of Residual Enantiomers of C3‐Symmetric Propellers

Two new tris(aryl)phosphane oxides existing as configurationally stable residual enantiomers have been synthesised and their racemates resolved by semipreparative HPLC on a chiral stationary phase (CSP HPLC). One of them, recognised as a conglomerate, could be resolved by fractional crystallisation at a preparative scale level. In this case, the absolute configuration of the propeller‐shaped molecule was determined by anomalous X‐ray scattering. The problem of the correlative assignment of the absolute configuration to all known C₃‐symmetric three‐bladed propeller‐shaped molecules existing as stable residual enantiomers is discussed. The configurational stability of the new chiral phosphane oxides and of the corresponding phosphanes was evaluated by CD signal decay kinetics and dynamic ¹H NMR spectroscopy. The racemisation barriers in phosphanes were found about 10 kcal mol^?1 lower than those found for the corresponding oxides, though geometry and inter‐ring gearing would be very similar in the two series. Configurational stability of residual tris(aryl)phosphanes was found to be influenced by the electronic availability of the phosphorus centre, as evaluated by electrochemical CV experiments.     

Lanthanide(III) Complexes of 2‐[4,7,10‐Tris(phosphonomethyl)‐1,4,7,10‐tetraazacyclododecan‐1‐yl]acetic Acid (H7DOA3P): Multinuclear‐NMR and Kinetic Studies

The protonation constants of 2‐[4,7,10‐tris(phosphonomethyl)‐1,4,7,10‐tetraazacyclododecan‐1‐yl]acetic acid (H₇DOA3P) and of the complexes [Ln(DOA3P)]^4? (Ln=Ce, Pr, Sm, Eu, and Yb) have been determined by multinuclear NMR spectroscopy in the range pD 2–13.8, without control of ionic strength. Seven out of eleven protonation steps were detected (pK =13.66, 12.11, 7.19, 6.15, 5.77, 2.99, and 1.99), and the values found compare well with the ones recently determined by potentiometry for H₇DOA3P, and for other related ligands. The overall basicity of H₇DOA3P is higher than that of H₄DOTA and trans‐H₆DO2A2P but lower than that of H₈DOTP. Based on multinuclear‐NMR spectroscopy, the protonation sequence for H₇DOA3P was also tentatively assigned. Three protonation constants (pK_MHL, pK_MH2L, and pK_MH3L) were determined for the lanthanide complexes, and the values found are relatively high, although lower than the protonation constants of the related ligand (pK , pK , and pK ), indicating that the coordinated phosphonate groups in these complexes are protonated. The acid‐assisted dissociation of [Ln(DOA3P)]^4? (Ln=Ce, Eu), in the region c_H+=0.05–3.00 mol dm^?3 and at different temperatures (25–60°), indicated that they have slightly the same kinetic inertness, being the [Eu(H₂O)₉]³⁺ aqua ion the final product for europium. The rates of complex formation for [Ln(DOA3P)]^4? (Ln=Ce, Eu) were studied by UV/VIS spectroscopy in the pH range 5.6–6.8. The reaction intermediate [Eu(DOA3P)]* as ‘out‐of‐cage’ complex contains four H₂O molecules, while the final product, [Eu(DOA3P)]^4?, does not contain any H₂O molecule, as proved by steady‐state/time‐resolved luminescence spectroscopy.     

Thermogravimetry as a possible tool for determining modification degree of thermally treated Norway spruce wood

Thermal treatment is one of environmental friendly wood modification processes, developed in order to improve wood’s natural durability and dimensional stability. Beside wood species, mainly isothermal temperature of heat-treatment and process duration affect these properties, which also correlate with the mass losses caused by the treatment. However, there is a lack of suitable external quality control methods. In this work thermogravimetry as a potential method for determining the degree of thermal modification is presented. Several calibration curves, representing the mass losses in a certain temperature range (the values obtained from the TG curves) compared to weight losses caused by previous heat-treatment (known values), were established for spruce wood samples modified at different isothermal temperatures (from 170 to 220 °C). Linear plot and good correlation factors (R ² = 0.95 and 0.96) were obtained for the TG mass losses from 130 to 280 °C and from 130 to 300 °C, both under nitrogen atmosphere. The predominant cause of mass loss in this temperature region was depolymerisation and thermal decomposition of hemicelluloses residues. Lower correlation factors were obtained under the air atmosphere and in the wider temperature range, respectively.     

Inelastic behavior of the single domain of metal-ceramic composites with lamellar microstructure

Metal-ceramic composites are widely applied in the different brunches of industry. The composites are produced by squeeze-casting of the ceramic preform by molten aluminum alloy. The lamellar microstructure is obtained during freezing of ceramic suspension. The internal structure of the domains can be controlled via freeze-casting parameters. The material has high anisotropy level and its effective properties depend on lamella orientation. The aim of this study is numerical simulation of the inelastic behavior of the material and its verification by experiment. (© 2011 Wiley-VCH Verlag GmbH & Co. KGaA, Weinheim)     

Separation of bacteria with imprinted polymeric films

Separation of compounds out of complex mixtures is a key issue that has been solved for small molecules by chromatography. However, general methods for the separation of large bio-particles, such as cells, are still challenging. We demonstrate integration of imprinted polymeric films (IPF) into a microfluidic chip, which preferentially capture cells matching an imprint template, and separate strains of cyanobacteria with 80-90% efficiency, despite a minimal difference in morphology and fluorescence, demonstrating its general nature. It is currently thought that the imprinting process, conducted while the polymer cures, transfers chemical information of the cell's external structure to the substrate. Capture specificity and separation can be further enhanced by orienting the imprints parallel to the flow vector and tuning the pH to a lower range.