Energy and Acid-Base Characteristics of the Surface of Nitramine Fillers for Polymeric Composites

Single crystals of nitramine fillers for special-purpose polymeric composites are characterized by the surface energy and its constituents and also by the acidity of their surface.     

Thiol–norbornene materials: Approaches to develop high Tg thiol–ene polymers

The ability to prepare high T_g low shrinkage thiol–ene materials is attractive for applications such as coatings and dental restoratives. However, thiol and nonacrylated vinyl materials typically consist of a flexible backbone, limiting the utility of these polymers. Hence, it is of importance to synthesize and investigate thiol and vinyl materials of varying backbone chemistry and stiffness. Here, we investigate the effect of backbone chemistry and functionality of norbornene resins on polymerization kinetics and glass transition temperature (T_g) for several thiol–norbornene materials. Results indicate that T_gs as high as 94 °C are achievable in thiol–norbornene resins of appropriately controlled chemistry. Furthermore, both the backbone chemistry and the norbornene moiety are important factors in the development of high T_g materials. In particular, as much as a 70 °C increase in T_g was observed in a norbornene–thiol specimen when compared with a sample prepared using allyl ether monomer of analogous backbone chemistry. © 2007 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 45: 5686–5696, 2007     

Thermolyzable polymer networks and star polymers containing a novel,compact, degradable acylal‐based dimethacrylate cross‐linker: Synthesis,characterization, and thermolysis

A compact, cleavable acylal dimethacrylate cross‐linker, 1,1‐ethylenediol dimethacrylate (EDDMA), was synthesized from the anhydrous iron(III) chloride‐catalyzed reaction between methacrylic anhydride and acetaldehyde. The ability of EDDMA to act as cross‐linker was demonstrated by using it for the preparation of one neat cross‐linker network, four star polymers of methyl methacrylate (MMA), and four randomly cross‐linked MMA polymer networks using group transfer polymerization (GTP). For comparison, the corresponding polymer structures based on the commercially available ethylene glycol dimethacrylate (EGDMA) cross‐linker (isomer of EDDMA) were also prepared via GTP. The number of arms of the EDDMA‐based star polymers was lower than that of the corresponding EGDMA polymers, whereas the degrees of swelling in tetrahydrofuran of the EDDMA‐based MMA networks were higher than those of their EGDMA‐based counterparts. Although none of the EDDMA‐containing polymers could be cleanly hydrolyzed under basic or acidic conditions, they could be thermolyzed at 200 °C within 1 day giving lower molecular weight products. © 2007 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 45: 5811–5823, 2007     

Ionization of two-electron atom in ultrashort laser pulse

The method of numerical integration of the classical equations of motion was used to study interaction of a model two-electron atom with ultrashort laser pulses. Mechanisms and specific features of the ionization process were analyzed in a broad range of laser-field parameters.     

Fluid-fluid phase separation in colloid-polymer mixtures studied with small angle light scattering and light microscopy

Mixtures of colloidal silica spheres and polydimethylsiloxane in cyclohexane with a colloid-polymer size ratio of about one were found to phase separate into two fluid phases, one which is colloid-rich and one which is colloid-poor. In this work the phase separation kinetics of this fluid-fluid phase separation is studied for different compositions of the colloid-polymer mixtures, and at several degrees of supersaturation, with small angle light scattering and with light microscopy. The small angle light scattering curve exhibits a peak that grows in intensity and that shifts to smaller wave vector with time. The characteristic length scale that is obtained from the scattering peak is of the order of a few μm, in agreement with observations by light microscopy. The domain size increases with time as , which might be an indication of coarsening by diffusion and coalescence, like in the case of binary liquid mixtures and polymer blends. For sufficiently low degrees of supersaturation the angular scattering intensity curves satisfy dynamical scaling behavior.     

Compact Lie groups and factor spaces with respect to tori

Translated from Matematicheskie Zametki, Vol. 54, No. 7, pp. 124–135, July, 1993.     

Extension of multigrid methodology to supersonic/hypersonic 3-D viscous flows

A multigrid acceleration technique developed for solving the three-dimensional Navier–Stokes equations for subsonic/transonic flows has been extended to supersonic/hypersonic flows. An explicit multistage Runge–Kutta type of time-stepping scheme is used as the basic algorithm in conjunction with the multigrid scheme. Solutions have been obtained for a blunt conical frustum at Mach 6 to demonstrate the applicability of the multigrid scheme to high-speed flows. Computations have also been performed for a generic High-Speed Civil Transport configuration designed to cruise at Mach 3. These solutions demonstrate both the efficiency and accuracy of the present scheme for computing high-speed viscous flows over configurations of practical interest.     

Use of reference materials in coastal monitoring quality assurance

The NOAA National Status and Trends (NS&T) Program determines the current status of, and changes over time in the environmental health of U.S estuarine and coastal waters. Concentrations of organic and inorganic contaminants are determined in bivalves, bottom-dwelling fish and sediments. The quality of the analytical data generated by the NS&T Program is over-seen by the performance-based Quality Assurance Project, which is designed to document sampling protocols, analytical procedures, and laboratory performance, and to reduce intralaboratory and interlaboratory variation. All NS&T cooperating laboratories are required to participate in yearly intercomparison exercises. The analysis of reference materials, such as the National Research Council of Canada's Certified Reference Materials (CRMs) and National Institute of Standards and Technology's (NIST) Standard Reference Materials (SRMs), and of control materials, is required. Because of the need for marine matrix reference materials and standards, NOAA contributed to the production of eight NIST SRMs and seven internal standard solutions. Analytical data from all control materials and all matrix reference materials are reported to the Program office.     

Recurrence of trajectories of systems of linear differential equations with conditionally periodic coefficients

Translated from Matematicheskie Zametki, Vol. 54, No. 1, pp. 52–56, July, 1993.